Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007611A0000 ABB PPEB1860 IP30/IP40 External Panel 1800 mm × 600 mm – System Pro E Power
ABB PPEB1860 IP30/IP40 external panel measuring 1800 mm high and 600 mm wide, designed for integration into compatible ABB System Pro E Power low-voltage switchboard enclosures.
£143.75
Why Choose the ABB PPEB1860 IP30/IP40 External Panel?
The ABB PPEB1860 is a dedicated IP30/IP40 external panel measuring 1800 mm in height and 600 mm in width, designed for integration into compatible ABB System Pro E Power low-voltage switchboard assemblies. Identified by ABB order code 1STQ007611A0000, this genuine ABB enclosure accessory provides an external covering component for modular electrical distribution systems.
As part of the comprehensive ABB System Pro E Power range, the PPEB1860 supports the construction of industrial and commercial low-voltage switchboards. Its IP30/IP40 designation identifies it for use in appropriately configured enclosure assemblies requiring protection against access to internal electrical equipment and the ingress of solid objects, with the achieved protection level depending on the complete enclosure configuration.
With a specified panel height of 1800 mm and panel width of 600 mm, the ABB PPEB1860 provides a dimensionally defined external panel for compatible switchboard structures. Its modular design supports professional enclosure assembly, consistent external finishing and accurate component selection for electrical distribution installations.
Key Advantages
- Genuine ABB System Pro E Power accessory: Designed for integration into compatible modular low-voltage switchboard assemblies.
- IP30/IP40 designation: Supports appropriately configured enclosure assemblies requiring defined protection against access and solid-object ingress.
- 1800 mm panel height: Suitable for compatible tall switchboard enclosure arrangements.
- 600 mm panel width: Provides a defined external covering dimension for suitable modular structures.
- External enclosure covering: Helps form a physical boundary between internal electrical equipment and accessible areas.
- Modular system integration: Complements compatible ABB System Pro E Power frames, doors and enclosure accessories.
- Professional switchboard appearance: Supports consistent external finishing of compatible electrical distribution assemblies.
- Clear manufacturer identification: ABB order code 1STQ007611A0000 supports accurate specification, procurement and replacement.
Key Features
- Manufacturer: ABB.
- Product designation: PPEB1860.
- ABB order code: 1STQ007611A0000.
- Product range: System Pro E Power.
- Product type: External enclosure panel.
- Specified protection designation: IP30/IP40.
- Nominal panel height: 1800 mm.
- Nominal panel width: 600 mm.
- Nominal dimensions (H × W): 1800 mm × 600 mm.
- Designed for external covering applications within compatible modular low-voltage switchboard assemblies.
- Supports the mechanical completion of appropriately configured electrical enclosures.
- Intended for integration with compatible ABB System Pro E Power supporting structures and associated enclosure components.
Reliable IP30/IP40 External Panel Protection for Low-Voltage Switchboards
External enclosure panels play an important role in the construction of low-voltage electrical switchboards. They form part of the physical enclosure surrounding electrical components, helping to separate internal equipment from accessible areas and supporting the intended mechanical arrangement of the completed assembly. Correct panel selection contributes to enclosure integrity, professional finishing and the required degree of protection.
The ABB PPEB1860 external panel is specifically identified for compatible System Pro E Power configurations requiring an 1800 mm high and 600 mm wide external covering component. These dimensions should be matched to the selected enclosure structure and the relevant mounting arrangement to ensure correct integration.
The product carries an IP30/IP40 designation. Under the IP Code, IP30 provides protection against access with a tool and ingress of solid foreign objects measuring 2.5 mm or larger, while IP40 provides protection against access with a wire and ingress of solid foreign objects measuring 1 mm or larger. Neither designation provides a specified level of protection against water ingress, as indicated by the final digit zero.
The protection level achieved by a completed switchboard depends on the entire enclosure assembly, including the selected structural components, external panels, doors, joints and cable-entry arrangements. The PPEB1860 must therefore be installed in accordance with the relevant ABB instructions, and the applicable IP30 or IP40 configuration must be verified for the finished assembly.
