Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007508B0000 ABB System pro E Power 2 Galvanised Sheet Crosspieces CC D=1250 mm
ABB 1STQ007508B0000 System pro E Power set of two galvanised sheet crosspieces with manufacturer configuration designation CC D=1250 mm, intended for compatible low-voltage electrical switchboard enclosure assemblies.
£101.28
Why Choose the ABB System pro E Power Galvanised Sheet Crosspieces CC D=1250 mm?
The ABB 1STQ007508B0000 is a manufacturer-designated set of 2 galvanised sheet crosspieces for compatible ABB System pro E Power low-voltage electrical switchboard assemblies. Identified by ABB as 2 GALVANIZ SHEET CROSSPIECES CC D=1250MM, this accessory set is intended for selected modular enclosure arrangements requiring galvanised sheet crosspieces with a CC configuration designation and a specified D=1250 mm dimension.
Crosspieces are used in electrical enclosure construction as structural and installation-related components within compatible cabinet arrangements. The ABB 1STQ007508B0000 set provides two manufacturer-designated galvanised sheet components for applications where this particular crosspiece specification is required. The galvanised sheet construction offers a zinc-coated steel-sheet material format commonly selected for its corrosion-resistance characteristics in suitable indoor electrical enclosure applications, although the exact coating specification and environmental suitability must be confirmed from ABB documentation.
As part of the ABB System pro E Power product group, these crosspieces support coordinated modular switchboard construction using correctly specified enclosure accessories. The quantity of two, CC designation and D=1250 mm reference are important selection details for electrical panel builders. The ABB order code 1STQ007508B0000 provides an unambiguous product reference for procurement, assembly documentation and replacement of matching components.
Key Advantages
- Manufacturer-designated ABB System pro E Power crosspiece set for compatible switchboard assemblies.
- Supplied as a specified set of 2 galvanised sheet crosspieces.
- Galvanised sheet construction provides a corrosion-resistant material format for appropriate enclosure applications.
- CC configuration designation supports identification of the intended ABB assembly arrangement.
- D=1250 mm manufacturer designation helps distinguish the set from crosspieces specified for other dimensions.
- Supports coordinated construction of compatible modular electrical distribution cabinets.
- Provides manufacturer-designated components for selected internal enclosure arrangements.
- Useful for professional electrical panel building and compatible switchboard refurbishment projects.
- Helps reduce component-selection errors when the correct ABB order code is specified.
- Clearly identified by ABB order code 1STQ007508B0000 for purchasing and replacement.
Key Features
- ABB System pro E Power electrical enclosure accessory.
- ABB order code 1STQ007508B0000.
- Two crosspieces specified in the manufacturer designation.
- Galvanised sheet material construction.
- CC manufacturer configuration reference.
- D=1250 mm dimensional designation.
- Crosspiece component format for compatible electrical switchboard assemblies.
- Intended for selected modular enclosure configurations.
- Suitable for professional low-voltage switchboard construction where specified.
- Designed for integration with compatible ABB System pro E Power components.
- Useful for coordinated enclosure assembly and component replacement.
- Manufacturer-defined quantity and configuration for accurate specification.
- Dedicated ABB product reference for procurement and technical documentation.
Galvanised Crosspieces for Compatible Modular Switchboard Construction
The ABB 1STQ007508B0000 galvanised sheet crosspieces are intended for selected System pro E Power enclosure arrangements requiring the manufacturer-designated CC D=1250 mm configuration. The supplied set contains two crosspieces, allowing panel builders to specify the required quantity using a single ABB order code. These components should be positioned and installed only as shown in the relevant ABB assembly instructions for the selected switchboard configuration.
The designation D=1250 mm must be interpreted according to ABB's dimensional drawings. Although it identifies a 1250 mm dimension associated with the intended arrangement, the abbreviated manufacturer description does not establish whether this represents an overall crosspiece length, a nominal enclosure depth or another assembly-specific measurement. Likewise, the exact meaning of CC, fixing-hole positions, material thickness and supplied installation hardware are not established by the provided specification.
Before installation, verify the selected enclosure configuration, mounting positions, required fasteners and any relevant mechanical or electrical assembly requirements. Galvanised sheet construction does not independently establish a structural load capacity, protective-earth continuity, ingress protection rating or suitability for a particular environment. These characteristics must be assessed using the applicable ABB documentation and the completed switchboard design.
Typical Applications
- ABB System pro E Power modular switchboard assemblies.
- Compatible electrical enclosure crosspiece installations.
- Switchboard arrangements specifying CC D=1250 mm components.
- Industrial low-voltage electrical distribution cabinets.
- Commercial electrical power distribution enclosures.
- Internal structural arrangements in compatible modular switchboards.
- Professional electrical panel-building projects.
- Manufacturer-specified enclosure component assembly.
- Compatible switchboard modification and refurbishment work.
- Replacement of matching ABB galvanised sheet crosspieces.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| Series | System pro E Power |
| ABB order code | 1STQ007508B0000 |
| SKU / MPN | 1STQ007508B0000 |
| Manufacturer designation | 2 GALVANIZ SHEET CROSSPIECES CC D=1250MM |
| Product type | Galvanised sheet crosspieces |
| Accessory category | Electrical switchboard structural and enclosure accessories |
| Specified quantity | 2 crosspieces |
| Material designation | Galvanised sheet |
| Surface treatment designation | Galvanised |
| Configuration reference | CC |
| Manufacturer dimensional designation | D=1250 mm |
| Designated dimension | 1250 mm |
| Primary function | Crosspiece components for compatible switchboard enclosure arrangements |
| Installation application | Modular electrical switchboard assembly |
| Compatible product range | ABB System pro E Power |
| Typical equipment | Low-voltage electrical distribution switchboards |
| Supply format | Set of 2 galvanised sheet crosspieces |
Frequently Asked Questions
What is the ABB 1STQ007508B0000 crosspiece set used for?
The ABB 1STQ007508B0000 is a set of two galvanised sheet crosspieces intended for compatible ABB System pro E Power electrical switchboard enclosure arrangements. The manufacturer identifies the required configuration as CC D=1250 mm.
How many crosspieces are included in ABB 1STQ007508B0000?
The manufacturer designation specifies 2 galvanised sheet crosspieces. The exact fixing hardware or additional installation accessories, if any, are not identified in the supplied abbreviated specification and should be checked against ABB's product documentation.
What material are the ABB 1STQ007508B0000 crosspieces made from?
ABB identifies these components as galvanised sheet crosspieces. Galvanised sheet is a zinc-coated steel-sheet material format used for corrosion resistance, but the precise sheet thickness, coating specification and environmental performance are not stated in the supplied product designation.
What does CC D=1250MM mean for these ABB crosspieces?
CC D=1250MM is the manufacturer's configuration and dimensional designation. It identifies a 1250 mm dimension associated with the intended assembly, but the abbreviated description does not establish the exact dimensional reference or define the CC abbreviation. Consult ABB's technical drawings before selecting or installing the components.
Are the ABB 1STQ007508B0000 crosspieces compatible with every System pro E Power enclosure?
Not necessarily. The crosspieces belong to the ABB System pro E Power product group, but their suitability depends on the specific enclosure arrangement and the required CC D=1250 mm configuration. Compatibility should be verified using the relevant ABB assembly documentation.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure accessories support coordinated construction of professional low-voltage electrical distribution switchboards. The ABB 1STQ007508B0000 set provides two galvanised sheet crosspieces with the manufacturer designation CC D=1250 mm for compatible modular enclosure configurations, helping panel builders identify the correct components for their specified assemblies.
