Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007457A0000 ABB PFPF2010 System pro E Power Fixed Frame for Panels 2000 x 1000 mm
ABB PFPF2010 System pro E Power fixed frame for panels with a nominal height of 2000 mm and width of 1000 mm for compatible low-voltage electrical switchboard enclosure assemblies.
£161.46
Why Choose the ABB PFPF2010 System pro E Power Fixed Frame for Panels?
The ABB PFPF2010 is a fixed frame for electrical enclosure panels designed for compatible ABB System pro E Power low-voltage switchboard assemblies. Specified with a nominal height of 2000 mm and width of 1000 mm, this enclosure accessory provides a dedicated framing component for suitable modular electrical distribution cabinet configurations.
As part of the ABB System pro E Power enclosure accessory range, the PFPF2010 is intended to support the installation and positioning of compatible enclosure panels within a fixed-frame arrangement. Its manufacturer-specified dimensions help electrical panel builders select an appropriate component when configuring industrial switchboards, electrical distribution assemblies and control cabinet structures.
The ABB PFPF2010 fixed panel frame offers a practical solution for professional switchboard construction where a 2000 mm high and 1000 mm wide framing arrangement is required. Designed for integration with appropriately selected System pro E Power components, it supports modular enclosure assembly while allowing engineers to specify a matching ABB accessory using order code 1STQ007457A0000.
Key Advantages
- ABB System pro E Power fixed frame for compatible electrical enclosure panels.
- 2000 mm nominal height for suitable full-height switchboard arrangements.
- 1000 mm nominal width for matching modular enclosure configurations.
- Fixed-frame design for compatible panel installation arrangements.
- Supports the positioning and integration of enclosure panels within suitable switchboard structures.
- Designed for use with appropriately selected ABB System pro E Power components.
- Suitable for professional electrical panel builders and switchboard manufacturers.
- Supports modular low-voltage electrical distribution enclosure construction.
- Useful for new switchboard assemblies and compatible enclosure modification projects.
- ABB order code 1STQ007457A0000 enables accurate identification and procurement.
Key Features
- ABB PFPF2010 fixed frame for panels.
- Part of the System pro E Power enclosure accessory range.
- Fixed panel frame configuration.
- 2000 mm nominal frame height.
- 1000 mm nominal frame width.
- Designed for compatible low-voltage switchboard enclosure assemblies.
- Provides a framing component for suitable electrical enclosure panel arrangements.
- Supports modular electrical distribution cabinet construction.
- Intended for integration with compatible enclosure structures and panel accessories.
- Suitable for industrial and commercial electrical switchboard applications.
- Manufacturer identification: ABB 1STQ007457A0000.
Fixed Panel Framing for Modular Electrical Distribution Systems
Industrial and commercial low-voltage switchboards require accurately selected enclosure components to support orderly assembly, appropriate equipment accommodation and suitable panel arrangements. The ABB System pro E Power range provides a modular platform for constructing electrical distribution systems using compatible frames, panels, structural components and installation accessories. The ABB PFPF2010 provides a fixed framing option for panel arrangements within this enclosure family.
The 2000 mm height and 1000 mm width of the PFPF2010 are important selection parameters when planning a switchboard configuration. Electrical panel builders should verify the intended panel type, associated mounting components, enclosure dimensions and installation requirements against the applicable ABB documentation. The PFPF2010 is a framing accessory rather than an electrical switching or protective device, and its use does not independently establish the completed enclosure's IP protection rating or mechanical performance.
Typical Applications
- ABB System pro E Power low-voltage switchboard construction.
- Fixed-frame arrangements for compatible electrical enclosure panels.
- Industrial electrical distribution cabinets.
- Commercial low-voltage distribution switchboards.
- Modular electrical enclosure assembly.
- Electrical panel building and switchgear manufacturing.
- Control and automation cabinet construction.
- Compatible 2000 mm high and 1000 mm wide enclosure configurations.
- Replacement or installation of matching System pro E Power panel framing components.
Technical Specifications
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ007457A0000 |
| Product type | Fixed frame for panels |
| Accessory category | Electrical enclosure framing accessories |
| Frame configuration | Fixed |
| Nominal height | 2000 mm |
| Nominal width | 1000 mm |
| Compatible product family | ABB System pro E Power |
| Primary application | Panel framing within compatible low-voltage switchboard enclosures |
Frequently Asked Questions
What is the ABB PFPF2010 used for?
The ABB PFPF2010 is a fixed frame for panels designed for compatible ABB System pro E Power low-voltage switchboard enclosures, providing a framing component for suitable electrical enclosure panel arrangements.
What are the dimensions of the ABB PFPF2010?
The ABB PFPF2010 has a specified nominal height of 2000 mm and width of 1000 mm. These dimensions should be checked against the intended enclosure configuration before ordering.
Is the ABB PFPF2010 a fixed or removable panel frame?
The PFPF2010 is identified as a fixed frame for panels. The supplied specification does not identify it as a removable or hinged frame, and the exact installation arrangement should be confirmed using ABB assembly documentation.
Does the ABB PFPF2010 include the enclosure panels?
The PFPF2010 is specified as a fixed frame for panels. The supplied product information does not confirm that enclosure panels are included, so the contents and any separately required panels or mounting accessories should be verified before ordering.
Which ABB enclosure system is compatible with the PFPF2010?
The PFPF2010 belongs to the ABB System pro E Power low-voltage switchboard enclosure range. Compatibility with particular panel types, enclosure structures and mounting arrangements should be confirmed using the relevant ABB technical documentation.
Trusted by Electrical Panel Builders and Industrial Engineers Worldwide
ABB System pro E Power enclosure accessories support modular low-voltage switchboard construction for industrial and commercial electrical distribution. The PFPF2010 fixed frame for panels, specified at 2000 mm high and 1000 mm wide, provides a manufacturer-identified framing component for compatible electrical enclosure assemblies, helping professional panel builders select suitable hardware for switchboard construction.
