Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007579A0000 ABB PPEB1856 IP65 External Blind Side Panel 1800 x 500 mm System pro E Power
ABB PPEB1856 (1STQ007579A0000) is an IP65 external blind steel side panel for 1800 mm high and 500 mm deep ABB System pro E Power electrical switchboards, supplied individually with a sealing gasket and IP65 plugs.
£113.24
Why Choose the ABB PPEB1856 System pro E Power IP65 External Side Panel?
The ABB PPEB1856 (1STQ007579A0000) is a robust IP65 external blind side panel for low-voltage electrical distribution switchboards, designed specifically for the ABB System pro E Power range. With a nominal height of 1800 mm and compatibility with 500 mm deep enclosures, this steel panel provides a protective external covering for compatible industrial and commercial electrical distribution assemblies.
As part of the ABB System pro E Power switchboard system, the PPEB1856 is designed to close the side of a compatible electrical enclosure while supporting the protection requirements of an IP65-rated assembly. Its solid construction incorporates a sealing gasket and IP65 plugs, helping prevent dust ingress and protect internal electrical equipment against water jets when correctly installed as part of a suitably rated complete enclosure.
Manufactured from pickled sheet steel, the ABB PPEB1856 provides durable mechanical protection and a professional external finish. The panel is supplied as one individual side panel, allowing switchboard manufacturers to select the required quantity according to the enclosure configuration. Its dedicated design makes it suitable for electrical panel builders, installation contractors and maintenance engineers working with ABB System pro E Power distribution systems.
Key Advantages
- Genuine ABB System pro E Power external blind side panel designed for compatible low-voltage switchboards.
- IP65 protection capability when correctly installed within a suitably configured and rated enclosure assembly.
- 1800 mm nominal height for compatible full-height switchboard structures.
- 500 mm nominal enclosure depth for accurate side panel selection.
- Durable pickled sheet steel construction provides dependable mechanical protection.
- Integrated sealing gasket and IP65 plugs support effective enclosure sealing.
- Solid, non-ventilated construction helps protect internal electrical equipment from environmental exposure.
- Modular design allows straightforward integration with compatible ABB System pro E Power switchboard structures.
Key Features
- ABB System pro E Power low-voltage switchboard accessory.
- PPEB1856 external blind side panel designation.
- ABB order code 1STQ007579A0000.
- IP65-rated panel configuration for compatible sealed switchboard assemblies.
- 1800 mm nominal panel height.
- 500 mm nominal enclosure depth.
- Pickled sheet steel construction.
- Solid external side panel without ventilation openings.
- Sealing gasket supplied for the panel interface.
- IP65 plugs included for the intended sealing arrangement.
- Designed for installation on compatible ABB System pro E Power enclosure frames.
- Supplied as a single side panel rather than a complete enclosure or pair of panels.
Reliable IP65 Enclosure Protection for Electrical Distribution Systems
External blind side panels such as the ABB PPEB1856 are important components in the construction of protected electrical switchboard enclosures. They provide a solid external barrier between internal electrical equipment and the surrounding environment. The PPEB1856 incorporates a gasket and IP65 sealing plugs to support dust-tight construction and resistance to water jets when installed as part of a correctly assembled IP65 switchboard system.
The ABB System pro E Power platform is designed for modular low-voltage electrical distribution assemblies, allowing switchboard manufacturers to combine compatible enclosure frames, doors, external panels and internal equipment mounting systems. The PPEB1856 supports this modular approach through its 1800 mm height and 500 mm enclosure depth compatibility. As the product is a single external side panel, the complete IP65 protection rating depends on the correct selection and installation of all associated enclosure components, seals, doors and cable entry arrangements.
Typical Applications
- ABB System pro E Power IP65 low-voltage electrical switchboards.
- External side closure of industrial main distribution boards.
- Electrical distribution assemblies requiring enhanced dust and water ingress protection.
- Commercial and industrial power distribution enclosures.
- Factory electrical switchboards in environments exposed to dust or cleaning-related moisture.
- Electrical panel building and modular switchboard manufacturing.
- Replacement of compatible external side panels during enclosure maintenance.
- Construction and refurbishment of protected electrical distribution cabinets.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| Series | PPEB External Blind Side Panels |
| ABB order code | 1STQ007579A0000 |
| Product type | IP65 external blind side panel / switchboard enclosure accessory |
| Panel location | External side of switchboard enclosure |
| Nominal height | 1800 mm |
| Nominal enclosure depth | 500 mm |
| Protection rating | IP65, subject to correct assembly installation |
| Dust protection | Dust-tight enclosure configuration |
| Water protection | Protection against water jets |
| Material | Pickled sheet steel |
| Panel design | Solid, blind, non-ventilated |
| Sealing arrangement | Gasket and IP65 plugs |
| Mounting type | External side mounting to compatible enclosure structure |
| Compatible system | ABB System pro E Power |
| Application | External side closure for low-voltage electrical distribution switchboards |
| Package quantity | 1 piece |
Frequently Asked Questions
What is the ABB PPEB1856 (1STQ007579A0000) used for?
The ABB PPEB1856 is an external blind side panel designed to close the side of compatible ABB System pro E Power electrical distribution switchboards. It provides a solid steel barrier and incorporates sealing components to support IP65 enclosure protection.
What are the dimensions of the ABB PPEB1856 external side panel?
The ABB PPEB1856 is specified for a nominal enclosure height of 1800 mm and depth of 500 mm. The 500 mm measurement refers to the compatible enclosure depth and therefore the nominal horizontal coverage of the side panel, rather than the overall front width of the switchboard.
What does the IP65 rating mean for the ABB PPEB1856?
IP65 indicates a protection classification involving dust-tight construction and protection against water jets. The PPEB1856 includes the sealing features required for its intended IP65 panel arrangement, but the complete switchboard must be correctly assembled using compatible rated components to achieve the specified protection level.
What material is the ABB PPEB1856 manufactured from?
The panel is manufactured from pickled sheet steel and incorporates a sealing gasket and IP65 plugs. This combination provides a robust external enclosure covering with the sealing features required for compatible IP65 switchboard installations.
Does the ABB PPEB1856 include both side panels for a switchboard?
No. The ABB PPEB1856 (1STQ007579A0000) is supplied as one individual external blind side panel. Where both sides of a compatible enclosure require this panel, the appropriate quantity must be ordered separately according to the switchboard configuration.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power components provide a modular approach to professional low-voltage electrical distribution assemblies. The ABB PPEB1856 IP65 external blind side panel combines durable steel construction with dedicated sealing components, offering switchboard manufacturers and electrical installation professionals a dependable solution for protecting compatible industrial and commercial electrical enclosures.
