Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007533A0000 ABB PPMB1560 Blind Mounting Plate 150 mm × 600 mm – System Pro E Power
ABB PPMB1560 blind mounting plate measuring 150 mm high and 600 mm wide, designed to provide a mounting surface for suitable electrical components within compatible ABB System Pro E Power low-voltage switchboard assemblies.
£59.02
Why Choose the ABB PPMB1560 Blind Mounting Plate?
The ABB PPMB1560 is a purpose-designed blind mounting plate measuring 150 mm in height and 600 mm in width, developed for integration into compatible ABB System Pro E Power low-voltage switchboard assemblies. This genuine ABB mounting accessory provides a blank, unperforated mounting surface for suitable electrical equipment arrangements, supporting organised component installation and professional switchboard construction.
As part of the comprehensive ABB System Pro E Power range, the PPMB1560 supports the modular assembly of industrial and commercial electrical distribution systems. Its blind mounting plate configuration provides a practical foundation for positioning compatible electrical components within a switchboard, allowing panel builders to develop equipment layouts according to the requirements of the completed assembly.
With a specified plate height of 150 mm and plate width of 600 mm, the ABB PPMB1560 is intended for switchboard configurations requiring these dimensions. Its compact vertical profile makes it particularly relevant to suitable horizontal equipment mounting arrangements, while its blank surface provides flexibility for component positioning where permitted by the approved installation design.
Key Advantages
- Genuine ABB System Pro E Power accessory: Designed for integration into compatible low-voltage switchboard assemblies.
- 150 mm plate height: Provides a defined mounting area for suitable compact equipment arrangements.
- 600 mm plate width: Supports component positioning across a compatible modular switchboard section.
- Blind mounting plate design: Offers an unperforated mounting surface without predefined equipment cut-outs.
- Flexible equipment positioning: Allows suitable electrical components to be arranged according to the approved switchboard design.
- Organised component installation: Supports structured equipment layouts within compatible electrical distribution enclosures.
- Modular system integration: Complements ABB System Pro E Power structural and mounting accessories.
- Professional panel building: Suitable for electrical contractors, switchboard manufacturers and industrial panel builders.
Key Features
- Manufacturer: ABB.
- Product designation: PPMB1560.
- ABB order code: 1STQ007533A0000.
- Product range: System Pro E Power.
- Product type: Blind mounting plate.
- Nominal plate height: 150 mm.
- Nominal plate width: 600 mm.
- Plate configuration: Blind, unperforated mounting surface.
- Designed for mechanical integration into compatible modular low-voltage switchboard assemblies.
- Provides a mounting surface for suitable electrical components and installation accessories.
- Supports planned equipment positioning within electrical distribution enclosures.
- Intended for use with compatible ABB System Pro E Power supporting structures and mounting arrangements.
Reliable Equipment Mounting for Modular Low-Voltage Switchboards
Mounting plates are important mechanical accessories in electrical switchboard construction. They provide dedicated surfaces for positioning electrical components within an enclosure, helping panel builders develop organised equipment layouts and maintain appropriate installation clearances. Correct mounting plate selection contributes to the mechanical arrangement and serviceability of the completed switchboard.
The ABB PPMB1560 blind mounting plate provides a specifically dimensioned mounting surface for compatible ABB System Pro E Power configurations requiring a 150 mm high and 600 mm wide plate. Its relatively shallow vertical dimension makes it suitable for appropriately sized equipment arrangements where a larger mounting plate is unnecessary or incompatible with the available installation space.
Unlike equipment-specific mounting accessories incorporating predefined openings, the PPMB1560 is identified as a blind mounting plate. This provides a blank mounting surface for suitable installation arrangements. Any drilling, fixing or modification must be permitted by the applicable ABB instructions and must preserve the required mechanical strength, electrical clearances and safety of the finished switchboard.
ABB System Pro E Power is a modular low-voltage switchboard platform used in industrial and commercial electrical distribution applications. Its range of enclosure structures, internal panels, mounting plates and installation accessories enables panel builders to configure switchboards for different project requirements. The PPMB1560 complements this modular architecture by providing a dedicated mounting plate for suitable equipment arrangements.
The PPMB1560 is a mechanical mounting accessory rather than a complete electrical panel, protective device or external enclosure cover. Its suitability depends on the supporting structure, installed equipment, fixing arrangement and permissible mechanical loading. The electrical ratings, degree of protection and overall compliance of the finished switchboard are determined by the complete assembly rather than the mounting plate alone.
Typical Applications
- Low-voltage distribution switchboards: Providing a mounting surface within compatible ABB System Pro E Power assemblies.
- Industrial electrical installations: Supporting suitable electrical components within modular distribution equipment.
- Commercial power distribution: Facilitating organised equipment mounting in compatible switchboard enclosures.
- Electrical panel manufacturing: Providing a blank mounting surface for planned component layouts.
- Compact equipment arrangements: Supporting suitable installations requiring a 150 mm × 600 mm mounting plate.
- Terminal and accessory mounting: Providing a potential mounting location for appropriately sized components where permitted by the assembly design.
- Switchboard refurbishment: Replacing compatible mounting plates during approved maintenance or modification work.
- System Pro E Power projects: Integration with compatible ABB structural frames and internal mounting accessories.
Technical Specifications
| Product series | System Pro E Power |
|---|---|
| ABB order code | 1STQ007533A0000 |
| Product type | Blind mounting plate |
| Accessory category | Switchboard mounting plates and installation accessories |
| Plate height | 150 mm |
| Plate width | 600 mm |
| Nominal dimensions (H × W) | 150 mm × 600 mm |
| Plate configuration | Blind mounting plate |
| Primary application | Mechanical mounting of suitable electrical components |
| System compatibility | ABB System Pro E Power, subject to assembly configuration |
| Installation arrangement | Mounting within compatible switchboard structures |
| Manufacturer part number | 1STQ007533A0000 |
Frequently Asked Questions
What is the ABB PPMB1560 used for?
The ABB PPMB1560 is a blind mounting plate designed for compatible ABB System Pro E Power low-voltage switchboard assemblies. It provides a blank mounting surface for suitable electrical components within an approved switchboard configuration.
What are the dimensions of the ABB PPMB1560 mounting plate?
The PPMB1560 measures 150 mm in height and 600 mm in width. These dimensions should be matched to the intended ABB System Pro E Power mounting arrangement.
What is the difference between a blind mounting plate and a blind flat panel?
A blind mounting plate provides a surface intended for mounting suitable electrical equipment within a switchboard, whereas a blind flat panel is primarily used to cover compatible openings or unused panel spaces. The PPMB1560 is specifically identified as a mounting plate.
Can electrical components be installed on the ABB PPMB1560?
The PPMB1560 is intended to provide a mounting surface for suitable electrical components. The equipment dimensions, fixing method, required electrical clearances and permissible mechanical loading must be checked against the applicable ABB System Pro E Power instructions and the completed switchboard design.
Is the ABB PPMB1560 compatible with every System Pro E Power switchboard?
The PPMB1560 belongs to the ABB System Pro E Power accessory range, but compatibility depends on the enclosure dimensions, supporting structure and mounting arrangement. The relevant ABB assembly documentation should be checked before selection and installation.
Trusted ABB Components for Professional Switchboard Construction
ABB System Pro E Power mounting accessories, including the PPMB1560 blind mounting plate, support professional electrical panel builders and switchboard manufacturers in creating organised, modular and carefully configured low-voltage electrical distribution assemblies.
