Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007511A0000 ABB PPFB2012 Blind Flat Panel 200mm x 1250mm
ABB PPFB2012 1STQ007511A0000 is a blind flat panel accessory for compatible System Pro E Power low-voltage switchgear assemblies, specified for a nominal height of 200 mm and width of 1250 mm.
£66.52
Why Choose the ABB PPFB2012 Blind Flat Panel – 200 mm x 1250 mm?
The ABB PPFB2012 Blind Flat Panel (1STQ007511A0000) is a dedicated switchgear panel accessory for compatible ABB System Pro E Power low-voltage electrical distribution assemblies. Identified by the manufacturer's description BLIND FLAT PANEL H=200MM W=1250MM, this product is specified as a blind flat panel with a nominal height of 200 mm and width of 1250 mm.
Designed for use within the ABB System Pro E Power range, the PPFB2012 provides a manufacturer-identified covering component for designated switchboard panel sections. Its blind configuration makes it suitable for compatible arrangements requiring a closed panel area rather than a component specifically designed with openings for electrical devices, operating handles or ventilation.
The flat panel designation is an important part of the manufacturer's specification. In modular switchgear construction, panel profile, nominal dimensions and fixing arrangements must correspond to the intended assembly design. The ABB PPFB2012 should therefore be selected according to the relevant System Pro E Power panel layout and installation drawings.
With a nominal height of 200 mm and width of 1250 mm, the ABB PPFB2012 is intended for a particular panel configuration within the manufacturer's modular switchgear system. These dimensions help distinguish it from other blind panel sizes and support accurate component selection during switchboard design, manufacture and maintenance.
Featuring product reference PPFB2012 and ABB order code 1STQ007511A0000, this accessory offers precise manufacturer identification for professional panel builders, switchgear manufacturers, electrical contractors and maintenance engineers. It is a panel component rather than a complete enclosure, and its suitability depends on the specified ABB System Pro E Power assembly.
Key Advantages
- Purpose-designed ABB System Pro E Power blind flat panel accessory.
- Manufacturer-specified nominal height of 200 mm.
- Designed for a nominal panel width of 1250 mm.
- Blind covering configuration for compatible switchgear panel sections.
- Flat panel design for manufacturer-specified mounting arrangements.
- Supports the completion of designated electrical switchboard covering areas.
- Helps panel builders select the correct panel size for the intended assembly.
- Provides a manufacturer-identified component for consistent switchgear construction.
- Suitable for professional low-voltage electrical distribution panel manufacturing.
- Useful for approved switchboard refurbishment and replacement projects.
- Clearly identified by ABB order code 1STQ007511A0000.
- Part of the established ABB System Pro E Power switchgear accessory range.
Key Features
- Manufacturer: ABB.
- Product reference: PPFB2012.
- ABB order code: 1STQ007511A0000.
- Manufacturer description: BLIND FLAT PANEL H=200MM W=1250MM.
- Product group: System Pro E Power.
- Component type: Blind flat panel.
- Panel configuration: Blind.
- Panel profile designation: Flat.
- Nominal height: 200 mm.
- Nominal width: 1250 mm.
- Intended for compatible ABB System Pro E Power switchgear assemblies.
- Supports manufacturer-specified panel covering arrangements.
- Suitable for original switchboard construction and approved replacement applications.
- Requires confirmation of the associated panel mounting system and fixing accessories.
- Installation should follow the applicable ABB technical drawings and assembly instructions.
Technical Specifications
- Manufacturer: ABB
- Product group: System Pro E Power
- Product reference: PPFB2012
- ABB order code: 1STQ007511A0000
- Product name: ABB PPFB2012 Blind Flat Panel – 200 mm x 1250 mm
- Manufacturer description: BLIND FLAT PANEL H=200MM W=1250MM
- Product type: Blind flat panel
- Accessory category: Low-voltage switchgear panel and covering accessories
- Product family: System Pro E Power
- Panel configuration: Blind
- Panel profile: Flat
- Nominal height: 200 mm
- Nominal width: 1250 mm
- Primary function: Covering a designated panel section within a compatible switchgear assembly
- Associated equipment: ABB System Pro E Power low-voltage switchgear assemblies
- Equipment compatibility: System Pro E Power configurations specifying PPFB2012
- Mounting arrangement: According to the applicable ABB panel assembly instructions
- Product classification: Switchgear blind panel accessory
- Application: Low-voltage electrical distribution switchboard construction, maintenance and refurbishment
Blind Flat Panels in ABB System Pro E Power Switchgear Assemblies
The ABB System Pro E Power range provides modular solutions for constructing low-voltage electrical distribution switchboards. These assemblies may incorporate structural frames, doors, circuit breakers, busbar systems, mounting components, internal separation arrangements and covering panels selected according to the requirements of the completed electrical installation.
Blind flat panels are used in compatible switchgear configurations to cover designated areas where no equipment cut-out or operating-device opening is required. Depending on the manufacturer's assembly design, these panels can help complete the intended switchboard layout and provide a covering interface between accessible areas and the equipment installed behind them.
The ABB PPFB2012 is specifically described as a blind flat panel. This distinguishes it from panels intended to accommodate instruments, operating handles, ventilation openings or other dedicated equipment interfaces. The exact construction and approved mounting position should be confirmed using ABB's System Pro E Power documentation.
The manufacturer's H=200MM designation identifies a nominal panel height of 200 mm. This dimension is relevant when configuring switchboard panel sections of different heights. Correct selection helps ensure that the chosen component corresponds to the intended panel arrangement and mounting geometry.
