Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007467A0000 ABB PPFB1540 Blind Flat Panel 150 x 400 mm System pro E power
ABB PPFB1540 is a blind flat enclosure panel measuring 150 mm high by 400 mm wide, designed for compatible ABB System pro E power low-voltage switchgear assemblies.
£26.47
Why Choose the ABB PPFB1540 Blind Flat Panel 150 x 400 mm?
The ABB PPFB1540 is a blind flat panel designed for compatible ABB System pro E power low-voltage switchgear assemblies. Featuring a specified height of 150 mm and width of 400 mm, this panel provides a manufacturer-designated solid covering for compatible electrical distribution enclosure arrangements. Identified by ABB order code 1STQ007467A0000, the PPFB1540 belongs to the ABB System pro E power product group.
The ABB System pro E power range provides modular enclosure and installation solutions for low-voltage electrical distribution equipment. Its coordinated panels, structural components and installation accessories enable electrical panel builders to configure switchgear assemblies according to their installation requirements. The PPFB1540 blind flat panel is intended for compatible enclosure configurations where a solid, non-glazed panel section is specified.
With its flat panel construction, blind configuration and 150 mm × 400 mm nominal dimensions, the ABB PPFB1540 provides a dedicated panel option for compatible System pro E power installations. Its manufacturer-specific model and order code support accurate component identification during switchgear construction, maintenance and refurbishment.
Key Advantages
- Genuine ABB System pro E power enclosure component.
- Blind panel design provides a solid, non-glazed covering.
- Flat configuration for designated switchgear panel arrangements.
- 150 mm nominal height for compatible enclosure sections.
- 400 mm nominal width for the specified panel configuration.
- Supports modular construction of low-voltage electrical distribution assemblies.
- Provides a manufacturer-designated covering for compatible cabinet arrangements.
- Suitable for switchgear designs requiring a blank panel section.
- Supports accurate component selection for enclosure construction and replacement projects.
Key Features
- ABB System pro E power product family.
- PPFB1540 model designation.
- ABB order code 1STQ007467A0000.
- BLIND FLAT PANEL H=150MM W=400MM product designation.
- Blind panel configuration.
- Flat panel design.
- 150 mm specified panel height.
- 400 mm specified panel width.
- Designed for compatible modular low-voltage switchgear enclosures.
- Suitable for designated electrical distribution cabinet panel arrangements.
Technical Specifications
- Manufacturer: ABB
- Product family: System pro E power
- Model: PPFB1540
- ABB order code: 1STQ007467A0000
- Part number: 1STQ007467A0000
- Product designation: BLIND FLAT PANEL H=150MM W=400MM
- Product type: Blind flat panel
- Panel configuration: Blind / non-glazed
- Panel profile: Flat
- Nominal height: 150 mm
- Nominal width: 400 mm
- Compatible enclosure family: ABB System pro E power
- Product category: Low-voltage switchgear enclosure panels
- Primary function: Solid covering for compatible switchgear panel sections
- Application: Low-voltage electrical distribution enclosure construction
Blind Flat Panel Integration for Modular Low-Voltage Switchgear
Low-voltage electrical distribution assemblies use coordinated enclosure panels to organise and cover designated sections of the switchgear structure. Depending on the equipment arrangement, panel builders may require solid panels rather than openings for devices, instruments or controls. Correctly selected blind panels help complete the intended enclosure configuration while maintaining consistency with the manufacturer's modular construction system.
The ABB System pro E power range supports modular switchboard construction through coordinated enclosure structures, internal installation components and panel accessories. The ABB PPFB1540 is identified as a blind flat panel measuring 150 mm high and 400 mm wide, providing a defined product reference for compatible electrical distribution cabinet arrangements requiring these dimensions.
The blind designation identifies a solid panel without a glazed viewing section, while the flat designation describes its panel configuration. The supplied product specification does not independently establish the material, surface finish, ingress protection rating, fastening method or included mounting accessories. These characteristics, together with compatibility with the intended enclosure position, should be confirmed using the relevant ABB System pro E power assembly documentation.
Typical Applications
- ABB System pro E power low-voltage switchgear assemblies.
- Compatible electrical distribution cabinets requiring blind flat panels.
- Industrial power distribution switchboards.
- Commercial building electrical distribution enclosures.
- Modular switchgear panel covering arrangements.
- Enclosure sections requiring a 150 mm-high and 400 mm-wide blind panel.
- Electrical panel manufacturing and switchgear system integration projects.
- Maintenance, refurbishment and replacement of compatible ABB enclosure panels.
Frequently Asked Questions
What is the ABB PPFB1540 blind flat panel used for?
The ABB PPFB1540 is a blind flat panel intended for compatible ABB System pro E power low-voltage switchgear assemblies. It provides a manufacturer-designated solid covering for enclosure sections requiring the specified panel configuration.
What are the dimensions of the ABB PPFB1540?
The ABB PPFB1540 has a specified nominal height of 150 mm and width of 400 mm. These dimensions should be matched to the intended System pro E power enclosure arrangement.
What does blind flat panel mean?
A blind flat panel is a solid, non-glazed panel with a flat configuration. It is used to cover designated enclosure sections rather than provide a transparent viewing area or a device opening.
Is the ABB PPFB1540 compatible with all System pro E power enclosures?
The ABB PPFB1540 belongs to the System pro E power product family, but compatibility with a particular enclosure depends on its dimensions, panel arrangement and installation requirements. The relevant ABB selection and assembly documentation should be checked before ordering.
What is the ABB order code for the PPFB1540 blind flat panel?
The ABB order code is 1STQ007467A0000, identifying the PPFB1540 blind flat panel with a specified height of 150 mm and width of 400 mm within the System pro E power range.
Trusted by Electrical Panel Builders and Switchgear Professionals
ABB System pro E power enclosure components support modular low-voltage electrical distribution installations across industrial and commercial environments. The ABB PPFB1540 blind flat panel provides a manufacturer-designated solution for compatible 150 mm × 400 mm enclosure sections, supporting accurate component selection, coordinated cabinet construction and the integration of solid panel coverings into electrical distribution assemblies.
