Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007581A0000 ABB PPEB1876 IP65 External Panel 1800 mm High × 700 mm Deep – System Pro E Power
ABB PPEB1876 IP65 external panel specified for 1800 mm height and 700 mm enclosure depth, designed for integration into compatible ABB System Pro E Power low-voltage switchboard assemblies.
£178.15
Why Choose the ABB PPEB1876 IP65 External Panel?
The ABB PPEB1876 is an IP65 external panel with a specified height of 1800 mm and depth of 700 mm, designed for integration into compatible ABB System Pro E Power low-voltage switchboard assemblies. Identified by ABB order code 1STQ007581A0000, this enclosure accessory is intended for applications requiring a suitably dimensioned external panel as part of a modular electrical distribution system.
As part of the ABB System Pro E Power range, the PPEB1876 supports the construction of industrial and commercial switchboard enclosures where external panel protection and mechanical compatibility are important considerations. Its IP65 designation identifies it for use in appropriately configured assemblies requiring protection against dust ingress and water jets, subject to the complete enclosure design and correct installation.
With a specified 1800 mm height and 700 mm depth, the ABB PPEB1876 is intended for compatible switchboard configurations matching these dimensions. Its external panel design supports enclosure completion, helps provide a protective physical boundary around internal electrical equipment and contributes to a professional, consistent switchboard installation.
Key Advantages
- Genuine ABB System Pro E Power accessory: Designed for compatible modular low-voltage switchboard assemblies.
- IP65 designation: Intended for appropriately assembled enclosures requiring dust-tight protection and resistance to water jets.
- 1800 mm panel height: Suitable for compatible full-height switchboard arrangements requiring this dimension.
- 700 mm depth compatibility: Supports integration into appropriately dimensioned enclosure configurations.
- External panel construction: Provides a physical enclosure boundary for suitable switchboard installations.
- Modular system integration: Complements ABB System Pro E Power frames, panels and enclosure accessories.
- Professional enclosure finishing: Helps create a consistent external appearance across compatible switchboard assemblies.
- Practical for industrial distribution: Supports electrical panel builders working with enclosed low-voltage power distribution equipment.
Key Features
- Manufacturer: ABB.
- Product designation: PPEB1876.
- ABB order code: 1STQ007581A0000.
- Product range: System Pro E Power.
- Product type: External enclosure panel.
- Specified protection designation: IP65.
- Nominal panel height: 1800 mm.
- Compatible enclosure depth: 700 mm.
- Panel configuration: External panel for compatible switchboard assemblies.
- Designed to form part of the external covering of a suitable modular enclosure.
- Supports physical separation between internal electrical equipment and the surrounding environment.
- Intended for installation with appropriate ABB System Pro E Power structures and associated enclosure components.
Reliable IP65 External Panel Protection for Low-Voltage Switchboards
External enclosure panels are important components in low-voltage switchboard construction. They help form the physical boundary of an electrical assembly, separating internal electrical components from the surrounding environment and supporting the intended mechanical arrangement of the enclosure. Correct panel selection is particularly important where the completed switchboard must achieve a specified degree of ingress protection.
The ABB PPEB1876 IP65 external panel is identified for compatible System Pro E Power configurations with an 1800 mm height and 700 mm depth. Its dimensional specification should be matched carefully to the intended enclosure structure, mounting arrangement and associated external panels before installation.
Under the IP Code, IP65 denotes protection against dust ingress and water jets. For a completed switchboard to achieve the intended protection level, the complete enclosure must be configured and installed using suitable compatible components, including any required seals, joints, doors and cable-entry arrangements. The PPEB1876 designation should not be interpreted as an independent guarantee of IP65 performance for an incorrectly assembled or modified enclosure.
ABB System Pro E Power is a modular low-voltage switchboard platform used in industrial and commercial power distribution applications. Its range of structural frames, enclosure panels, doors and installation accessories enables panel builders to develop assemblies for different installation requirements. The PPEB1876 complements this system by providing a specifically identified external panel for suitable IP65 enclosure arrangements.
The PPEB1876 is a mechanical enclosure accessory, not a complete switchboard or electrical protective device. Its suitability depends on the selected enclosure configuration and the manufacturer's assembly requirements. The finished installation must be assessed for its required electrical ratings, environmental protection, mechanical integrity and applicable safety standards.
Typical Applications
- Low-voltage power distribution switchboards: External panel integration into compatible ABB System Pro E Power assemblies.
- Industrial electrical installations: Supporting enclosed electrical distribution equipment in factory and plant environments.
- Commercial electrical infrastructure: Completing compatible switchboard enclosure configurations.
- IP65-designated switchboard assemblies: Providing an external panel for suitable enclosure systems requiring dust-tight and water-jet protection.
- Electrical panel manufacturing: Supporting professional assembly of modular low-voltage switchboards.
- Switchboard refurbishment: Replacing a matching external panel in an approved compatible enclosure configuration.
- Electrical plant rooms and equipment areas: Supporting suitably protected power distribution installations.
- System Pro E Power projects: Integration with compatible ABB frames, doors, seals and enclosure accessories.
Technical Specifications
| Product series | System Pro E Power |
|---|---|
| ABB order code | 1STQ007581A0000 |
| Product type | External panel |
| Accessory category | Switchboard external enclosure panels |
| Specified IP designation | IP65 |
| Panel height | 1800 mm |
| Specified enclosure depth | 700 mm |
| Nominal configuration (H × D) | 1800 mm × 700 mm |
| Installation position | External enclosure panel |
| Primary application | Low-voltage switchboard enclosure construction |
| System compatibility | ABB System Pro E Power, subject to assembly configuration |
| Installation arrangement | Mechanical integration with compatible enclosure structures |
| Manufacturer part number | 1STQ007581A0000 |
Frequently Asked Questions
What is the ABB PPEB1876 used for?
The ABB PPEB1876 is an IP65-designated external panel intended for compatible ABB System Pro E Power low-voltage switchboard assemblies. It forms part of the external enclosure covering and supports the construction of suitably protected electrical distribution equipment.
What are the dimensions of the ABB PPEB1876 external panel?
The PPEB1876 is specified with a height of 1800 mm and a depth of 700 mm. These dimensions should be matched to the intended System Pro E Power enclosure configuration. A separate panel width is not established by the supplied specification.
What does IP65 mean for the ABB PPEB1876?
IP65 indicates dust-tight protection and protection against water jets under the IP Code. The intended protection level of the completed switchboard depends on the correct assembly of all compatible enclosure components, including appropriate sealing and cable-entry arrangements.
Can the ABB PPEB1876 be used in outdoor electrical installations?
The PPEB1876 carries an IP65 designation, but this alone does not establish suitability for every outdoor environment. Outdoor installation also requires consideration of enclosure material, corrosion resistance, UV exposure, temperature, condensation and the complete assembly's environmental specifications. Suitability should be confirmed against the applicable ABB documentation.
Is the ABB PPEB1876 compatible with every System Pro E Power enclosure?
The PPEB1876 belongs to the ABB System Pro E Power accessory range, but compatibility depends on the enclosure height, depth, frame configuration and associated mounting and sealing components. The relevant ABB assembly instructions should be checked before selection and installation.
Trusted ABB Components for Professional Switchboard Construction
ABB System Pro E Power enclosure accessories, including the PPEB1876 IP65 external panel, support professional switchboard manufacturers and electrical panel builders in creating modular, organised and appropriately protected low-voltage power distribution assemblies.
