Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007556A0000 ABB PPMB2010 Blind Mounting Plate 200 x 1000 mm – System pro E power
ABB PPMB2010 1STQ007556A0000 System pro E power blind mounting plate with a nominal height of 200 mm and width of 1000 mm, designed for compatible modular low-voltage electrical distribution switchboard assemblies.
£90.40
Why Choose the ABB PPMB2010 Blind Mounting Plate?
The ABB PPMB2010 (1STQ007556A0000) is a dedicated blind mounting plate designed for compatible ABB System pro E power low-voltage electrical distribution switchboards. Identified by the manufacturer's designation BLIND MOUNTING PLATE H=200MM W=1000MM, this enclosure accessory provides a practical mounting and panel assembly solution for electrical switchboard configurations requiring a nominal 200 mm height and 1000 mm width.
As part of the ABB System pro E power range, the PPMB2010 supports the modular construction of professional electrical distribution assemblies. Its blind, unperforated configuration provides a solid mounting surface without device-specific cutouts, making it suitable for compatible switchboard layouts where a dedicated mounting plate is required.
With its 200 mm high and 1000 mm wide configuration, the ABB 1STQ007556A0000 is particularly suitable for electrical panel builders, switchboard manufacturers and installation engineers seeking a manufacturer-specific accessory for modular low-voltage distribution systems. Its purpose-designed format supports organised internal equipment arrangements and straightforward integration with compatible System pro E power components.
Key Advantages
- Genuine ABB System pro E power mounting accessory for compatible modular low-voltage switchboards.
- 200 mm nominal height for the specified mounting arrangement.
- 1000 mm nominal width for compatible switchboard configurations.
- Blind mounting plate design provides a solid surface without predefined device cutouts.
- Supports organised installation and arrangement of compatible electrical equipment.
- Designed for integration with ABB System pro E power modular enclosure structures.
- Application-specific component helps simplify switchboard planning and assembly.
- Suitable for industrial, commercial and infrastructure electrical distribution installations.
Key Features
- ABB System pro E power product range.
- Manufacturer type: PPMB2010.
- ABB order code: 1STQ007556A0000.
- Product designation: BLIND MOUNTING PLATE H=200MM W=1000MM.
- Blind mounting plate for compatible low-voltage electrical distribution switchboards.
- 200 mm nominal mounting plate height.
- 1000 mm nominal mounting plate width.
- Solid panel configuration without predefined equipment openings.
- Designed for use within compatible ABB System pro E power switchboard assemblies.
- Supports modular electrical cabinet construction and equipment mounting arrangements.
- Suitable for professional electrical panel building and switchboard manufacturing.
- Dedicated accessory for compatible electrical distribution enclosure configurations.
Technical Specifications
- Manufacturer: ABB
- Product range: System pro E power
- Manufacturer type: PPMB2010
- ABB order code: 1STQ007556A0000
- Product designation: BLIND MOUNTING PLATE H=200MM W=1000MM
- Product type: Blind mounting plate
- Accessory category: Electrical switchboard mounting accessories
- Nominal height: 200 mm
- Nominal width: 1000 mm
- Plate configuration: Blind / solid
- Predefined device cutouts: None specified
- Mounting application: Internal mounting arrangement within compatible switchboard structures
- Compatible enclosure system: ABB System pro E power
- Equipment category: Low-voltage electrical distribution
- Application: Modular switchboard mounting plate installation and electrical enclosure assembly
Reliable Mounting Solutions for Modular Electrical Switchboards
The ABB PPMB2010 blind mounting plate is designed to support the construction of compatible System pro E power low-voltage electrical distribution switchboards. Mounting plates are important components in electrical panel assembly, providing designated surfaces for arranging equipment and completing modular switchboard configurations.
The PPMB2010 features a blind mounting plate configuration, meaning that it is not supplied with predefined device-specific openings. This makes it suitable for applications requiring a solid mounting surface rather than a plate manufactured for a particular circuit breaker, switch-disconnector or other front-mounted device. Any additional machining or equipment installation must remain within the manufacturer's permitted assembly requirements.
The ABB System pro E power range provides a modular platform for professional low-voltage electrical distribution. Its configurable enclosure structures support the installation of circuit protection equipment, switching devices, busbar systems, cable management components and associated mounting accessories. The PPMB2010 complements this modular architecture by providing a dedicated mounting plate for compatible switchboard arrangements.
With a nominal 200 mm height and 1000 mm width, the PPMB2010 is intended for the corresponding mounting configuration. Correct installation should follow ABB assembly instructions, including the selection of compatible supporting components, mounting hardware and equipment clearances. Where the mounting plate forms part of a complete low-voltage switchboard, the finished assembly should be designed and verified in accordance with applicable IEC 61439 requirements.
Typical Applications
- ABB System pro E power low-voltage electrical distribution switchboards.
- Internal mounting arrangements within compatible modular electrical enclosures.
- Industrial electrical distribution cabinets and switchgear assemblies.
- Commercial building main and sub-distribution boards.
- Mounting plate installations requiring a solid, blind panel configuration.
- Electrical switchrooms and plant room distribution equipment.
- Professional electrical panel building and modular switchboard manufacturing.
- Switchboard assembly projects requiring a 200 mm high and 1000 mm wide mounting plate.
Frequently Asked Questions
What is the ABB PPMB2010 1STQ007556A0000 used for?
The ABB PPMB2010 is a blind mounting plate designed for compatible ABB System pro E power low-voltage electrical distribution switchboards. It provides a solid mounting surface for suitable internal switchboard assembly arrangements.
What are the dimensions of the ABB PPMB2010 mounting plate?
The ABB PPMB2010 has a specified nominal height of 200 mm and width of 1000 mm, as identified in the manufacturer's product designation.
What does blind mounting plate mean?
A blind mounting plate is a solid plate without predefined device-specific cutouts. It is intended for compatible mounting arrangements where a dedicated plate with factory-made equipment openings is not required.
Which ABB enclosure system is compatible with the PPMB2010?
The ABB PPMB2010 (1STQ007556A0000) belongs to the System pro E power product range and is designed for compatible modular low-voltage electrical distribution switchboard structures.
Can the ABB PPMB2010 be used for mounting electrical equipment?
The PPMB2010 is designed as a mounting plate accessory for compatible System pro E power assemblies. The suitability of individual electrical components, mounting methods and any required modifications should be checked against ABB installation instructions and the mechanical requirements of the completed switchboard.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power mounting accessories support the professional construction of modular low-voltage electrical distribution switchboards. The ABB PPMB2010 blind mounting plate provides a dedicated 200 mm high and 1000 mm wide mounting solution for compatible enclosure configurations, helping electrical engineers and panel builders create organised, adaptable and application-specific power distribution assemblies.