The designation W=1250MM identifies a nominal panel width of 1250 mm. This is an important selection parameter for wider switchboard configurations. The panel must be matched to the specified ABB assembly rather than selected solely on the basis of a similar-looking opening.
Although the PPFB2012 is described as a 200 mm x 1250 mm panel, these values are the manufacturer's stated dimensional parameters. They should not automatically be interpreted as the exact external measurements of the finished component, including any edges, fixing features or manufacturing tolerances.
The flat profile designation also matters when selecting switchgear accessories. Different panel types may have different mounting interfaces, surface profiles or associated supports. A flat panel should therefore be used only where the corresponding manufacturer-specified arrangement calls for that configuration.
Correct panel installation is important for the mechanical construction of the completed switchboard. The ABB PPFB2012 should be installed using the appropriate manufacturer-specified mounting components, supports and fasteners. Its positioning must also be compatible with any equipment, connections or separation arrangements located behind the panel.
The supplied manufacturer description does not confirm the exact material, sheet thickness, colour, surface finish, fastening method or package contents. These characteristics should be verified against the relevant ABB catalogue, product datasheet or assembly drawings before purchase or installation.
The ABB PPFB2012 does not independently establish a particular ingress protection rating, mechanical impact rating, electrical insulation classification or form of internal separation. Such characteristics depend on the complete switchgear assembly, its associated components and the manufacturer's verified construction.
Low-voltage switchgear and controlgear assemblies may be designed and verified in accordance with BS EN IEC 61439. Where an enclosure has a declared ingress protection classification, the relevant requirements of BS EN 60529 must also be considered. The suitability of the blind panel must therefore be assessed as part of the complete switchboard design.
For new installations or replacement work, confirm the PPFB2012 product reference, ABB order code 1STQ007511A0000, blind flat panel designation, nominal 200 mm height and 1250 mm width against the relevant System Pro E Power panel layout drawings and bill of materials.
Typical Applications
- ABB System Pro E Power low-voltage switchgear assemblies.
- Compatible blind panel covering arrangements.
- Panel sections requiring a nominal height of 200 mm.
- Switchgear configurations specifying a nominal panel width of 1250 mm.
- Designated flat panel mounting positions.
- Industrial electrical distribution switchboards.
- Commercial building electrical distribution panels.
- Main low-voltage distribution assemblies.
- Sub-distribution switchgear construction.
- OEM electrical panel manufacturing.
- System Pro E Power switchgear refurbishment projects.
- Manufacturer-approved blind panel replacement and maintenance.
Frequently Asked Questions
What is the ABB PPFB2012 1STQ007511A0000 used for?
The ABB PPFB2012 is a blind flat panel for compatible ABB System Pro E Power low-voltage switchgear assemblies. It is specified for a nominal panel height of 200 mm and width of 1250 mm.
What is the ABB order code for the PPFB2012 blind flat panel?
The ABB order code is 1STQ007511A0000. The product reference is PPFB2012, and it belongs to the ABB System Pro E Power product group.
What does Blind Flat Panel mean in the ABB PPFB2012 description?
Blind Flat Panel identifies a flat covering component without a specifically designated equipment cut-out or ventilation opening. The exact construction and intended mounting position should be confirmed using ABB's technical documentation.
What does H=200MM mean for the ABB PPFB2012?
H=200MM identifies a nominal panel height of 200 mm. This dimension is used to select the appropriate component for the intended System Pro E Power panel configuration.
What does W=1250MM mean in the ABB PPFB2012 specification?
W=1250MM identifies a nominal panel width of 1250 mm. The exact external dimensions and mounting-hole positions should be checked against the applicable ABB technical drawings.
Which ABB switchgear systems are compatible with the PPFB2012?
The PPFB2012 belongs to the ABB System Pro E Power range. It should be used with switchgear configurations that specifically require this product reference and match the designated blind flat panel arrangement.
Can the ABB PPFB2012 be used to cover an unused switchgear panel section?
The ABB PPFB2012 is a blind covering panel and may be suitable for a designated unused panel section where the System Pro E Power assembly documentation specifies this component. Compatibility, mounting and electrical safety requirements must be confirmed before installation.
Does the ABB PPFB2012 provide a specific IP rating?
No specific ingress protection rating is stated in the supplied ABB PPFB2012 description. The panel does not independently establish an IP classification. The protection level depends on the complete enclosure construction and correct installation of all associated components.
What material is the ABB PPFB2012 blind flat panel made from?
The supplied manufacturer description does not establish the exact material, thickness, surface finish or colour of the ABB PPFB2012. These details should be confirmed using ABB's product documentation or technical drawings.
Does the ABB PPFB2012 include mounting screws or fixing accessories?
The manufacturer's description does not confirm whether fasteners, supports or other mounting accessories are included. Check the applicable ABB supply documentation and System Pro E Power parts list for the exact contents and any separately required components.
What should be checked before ordering the ABB PPFB2012?
Confirm the ABB order code 1STQ007511A0000, product reference PPFB2012, blind flat panel designation, nominal 200 mm height and 1250 mm width. Verify the compatible switchgear layout, mounting arrangement and any required fixing accessories using ABB's System Pro E Power documentation.
Designed for Professional ABB System Pro E Power Switchgear Installations
ABB System Pro E Power panel accessories support the construction, maintenance and refurbishment of professionally engineered low-voltage electrical distribution switchboards. The ABB PPFB2012 Blind Flat Panel provides a manufacturer-identified covering component for compatible 200 mm-high, 1250 mm-wide panel configurations, helping panel builders and maintenance engineers select the appropriate accessory for their specified switchgear assembly.
