Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007489A0000 ABB PPFB5080 Blind Flat Panel 50mm x 800mm
ABB PPFB5080 1STQ007489A0000 is a blind flat panel accessory for compatible System Pro E Power low-voltage switchgear assemblies, specified for a nominal height of 50 mm and width of 800 mm.
£23.14
Why Choose the ABB PPFB5080 Blind Flat Panel – 50 mm x 800 mm?
The ABB PPFB5080 Blind Flat Panel (1STQ007489A0000) is a dedicated enclosure panel accessory for compatible ABB System Pro E Power low-voltage switchgear assemblies. Identified by the manufacturer's description BLIND FLAT PANEL H=50MM W=800MM, this product is specified as a blind flat panel with a nominal height of 50 mm and width of 800 mm.
Designed for use within the ABB System Pro E Power range, the PPFB5080 provides a manufacturer-identified solution for completing designated panel areas in modular electrical distribution switchboards. Its blind configuration makes it relevant to enclosure arrangements requiring a closed panel section rather than an accessory specifically designed with operating-device cut-outs or ventilation openings.
The flat panel design is an important part of the manufacturer's specification. In compatible switchgear assemblies, blind flat panels can be used to complete designated covering arrangements and provide a consistent enclosure layout. The exact mounting position, fixing method and relationship to adjacent panels must be established from the applicable ABB assembly drawings.
With a nominal height of 50 mm and width of 800 mm, the ABB PPFB5080 is identified for a particular panel size configuration. These dimensions help distinguish it from other System Pro E Power blind panels and should be checked against the relevant switchboard layout before ordering.
Featuring product reference PPFB5080 and ABB order code 1STQ007489A0000, this accessory supports accurate product identification for professional panel builders, switchgear manufacturers, electrical contractors and maintenance engineers. It is a panel component rather than a complete enclosure, and its compatibility depends on the specified System Pro E Power assembly.
Key Advantages
- Purpose-designed ABB System Pro E Power blind flat panel accessory.
- Manufacturer-specified 50 mm nominal panel height.
- Designed for a nominal width of 800 mm.
- Blind covering arrangement for compatible switchgear panel sections.
- Flat panel configuration suited to manufacturer-specified enclosure layouts.
- Supports the completion of designated internal or external panel arrangements, where specified by ABB.
- Helps panel builders select the correct covering component for a defined panel opening.
- Provides a manufacturer-identified component for consistent switchboard assembly.
- Suitable for professional low-voltage electrical distribution panel construction.
- Useful for approved switchgear refurbishment and replacement applications.
- Clearly identified by ABB order code 1STQ007489A0000.
- Part of the established ABB System Pro E Power switchgear accessory range.
Key Features
- Manufacturer: ABB.
- Product reference: PPFB5080.
- ABB order code: 1STQ007489A0000.
- Manufacturer description: BLIND FLAT PANEL H=50MM W=800MM.
- Product group: System Pro E Power.
- Component type: Blind flat panel.
- Panel configuration: Blind.
- Panel profile designation: Flat.
- Nominal height: 50 mm.
- Nominal width: 800 mm.
- Intended for compatible System Pro E Power switchgear assemblies.
- Supports manufacturer-specified panel covering arrangements.
- Suitable for original switchboard construction and approved replacement applications.
- Requires confirmation of the associated panel mounting system.
- Installation should follow the applicable ABB technical drawings and assembly instructions.
Technical Specifications
- Manufacturer: ABB
- Product group: System Pro E Power
- Product reference: PPFB5080
- ABB order code: 1STQ007489A0000
- Product name: ABB PPFB5080 Blind Flat Panel – 50 mm x 800 mm
- Manufacturer description: BLIND FLAT PANEL H=50MM W=800MM
- Product type: Blind flat panel
- Accessory category: Low-voltage switchgear panel and covering accessories
- Product family: System Pro E Power
- Panel configuration: Blind
- Panel profile: Flat
- Nominal height: 50 mm
- Nominal width: 800 mm
- Primary function: Covering a designated panel section within a compatible switchgear assembly
- Associated equipment: ABB System Pro E Power low-voltage switchgear assemblies
- Equipment compatibility: System Pro E Power configurations specifying PPFB5080
- Mounting arrangement: According to the applicable ABB panel assembly instructions
- Product classification: Switchgear blind panel accessory
- Application: Low-voltage electrical distribution switchboard construction, maintenance and refurbishment
Blind Flat Panels in ABB System Pro E Power Switchgear Assemblies
The ABB System Pro E Power range provides modular solutions for constructing low-voltage electrical distribution switchboards. These assemblies may incorporate structural frames, doors, internal mounting systems, busbar arrangements, circuit breakers, distribution equipment and panel accessories selected according to the requirements of the completed installation.
Blind panels are commonly used in electrical switchgear construction to cover designated areas where no equipment access opening or operating-device cut-out is required. Depending on the assembly design, such panels can help complete a switchboard's covering arrangement and maintain the intended separation between accessible areas and internal equipment.
The ABB PPFB5080 is specifically identified as a blind flat panel. This description distinguishes it from panels incorporating openings for instruments, operating handles, ventilation or other equipment. However, the exact construction and intended mounting location should be verified using ABB's technical documentation.
The manufacturer's H=50MM designation identifies a nominal panel height of 50 mm. This is an important selection parameter when configuring panel sections of different heights. A correctly sized blind panel must correspond to the intended switchboard layout and associated fixing arrangement.
