Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007471A0000 ABB PPFB4040 System pro E Power Blind Flat Panel 400 x 400 mm
ABB PPFB4040 System pro E Power blind flat panel measuring 400 mm high and 400 mm wide for compatible low-voltage electrical switchboard enclosure assemblies.
£50.95
Why Choose the ABB PPFB4040 System pro E Power Blind Flat Panel?
The ABB PPFB4040 is a blind flat panel designed for compatible ABB System pro E Power low-voltage switchboard enclosures. Featuring a specified height of 400 mm and width of 400 mm, this enclosure accessory provides a flat, unperforated panel solution for suitable modular electrical distribution cabinet arrangements.
As part of the ABB System pro E Power enclosure accessory range, the PPFB4040 is intended for applications requiring a blind panel section within a compatible switchboard assembly. Blind panels are commonly used to cover designated enclosure openings, provide a finished appearance and help separate the accessible exterior of an assembly from its internal equipment when installed as part of a correctly designed enclosure system.
The ABB PPFB4040 blind flat panel offers a manufacturer-specified solution for professional electrical panel builders and switchboard manufacturers. Its 400 mm × 400 mm dimensions help engineers identify the appropriate panel size for their intended System pro E Power configuration. Installation compatibility, fixing arrangements and any applicable enclosure protection requirements should be verified against the relevant ABB technical documentation.
Key Advantages
- ABB System pro E Power accessory for compatible low-voltage switchboard enclosures.
- Blind flat panel design for suitable enclosure covering applications.
- 400 mm specified height for accurate panel selection.
- 400 mm specified width for matching enclosure arrangements.
- Square panel format for compatible 400 mm × 400 mm positions.
- Provides an unperforated panel surface for suitable switchboard configurations.
- Supports a neat and consistent appearance across modular electrical distribution assemblies.
- Suitable for professional electrical panel builders and switchboard manufacturers.
- Designed for integration with appropriately selected System pro E Power framing and enclosure components.
- Useful for new switchboard construction, enclosure configuration and compatible replacement applications.
- ABB order code 1STQ007471A0000 enables precise component identification and ordering.
Key Features
- ABB PPFB4040 blind flat panel.
- Part of the System pro E Power low-voltage switchboard enclosure range.
- Blind panel configuration without a designated equipment cut-out.
- Flat panel design for compatible enclosure arrangements.
- 400 mm nominal panel height.
- 400 mm nominal panel width.
- Square 400 mm × 400 mm panel dimensions.
- Intended for covering suitable panel positions within modular switchboards.
- Designed for use with compatible electrical enclosure structures and mounting arrangements.
- Suitable for industrial and commercial electrical distribution cabinet applications.
- Supports professional low-voltage switchboard assembly and finishing.
- Manufacturer identification: ABB 1STQ007471A0000.
Blind Flat Panels for Modular Electrical Switchboard Construction
Low-voltage electrical distribution switchboards require correctly selected enclosure panels to provide suitable equipment coverage, maintain organised compartment arrangements and support professional cabinet construction. The ABB System pro E Power range provides a modular platform incorporating compatible structural frames, enclosure panels and accessories. The ABB PPFB4040 offers a blind flat panel option for designated positions where an equipment opening is not required.
The 400 mm height and 400 mm width of the PPFB4040 are important selection parameters when planning an electrical enclosure layout. Its square format is suited to compatible panel positions requiring these dimensions. Blind panels may be used to cover suitable unused or reserved panel positions, subject to the intended switchboard design. Correct installation should follow ABB assembly instructions, including the required mounting hardware, supporting structure and any specified sealing arrangements. The PPFB4040 does not independently establish an enclosure's IP rating, internal separation classification or electrical safety performance.
Typical Applications
- ABB System pro E Power low-voltage switchboard construction.
- Covering compatible unused panel positions within electrical enclosures.
- Industrial electrical distribution cabinet assemblies.
- Commercial low-voltage distribution switchboards.
- Modular electrical enclosure panel configurations.
- Electrical panel building and switchgear manufacturing.
- Control and automation cabinet enclosure arrangements.
- Compatible 400 mm high and 400 mm wide panel positions.
- Replacement of matching blind flat panels in System pro E Power assemblies.
Technical Specifications
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ007471A0000 |
| Product type | Blind flat panel |
| Accessory category | Electrical enclosure panels |
| Panel configuration | Blind |
| Panel profile | Flat |
| Nominal height | 400 mm |
| Nominal width | 400 mm |
| Panel dimensions | 400 mm × 400 mm |
| Compatible product family | ABB System pro E Power |
| Primary application | Covering compatible panel positions in low-voltage switchboard enclosures |
Frequently Asked Questions
What is the ABB PPFB4040 used for?
The ABB PPFB4040 is a blind flat panel intended for covering suitable panel positions within compatible ABB System pro E Power low-voltage electrical switchboard enclosures.
What are the dimensions of the ABB PPFB4040?
The ABB PPFB4040 has a specified height of 400 mm and width of 400 mm, giving it a square panel format. These dimensions should be checked against the intended enclosure configuration before ordering.
What does blind flat panel mean?
A blind flat panel is a flat enclosure panel without a designated equipment cut-out. It is typically used to cover a suitable panel opening or position where externally accessible equipment does not need to be mounted.
Does the ABB PPFB4040 provide an IP protection rating?
The supplied specification does not identify an independent IP protection rating for the PPFB4040. The protection rating of a completed switchboard depends on the overall enclosure configuration, associated components and correct installation in accordance with ABB documentation.
Which ABB enclosure system is compatible with the PPFB4040?
The PPFB4040 belongs to the ABB System pro E Power low-voltage switchboard enclosure range. Compatibility with a particular frame, mounting arrangement or enclosure configuration should be confirmed using the relevant ABB technical documentation.
Trusted by Electrical Panel Builders and Industrial Engineers Worldwide
ABB System pro E Power enclosure accessories support modular low-voltage switchboard construction for industrial and commercial electrical distribution. The PPFB4040 blind flat panel, measuring 400 mm high and 400 mm wide, provides a manufacturer-specified enclosure component for compatible panel positions, helping professional electrical panel builders achieve organised and consistent switchboard assemblies.
