Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007480A0000 ABB PPFB2060 System pro E Power Blind Flat Panel 200 x 600 mm
ABB PPFB2060 (1STQ007480A0000) System pro E Power blind flat panel with a nominal height of 200 mm and width of 600 mm, designed to cover designated sections of compatible modular low-voltage electrical distribution enclosures.
£32.82
Why Choose the ABB PPFB2060 System pro E Power Blind Flat Panel?
The ABB PPFB2060 (1STQ007480A0000) is a blind flat panel designed for use within compatible ABB System pro E Power modular electrical enclosure assemblies. Featuring a manufacturer-specified nominal height of 200 mm and width of 600 mm, this panel provides a solid, flat covering solution for designated sections of professional low-voltage electrical distribution switchboards.
As part of the ABB System pro E Power series, the PPFB2060 supports the construction of modular electrical cabinets by providing a non-glazed, unperforated panel configuration for compatible enclosure arrangements. The blind design is intended to cover designated openings or equipment compartments without incorporating a viewing window or operating cut-outs, helping panel builders create a consistent external panel arrangement.
With its 200 × 600 mm nominal configuration, the ABB PPFB2060 is a practical accessory for industrial switchboard manufacturers, commercial electrical contractors and professional panel builders. Its manufacturer-defined dimensions help identify the appropriate panel for a compatible System pro E Power installation, while the precise fixing arrangement and associated components must be confirmed using ABB's technical documentation.
Key Advantages
- Genuine ABB System pro E Power blind flat panel for compatible modular switchboard assemblies.
- 200 mm nominal height for matching specified electrical enclosure configurations.
- 600 mm nominal width for compatible panel arrangements.
- Blind panel design provides a solid covering without a viewing window.
- Flat configuration supports a consistent appearance across compatible enclosure sections.
- Helps cover designated cabinet openings where access or equipment cut-outs are not required.
- Supports professional low-voltage electrical distribution cabinet construction.
- Provides a manufacturer-identified component for consistent switchboard assembly planning.
- Suitable for compatible industrial and commercial electrical enclosure applications.
- Supports modular panel layouts using ABB System pro E Power components.
- Suitable for new switchboard construction and replacement of matching blind panels.
- Designed for integration with compatible ABB enclosure frames and panel-supporting structures.
Key Features
- ABB System pro E Power series enclosure accessory.
- PPFB2060 manufacturer model designation.
- 1STQ007480A0000 ABB order code.
- Blind flat panel product configuration.
- Nominal height: 200 mm.
- Nominal width: 600 mm.
- Nominal dimensions: 200 × 600 mm (H × W).
- Solid panel configuration without a glazed viewing section.
- Flat external panel design.
- Intended for compatible modular electrical distribution enclosures.
- Supports covering of designated switchboard sections.
- Suitable for professional low-voltage electrical panel-building applications.
- Designed for integration with compatible ABB System pro E Power panel arrangements.
- Suitable for enclosure assembly, modification and refurbishment where specified.
- Installation subject to the relevant ABB technical and assembly instructions.
Reliable Blind Flat Panel Construction for Electrical Distribution Systems
The ABB PPFB2060 blind flat panel is intended for compatible System pro E Power electrical enclosure assemblies where a solid covering panel is required. Unlike glazed panels, a blind panel does not incorporate a viewing window. Its flat configuration provides a straightforward panel surface suitable for designated switchboard sections that do not require a transparent viewing area.
The 200 mm nominal height and 600 mm nominal width are important selection characteristics when matching the PPFB2060 to the intended cabinet layout. These measurements identify the manufacturer's specified panel configuration and should not automatically be treated as exact overall component dimensions or the dimensions of the corresponding enclosure opening.
Blind panels can help separate the accessible exterior of an electrical cabinet from internal components when incorporated into a correctly designed and assembled enclosure. However, the PPFB2060's individual impact resistance, mechanical strength, protective bonding requirements and ingress protection performance are not established by the supplied product description.
For a correct installation, panel builders should verify the compatible enclosure frame, mounting positions, required fasteners and any associated panel-support accessories. The overall degree of protection and electrical safety of the completed switchboard depend on the full enclosure assembly and correct installation in accordance with ABB's technical instructions.
Typical Applications
- ABB System pro E Power modular switchboard construction.
- Covering designated openings in compatible electrical distribution cabinets.
- Low-voltage electrical enclosure assembly.
- Industrial electrical panel-building projects.
- Commercial building power distribution systems.
- Compatible switchboard panel arrangements requiring a 200 × 600 mm nominal configuration.
- Electrical distribution cabinet front-panel layouts.
- Solid covering panels for designated equipment compartments.
- Switchgear and electrical distribution enclosure manufacturing.
- OEM electrical switchboard production.
- Replacement of matching ABB blind flat panels.
- Professional electrical enclosure refurbishment and modification.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| ABB order code | 1STQ007480A0000 |
| Manufacturer description | BLIND FLAT PANEL H=200MM W=600MM |
| Product type | Blind flat panel |
| Component category | Electrical enclosure covering panel |
| Panel configuration | Blind |
| Panel profile | Flat |
| Nominal height | 200 mm |
| Nominal width | 600 mm |
| Nominal dimensions (H × W) | 200 × 600 mm |
| Viewing window | None specified; blind panel configuration |
| Compatible product range | ABB System pro E Power |
| Enclosure system | Modular low-voltage switchboard system |
| Primary application | Covering designated sections of compatible electrical distribution enclosures |
| Ingress protection rating | Not independently specified for this panel |
| Mounting arrangement | Subject to the relevant ABB System pro E Power assembly documentation |
| Installation | According to the applicable ABB technical and assembly instructions |
| Intended users | Electrical panel builders, switchboard manufacturers and qualified installers |
Frequently Asked Questions
What is the ABB PPFB2060 1STQ007480A0000 used for?
The ABB PPFB2060 is a blind flat panel intended for compatible ABB System pro E Power modular electrical enclosure assemblies. It provides a solid covering for designated sections of a low-voltage switchboard where a blind panel configuration is specified.
What are the dimensions of the ABB PPFB2060 blind flat panel?
The ABB PPFB2060 is specified for a nominal height of 200 mm and width of 600 mm. These dimensions identify the manufacturer's panel configuration and should be checked against the relevant ABB enclosure and assembly documentation.
What does blind flat panel mean for the ABB PPFB2060?
A blind flat panel is a solid, flat enclosure covering panel without a glazed viewing window. The ABB PPFB2060 is intended for compatible switchboard sections where this type of panel arrangement is required.
Does the ABB PPFB2060 have an IP protection rating?
The supplied manufacturer description does not specify an independent IP protection rating for the ABB PPFB2060. The ingress protection of a completed switchboard depends on the compatible enclosure system, correctly installed panels, associated components and the overall assembly configuration.
Is the ABB PPFB2060 compatible with every System pro E Power enclosure?
Not necessarily. Although the ABB PPFB2060 belongs to the System pro E Power range, compatibility depends on the enclosure dimensions, panel layout, supporting frame and mounting arrangements. Consult the relevant ABB technical and assembly instructions before selecting or installing the panel.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power accessories support professional low-voltage switchboard construction and flexible modular enclosure design. The PPFB2060 blind flat panel provides a manufacturer-specified 200 × 600 mm configuration for compatible electrical distribution assemblies, helping panel builders create consistent solid-panel arrangements within their intended ABB switchboard systems.
