Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007492A0000 ABB PPFB2080 Blind Flat Panel 200 mm × 800 mm – System Pro E Power
ABB PPFB2080 blind flat panel measuring 200 mm high and 800 mm wide, designed to cover compatible openings within ABB System Pro E Power low-voltage switchboard assemblies.
£37.93
Why Choose the ABB PPFB2080 Blind Flat Panel?
The ABB PPFB2080 is a purpose-designed blind flat panel measuring 200 mm in height and 800 mm in width, developed for integration into compatible ABB System Pro E Power low-voltage switchboard assemblies. This enclosure accessory provides a flat, unperforated covering for suitable switchboard openings, helping electrical panel builders create organised, secure and professionally finished electrical distribution installations.
As part of the comprehensive ABB System Pro E Power range, the PPFB2080 supports the modular construction of industrial and commercial electrical switchboards. Its blind panel configuration is intended to close compatible unused panel spaces, providing a continuous covering surface and helping maintain the intended physical separation between internal electrical components and accessible areas when correctly installed.
With a specified panel height of 200 mm and panel width of 800 mm, the ABB PPFB2080 is suitable for switchboard configurations requiring this particular panel size. Its flat construction provides a practical finishing solution for compatible modular enclosures, supporting consistent panel alignment, straightforward accessory selection and professional switchboard assembly.
Key Advantages
- Genuine ABB System Pro E Power accessory designed for compatible low-voltage switchboard assemblies.
- 200 mm panel height for covering suitable switchboard openings and unused equipment spaces.
- 800 mm panel width for integration into compatible modular enclosure configurations.
- Blind flat panel design provides an unperforated covering surface without equipment cut-outs.
- Helps close unused panel spaces and supports a neat, consistent switchboard appearance.
- Contributes to the physical separation of internal electrical equipment from accessible areas when correctly installed.
- Supports flexible modular construction within the ABB System Pro E Power range.
- Suitable for professional electrical panel builders, switchboard manufacturers and industrial installers.
Key Features
- ABB System Pro E Power switchboard accessory.
- Product designation: PPFB2080.
- ABB order code: 1STQ007492A0000.
- Product type: Blind flat panel.
- Nominal panel height: 200 mm.
- Nominal panel width: 800 mm.
- Panel configuration: Flat, blind covering panel.
- Designed for covering compatible openings within modular low-voltage switchboard assemblies.
- Supports consistent panel positioning and enclosure finishing.
- Intended for integration with compatible ABB System Pro E Power mounting structures and accessories.
Reliable Panel Covering for Low-Voltage Switchboard Assemblies
Blind panels are important mechanical components in modular electrical switchboard construction. They are used to cover suitable openings and unused equipment spaces, helping create a consistent enclosure surface and supporting the intended separation of internal electrical components from accessible areas. Correctly selected and installed panels contribute to the overall mechanical arrangement, orderly appearance and appropriate enclosure configuration of a completed switchboard.
The ABB PPFB2080 blind flat panel provides a dedicated covering solution for compatible ABB System Pro E Power arrangements requiring a 200 mm high and 800 mm wide panel. Its unperforated flat design makes it suitable for applications where a blank covering section is required instead of a panel containing openings for electrical devices, indicators or operating mechanisms.
ABB System Pro E Power is a modular low-voltage switchboard platform designed for electrical distribution applications. The range includes enclosure structures, doors, panels, mounting frames and installation accessories that enable panel builders to configure switchboards for different project requirements. The PPFB2080 complements this system by providing a correctly sized blind panel for suitable enclosure arrangements.
The PPFB2080 is a mechanical enclosure accessory rather than a complete electrical panel or protective device. The degree of protection, internal separation and electrical safety performance of the finished switchboard depend on the complete enclosure configuration, associated components and correct installation. The panel should be fitted according to the applicable ABB System Pro E Power assembly documentation.
Typical Applications
- ABB System Pro E Power low-voltage switchboard construction.
- Covering compatible unused openings in electrical distribution panels.
- Industrial electrical switchboard assembly and finishing.
- Commercial power distribution enclosure installations.
- Modular switchboard panel arrangements requiring a flat blind cover.
- Electrical panel manufacturing and switchboard fabrication projects.
- Maintenance and replacement of compatible enclosure covering panels.
- Switchboard refurbishment and modification projects requiring a 200 mm × 800 mm blind panel.
Technical Specifications
| Series | System Pro E Power |
|---|---|
| ABB order code | 1STQ007492A0000 |
| Product type | Blind flat panel |
| Accessory category | Switchboard enclosure panels and covers |
| Panel height | 200 mm |
| Panel width | 800 mm |
| Nominal panel dimensions (H × W) | 200 mm × 800 mm |
| Panel configuration | Blind, flat |
| Application | Low-voltage switchboard panel covering |
| System compatibility | ABB System Pro E Power, subject to configuration |
| Installation type | Mechanical mounting within compatible switchboard structures |
| Manufacturer part number | 1STQ007492A0000 |
Frequently Asked Questions
What is the ABB PPFB2080 used for?
The ABB PPFB2080 is a blind flat panel designed to cover compatible openings within ABB System Pro E Power low-voltage switchboard assemblies. It provides a blank covering surface for suitable enclosure configurations and helps achieve a consistent switchboard finish.
What are the dimensions of the ABB PPFB2080 blind flat panel?
The PPFB2080 measures 200 mm in height and 800 mm in width. These dimensions should be matched to the intended ABB System Pro E Power switchboard configuration.
What is the difference between a blind flat panel and a slotted panel?
A blind flat panel provides an unperforated covering surface, while a slotted panel incorporates openings intended for compatible equipment arrangements. The PPFB2080 is designed for applications requiring a flat, blank covering panel without device openings.
Does the ABB PPFB2080 provide an IP protection rating?
The PPFB2080 is identified as a blind flat panel, but an individual IP protection rating is not established by the supplied product specification. The protection rating of the completed switchboard depends on the overall enclosure design, associated components and correct installation.
Is the ABB PPFB2080 compatible with every System Pro E Power switchboard?
The PPFB2080 belongs to the ABB System Pro E Power accessory range, but compatibility depends on the switchboard dimensions, mounting arrangement and enclosure configuration. The applicable ABB assembly instructions should be checked before installation.
Trusted ABB Components for Professional Switchboard Construction
ABB System Pro E Power enclosure accessories, including the PPFB2080 blind flat panel, support professional electrical panel builders and switchboard manufacturers in creating organised, modular and consistently finished low-voltage electrical distribution assemblies.