The designation W=800MM identifies a nominal panel width of 800 mm. This width must be considered alongside the panel height and the relevant System Pro E Power configuration. A blind panel intended for an 800 mm-wide arrangement should not automatically be substituted for a component designed for another width.
Although the PPFB5080 is described as a 50 mm x 800 mm panel, these are the manufacturer's stated dimensional parameters. They should not automatically be interpreted as the exact external measurements of the finished component, including any folded edges, mounting features or manufacturing tolerances.
The flat panel designation is also relevant to component selection. Different switchgear panel configurations may use distinct profiles, mounting methods or fixing interfaces. Selecting a flat panel where the assembly specifies that arrangement helps maintain consistency with the intended manufacturer design.
Correct panel installation is important for the mechanical construction of the completed switchboard. The PPFB5080 should be installed using the appropriate manufacturer-specified supports, fasteners and mounting positions. Any requirements for removal, access or inspection must be considered as part of the complete assembly design.
The supplied manufacturer description does not confirm the exact material, sheet thickness, surface finish, colour, fixing hardware or packaging contents. These characteristics should be checked against the applicable ABB catalogue, product datasheet or assembly documentation rather than assumed.
The ABB PPFB5080 does not independently establish a particular ingress protection rating, mechanical impact rating, form of internal separation or electrical safety classification. These characteristics depend on the complete switchgear assembly, the positioning of the panel and the correct installation of all associated components.
Low-voltage switchgear and controlgear assemblies may be designed and verified in accordance with BS EN IEC 61439. Where relevant, the complete enclosure's ingress protection classification is considered under BS EN 60529. The suitability of a blind panel must therefore be assessed as part of the manufacturer's specified and verified switchgear arrangement.
For new installations or replacement work, confirm the PPFB5080 product reference, ABB order code 1STQ007489A0000, blind flat panel designation, nominal 50 mm height and 800 mm width against the relevant System Pro E Power parts list and panel layout drawings.
Typical Applications
- ABB System Pro E Power low-voltage switchgear assemblies.
- Compatible blind panel covering arrangements.
- Panel sections requiring a nominal height of 50 mm.
- Switchgear panel configurations with a nominal width of 800 mm.
- Designated flat panel mounting positions.
- Industrial electrical distribution switchboards.
- Commercial building electrical distribution panels.
- Main low-voltage distribution assemblies.
- Sub-distribution switchgear construction.
- OEM electrical panel manufacturing.
- System Pro E Power switchgear refurbishment projects.
- Manufacturer-approved blind panel replacement and maintenance.
Frequently Asked Questions
What is the ABB PPFB5080 1STQ007489A0000 used for?
The ABB PPFB5080 is a blind flat panel for compatible ABB System Pro E Power low-voltage switchgear assemblies. It is specified for a nominal panel height of 50 mm and width of 800 mm.
What is the ABB order code for the PPFB5080 blind flat panel?
The ABB order code is 1STQ007489A0000. The product reference is PPFB5080, and it belongs to the ABB System Pro E Power product group.
What does Blind Flat Panel mean in the ABB PPFB5080 description?
Blind Flat Panel identifies a flat covering component without a specifically designated equipment cut-out or ventilation opening. The exact construction and intended installation position should be confirmed using ABB's technical documentation.
What does H=50MM mean for the ABB PPFB5080?
H=50MM identifies a nominal panel height of 50 mm. This dimension is used to select the appropriate component for the intended System Pro E Power panel configuration.
What does W=800MM mean in the ABB PPFB5080 specification?
W=800MM identifies a nominal panel width of 800 mm. The exact external dimensions and mounting-hole positions should be checked against the applicable ABB technical drawings.
Which ABB switchgear systems are compatible with the PPFB5080?
The PPFB5080 belongs to the ABB System Pro E Power range. It should be used with switchgear configurations that specifically require this product reference and match the designated blind flat panel arrangement.
Can the ABB PPFB5080 be used to cover an unused switchgear panel section?
The ABB PPFB5080 is a blind covering panel and may be suitable for a designated unused panel section where the System Pro E Power assembly documentation specifies this component. Compatibility, mounting and electrical safety requirements must be confirmed before installation.
Does the ABB PPFB5080 provide a specific IP rating?
No specific ingress protection rating is stated in the supplied ABB PPFB5080 description. The panel does not independently establish an IP classification. The protection level depends on the complete enclosure construction and correct installation of all associated components.
What material is the ABB PPFB5080 blind flat panel made from?
The supplied manufacturer description does not establish the exact material, thickness, surface finish or colour of the ABB PPFB5080. These details should be confirmed using ABB's product documentation or technical drawings.
Does the ABB PPFB5080 include mounting screws or fixing accessories?
The manufacturer's description does not confirm whether fasteners, supports or other mounting accessories are included. Check the applicable ABB supply documentation and System Pro E Power parts list for the exact contents and any separately required components.
What should be checked before ordering the ABB PPFB5080?
Confirm the ABB order code 1STQ007489A0000, product reference PPFB5080, blind flat panel designation, nominal 50 mm height and 800 mm width. Verify the compatible switchgear layout, mounting arrangement and any required fixing accessories using ABB's System Pro E Power documentation.
Designed for Professional ABB System Pro E Power Switchgear Installations
ABB System Pro E Power panel accessories support the construction, maintenance and refurbishment of professionally engineered low-voltage electrical distribution switchboards. The ABB PPFB5080 Blind Flat Panel provides a manufacturer-identified covering component for compatible 50 mm-high, 800 mm-wide panel configurations, helping panel builders and maintenance engineers select the appropriate accessory for their specified switchgear assembly.