ABB System Pro E Power is a modular low-voltage switchboard platform used in industrial and commercial electrical distribution applications. Its range of enclosure frames, external panels, doors and installation accessories allows panel builders to develop suitable arrangements for different projects. The PPEB1860 complements this modular system by providing a dedicated external panel for compatible enclosure configurations.
The PPEB1860 is a mechanical enclosure accessory rather than a complete switchboard or electrical protective device. It does not independently determine the electrical ratings, short-circuit withstand performance or overall compliance of the completed installation. These characteristics must be assessed for the complete switchboard assembly.
Typical Applications
- Low-voltage distribution switchboards: Providing external panel covering within compatible ABB System Pro E Power assemblies.
- Industrial electrical installations: Supporting enclosed power distribution equipment in manufacturing and processing facilities.
- Commercial electrical infrastructure: Completing compatible modular electrical distribution enclosures.
- IP30/IP40 switchboard configurations: Supporting appropriately assembled enclosures requiring the specified protection against access and solid-object ingress.
- Electrical panel manufacturing: Providing a dimensionally specified external enclosure component for professional switchboard construction.
- Electrical plant rooms: Supporting suitable low-voltage switchboard installations in controlled indoor environments.
- Switchboard refurbishment: Replacing compatible external panels during approved maintenance or modification work.
- System Pro E Power projects: Integrating with compatible ABB enclosure frames, doors and associated installation accessories.
Technical Specifications
| Product series | System Pro E Power |
|---|---|
| ABB order code | 1STQ007611A0000 |
| Product type | External panel |
| Accessory category | Switchboard external enclosure panels |
| Specified protection designation | IP30/IP40 |
| Panel height | 1800 mm |
| Panel width | 600 mm |
| Nominal dimensions (H × W) | 1800 mm × 600 mm |
| Installation position | External enclosure panel |
| Primary application | Low-voltage switchboard enclosure construction |
| System compatibility | ABB System Pro E Power, subject to assembly configuration |
| Installation arrangement | Mechanical integration with compatible switchboard structures |
| Manufacturer part number | 1STQ007611A0000 |
Frequently Asked Questions
What is the ABB PPEB1860 used for?
The ABB PPEB1860 is an IP30/IP40 external panel designed for compatible ABB System Pro E Power low-voltage switchboard assemblies. It forms part of the external enclosure covering and supports the construction of modular electrical distribution equipment.
What are the dimensions of the ABB PPEB1860 external panel?
The PPEB1860 measures 1800 mm in height and 600 mm in width. These dimensions should be matched to the intended ABB System Pro E Power enclosure configuration. A separate depth dimension is not established by the supplied product specification.
What is the difference between IP30 and IP40 protection?
IP30 provides protection against access with a tool and solid foreign objects measuring 2.5 mm or larger, while IP40 provides protection against access with a wire and solid foreign objects measuring 1 mm or larger. Neither rating specifies protection against water ingress. The actual protection level depends on the complete enclosure assembly.
Is the ABB PPEB1860 suitable for outdoor installations?
The PPEB1860 is designated IP30/IP40, and neither protection level includes water-ingress protection. Outdoor suitability is therefore not established by this designation. Installations exposed to rain, moisture or other environmental hazards require an appropriately rated complete enclosure and confirmation against the relevant ABB specifications.
Is the ABB PPEB1860 compatible with every System Pro E Power enclosure?
The PPEB1860 belongs to the ABB System Pro E Power accessory range, but compatibility depends on the enclosure dimensions, structural configuration, mounting arrangement and associated components. The relevant ABB assembly documentation should be checked before selection and installation.
Trusted ABB Components for Professional Switchboard Construction
ABB System Pro E Power enclosure accessories, including the PPEB1860 IP30/IP40 external panel, support professional electrical panel builders and switchboard manufacturers in creating organised, modular and appropriately configured low-voltage power distribution assemblies.
