Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007462A0000 ABB PFPS2040 Swing Frame for Panels 2000 mm × 400 mm – System Pro E Power
ABB PFPS2040 swing frame measuring 2000 mm high and 400 mm wide, designed for movable panel mounting within compatible ABB System Pro E Power low-voltage switchboard assemblies.
£288.05
Why Choose the ABB PFPS2040 Swing Frame for Panels?
The ABB PFPS2040 is a purpose-designed swing frame for panels measuring 2000 mm in height and 400 mm in width, developed for integration into compatible ABB System Pro E Power low-voltage switchboard assemblies. This mechanical accessory provides a swing-frame mounting arrangement for suitable electrical panels, supporting organised installation and improved access to equipment within modular power distribution enclosures.
As part of the comprehensive ABB System Pro E Power range, the PFPS2040 supports the flexible construction of industrial and commercial electrical switchboards. Its swing-frame configuration provides an alternative to fixed panel mounting arrangements, allowing compatible panel assemblies to be positioned within a movable supporting frame. This arrangement can assist inspection, servicing and maintenance where the completed switchboard design permits appropriate access.
With a specified frame height of 2000 mm and frame width of 400 mm, the ABB PFPS2040 is intended for switchboard configurations requiring these dimensions. Its dedicated design helps electrical panel builders select the appropriate mounting accessory for compatible ABB System Pro E Power installations, supporting consistent mechanical integration and professional switchboard assembly.
Key Advantages
- Genuine ABB System Pro E Power accessory designed for compatible low-voltage switchboard assemblies.
- 2000 mm frame height suitable for panel arrangements requiring this specified dimension.
- 400 mm frame width for accurate integration into compatible switchboard configurations.
- Swing-frame construction provides a movable mounting arrangement for suitable electrical panels.
- Can improve access to equipment and internal components where supported by the switchboard design.
- Supports organised panel positioning and structured electrical enclosure assembly.
- Complements the modular architecture of ABB System Pro E Power switchboards.
- Suitable for professional panel builders, electrical contractors and switchboard manufacturers.
Key Features
- ABB System Pro E Power switchboard accessory.
- Product designation: PFPS2040.
- ABB order code: 1STQ007462A0000.
- Product type: Swing frame for panels.
- Nominal frame height: 2000 mm.
- Nominal frame width: 400 mm.
- Frame configuration: Swing / movable panel support.
- Designed for mounting compatible panels within modular low-voltage switchboards.
- Provides a swing-frame arrangement for suitable access and maintenance configurations.
- Intended for integration with compatible ABB System Pro E Power structural components.
Reliable Swing-Frame Panel Mounting for Low-Voltage Switchboards
Swing frames are mechanical accessories used in electrical switchboard construction to support panels that require a movable mounting arrangement. Unlike conventional fixed frames, a swing-frame design allows the supported panel assembly to move in accordance with its intended mechanical configuration. This can provide improved access to selected internal components during inspection and maintenance, provided that the installation incorporates the necessary clearances, connections and safety provisions.
The ABB PFPS2040 swing frame is specifically identified for panel installations requiring a 2000 mm height and 400 mm width. These dimensions enable panel builders to match the accessory to suitable ABB System Pro E Power configurations, helping maintain the intended panel arrangement within the switchboard enclosure.
ABB System Pro E Power is a modular low-voltage switchboard system designed to accommodate a range of electrical distribution requirements. Its selection of structural frames, mounting accessories and enclosure components supports the construction of switchboards for different industrial and commercial applications. The PFPS2040 forms part of this modular accessory range and should be selected alongside the appropriate compatible panels and associated mounting hardware.
The PFPS2040 is a mechanical swing frame rather than a complete electrical panel or switchboard. The electrical ratings, degree of protection and overall compliance of the finished assembly depend on the selected enclosure, installed equipment and complete switchboard configuration. Installation and operation should follow the applicable ABB System Pro E Power assembly instructions, including any requirements for hinges, movement clearances and cable management.
Typical Applications
- ABB System Pro E Power low-voltage switchboard construction.
- Swing-frame mounting of compatible electrical panels.
- Industrial electrical distribution switchboard assemblies.
- Commercial power distribution and electrical control enclosures.
- Modular switchboard installations requiring movable panel support.
- Electrical panel manufacturing and switchboard fabrication projects.
- Switchboard configurations requiring access to components behind suitable panel assemblies.
- Maintenance, refurbishment and modification of compatible ABB switchboard systems.
Technical Specifications
| Series | System Pro E Power |
|---|---|
| ABB order code | 1STQ007462A0000 |
| Product type | Swing frame for panels |
| Accessory category | Switchboard panel mounting and structural accessories |
| Frame height | 2000 mm |
| Frame width | 400 mm |
| Frame configuration | Swing frame |
| Application | Low-voltage switchboard panel installation |
| System compatibility | ABB System Pro E Power, subject to configuration |
| Installation type | Mechanical mounting within compatible switchboard structures |
| Manufacturer part number | 1STQ007462A0000 |
Frequently Asked Questions
What is the ABB PFPS2040 used for?
The ABB PFPS2040 is a swing frame designed to support compatible panels within ABB System Pro E Power low-voltage switchboard assemblies. It provides a movable panel mounting arrangement for suitable electrical distribution installations.
What are the dimensions of the ABB PFPS2040 swing frame?
The PFPS2040 has a specified height of 2000 mm and a width of 400 mm. These dimensions should be matched to the intended ABB System Pro E Power switchboard configuration.
What is the difference between a swing frame and a fixed panel frame?
A swing frame provides a movable mounting arrangement for compatible panels, whereas a fixed frame holds panels in a stationary installation position. Swing-frame arrangements can improve access to internal equipment when the switchboard is designed and installed for this purpose.
Does the ABB PFPS2040 include the electrical panel itself?
The PFPS2040 is identified as a swing frame for panels, rather than a complete electrical panel assembly. The compatible panels and any additional mounting accessories should be selected according to the relevant ABB System Pro E Power documentation.
Is the ABB PFPS2040 compatible with every System Pro E Power switchboard?
The PFPS2040 belongs to the ABB System Pro E Power accessory range, but compatibility depends on the switchboard dimensions, panel arrangement, available movement clearances and structural configuration. The applicable ABB installation instructions should be checked before selection and assembly.
Trusted ABB Components for Professional Switchboard Construction
ABB System Pro E Power structural and panel mounting accessories, including the PFPS2040 swing frame, support professional electrical panel builders and switchboard manufacturers in creating modular, organised and serviceable low-voltage electrical distribution assemblies.
