Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007469A0000 ABB PPFB2540 System pro E Power Blind Flat Panel 250 mm x 400 mm
ABB PPFB2540 (1STQ007469A0000) System pro E Power blind flat panel measuring 250 mm high and 400 mm wide, designed as a solid non-apertured front-panel component for compatible low-voltage electrical switchboard enclosure assemblies.
£33.31
Why Choose the ABB PPFB2540 System pro E Power Blind Flat Panel?
The ABB PPFB2540 (1STQ007469A0000) is a purpose-designed blind flat panel measuring 250 mm high and 400 mm wide, developed for compatible ABB System pro E Power low-voltage electrical switchboard assemblies. This modular enclosure accessory provides a solid, non-apertured front-panel component for electrical distribution cabinets where a continuous protective panel surface is required.
The PPFB2540 blind flat panel is intended for switchboard positions that do not require a front-mounted device opening. Unlike equipment-specific panels featuring apertures for circuit breakers, operating mechanisms or instruments, the blind configuration provides a continuous flat surface. This helps electrical panel builders complete unused front-panel positions while maintaining a consistent and professional appearance across compatible modular switchboard assemblies.
With manufacturer-specified dimensions of 250 mm in height and 400 mm in width, the ABB PPFB2540 provides a clearly identified panel size for suitable System pro E Power configurations. Its solid blind construction, flat profile and ABB order code 1STQ007469A0000 make it a practical choice for new electrical distribution panels, compatible switchboard modifications and replacement front-panel applications.
Key Advantages
- Genuine ABB System pro E Power blind flat panel for compatible modular electrical switchboards.
- 250 mm height and 400 mm width provide manufacturer-defined panel dimensions.
- Solid, non-apertured configuration for front-panel positions where equipment openings are unnecessary.
- Flat panel design supports a clean and consistent switchboard appearance.
- Suitable for covering compatible unused front-panel positions.
- Helps provide a physical barrier between enclosed electrical equipment and the surrounding environment when correctly installed.
- Supports organised front-panel layouts in modular low-voltage distribution assemblies.
- Designed for integration with compatible ABB System pro E Power enclosure components.
- Useful for new switchboard construction, compatible modifications and refurbishment projects.
- Clearly identified by ABB model PPFB2540 and order code 1STQ007469A0000.
Key Features
- ABB System pro E Power electrical enclosure accessory.
- PPFB2540 manufacturer model designation.
- ABB order code 1STQ007469A0000.
- Blind flat panel construction.
- 250 mm manufacturer-specified height.
- 400 mm manufacturer-specified width.
- 250 mm × 400 mm panel dimensions (H × W).
- Solid front configuration without a designated equipment aperture.
- Flat panel profile for compatible switchboard front arrangements.
- Designed for selected modular low-voltage electrical distribution assemblies.
- Suitable for completing compatible unused front-panel positions.
- Supports professional electrical panel building and switchboard assembly.
- Dedicated ABB product reference for accurate identification, specification and replacement.
Professional Front-Panel Protection for Modular Electrical Switchboards
The ABB PPFB2540 blind flat panel is intended for compatible System pro E Power switchboard configurations requiring a solid front-panel component with dimensions of 250 mm × 400 mm. Its blind configuration is particularly useful for positions where no front-mounted electrical device, instrument or operating mechanism is required. By providing a continuous panel surface, the PPFB2540 helps complete the external layout of compatible electrical distribution assemblies.
A correctly selected and installed blind panel contributes to the physical separation of internal electrical components from accessible cabinet areas. However, the protection achieved by the completed switchboard depends on the overall enclosure construction, panel mounting arrangements, sealing provisions and installation quality. The supplied manufacturer specification does not identify a standalone IP rating for the PPFB2540, so any required ingress protection or accessibility classification must be confirmed against the applicable ABB technical documentation.
The manufacturer's 250 mm height and 400 mm width specifications are important when selecting a suitable panel for the intended front-panel arrangement. Before installation, electrical panel builders should verify compatibility with the relevant System pro E Power supporting structure and confirm the required fixing components and installation method. The exact mounting arrangements depend on the selected switchboard configuration.
Typical Applications
- ABB System pro E Power modular switchboard assemblies.
- Low-voltage electrical distribution cabinet front panels.
- Compatible unused electrical switchboard front-panel positions.
- Industrial electrical distribution enclosures.
- Commercial low-voltage switchboard installations.
- Electrical control and power distribution cabinets.
- Solid front-panel arrangements without equipment apertures.
- Professional electrical panel building and switchboard manufacturing.
- Compatible switchboard modifications and refurbishment projects.
- Replacement of matching ABB blind flat panel components.
- Electrical enclosure assemblies requiring a 250 mm × 400 mm blind flat panel.
Technical Specifications
| Product group | System pro E Power |
|---|---|
| Series | System pro E Power |
| ABB order code | 1STQ007469A0000 |
| SKU / MPN | 1STQ007469A0000 |
| Manufacturer designation | BLIND FLAT PANEL H=250MM W=400MM |
| Product type | Blind flat electrical enclosure panel |
| Accessory category | Electrical switchboard front panels and enclosure accessories |
| Panel configuration | Blind / solid / non-apertured |
| Panel profile | Flat |
| Manufacturer-specified panel height | 250 mm |
| Manufacturer-specified panel width | 400 mm |
| Panel dimensions (H × W) | 250 mm × 400 mm |
| Height designation | H=250 mm |
| Width designation | W=400 mm |
| Primary function | Solid front-panel closure for compatible electrical switchboard assemblies |
| Installation application | Electrical switchboard front-panel arrangements |
| Compatible product range | ABB System pro E Power |
| Typical equipment | Low-voltage electrical distribution switchboards |
| Supply format | Blind flat panel component |
Frequently Asked Questions
What is the ABB PPFB2540 (1STQ007469A0000) used for?
The ABB PPFB2540 is a blind flat panel designed for compatible ABB System pro E Power low-voltage electrical switchboard assemblies. It provides a solid front-panel closure for suitable positions where an equipment aperture is not required.
What are the dimensions of the ABB PPFB2540 blind flat panel?
The ABB PPFB2540 has a manufacturer-specified height of 250 mm and width of 400 mm. Its dimensions are therefore 250 mm × 400 mm (H × W).
What does blind flat panel mean for the ABB PPFB2540?
A blind flat panel is a solid, flat front-panel component without a designated opening for electrical equipment. The ABB PPFB2540 is intended for compatible switchboard positions where a continuous front-panel surface is required rather than an aperture for a device or instrument.
Does the ABB PPFB2540 have an IP protection rating?
The supplied manufacturer designation does not specify an individual IP protection rating for the PPFB2540. The ingress protection of a completed switchboard depends on the compatible enclosure assembly, panel installation, sealing arrangements and applicable ABB technical specifications.
Is the ABB PPFB2540 compatible with every System pro E Power enclosure?
Not necessarily. The PPFB2540 belongs to the ABB System pro E Power product group, but compatibility depends on the selected front-panel arrangement and enclosure configuration. Check the applicable ABB technical documentation to confirm that a 250 mm high and 400 mm wide blind flat panel is specified for the intended installation.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power enclosure accessories support professional low-voltage switchboard construction and consistent modular front-panel layouts. The PPFB2540 blind flat panel provides a manufacturer-specified 250 mm × 400 mm solid front-panel component for compatible electrical distribution assemblies, helping panel builders achieve organised, enclosed and professional-looking switchboard installations.
