Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PKOH1660 System pro E Power horizontal OT switch installation kit for compatible 160 A, 200 A and 250 A ABB OT switch-disconnector applications in a 250 mm high and 600 mm wide low-voltage switchboard arrangement.
£131.25
The ABB PKOH1660 is a horizontal OT switch installation kit designed for compatible ABB System pro E Power low-voltage switchboard assemblies. Specified for 160 A, 200 A and 250 A OT switch-disconnector applications, the kit is intended for a mounting arrangement with a nominal height of 250 mm and width of 600 mm.
As part of the ABB System pro E Power switchboard accessory range, the PKOH1660 supports the integration of suitable ABB OT switching equipment into modular electrical distribution systems. Its horizontal mounting configuration provides a manufacturer-specific installation option for panel builders incorporating switch-disconnectors into compatible switchboard structures.
The ABB PKOH1660 horizontal OT kit is intended for electrical engineers, switchboard manufacturers and industrial panel builders requiring a correctly specified installation accessory. The stated 250 mm height and 600 mm width are important configuration dimensions, while the 160/200/250 A designations identify the associated OT switch ratings. Compatibility with individual OT models and the exact installation requirements should be confirmed against ABB technical documentation.
Low-voltage electrical distribution switchboards commonly incorporate switch-disconnectors for switching and isolating electrical circuits. ABB OT devices are used in applications involving incoming supplies, distribution feeders and equipment isolation. Correct installation within a switchboard requires a suitable mounting arrangement, adequate operating clearances and appropriately selected structural accessories. The ABB PKOH1660 provides a dedicated installation kit option for compatible System pro E Power assemblies requiring horizontal OT switch mounting.
The PKOH1660 is specified for 160/200/250 A OT applications within a designated 250 mm high and 600 mm wide installation arrangement. These current values refer to the associated switch-disconnector ratings and do not establish an independent current-carrying rating for the installation kit. Selection must account for the exact OT switch model, electrical connections, mounting position, operating clearances and applicable ABB assembly instructions. The installation kit is an accessory and does not itself provide switching, electrical isolation or overcurrent protection.
| Product series | System pro E Power |
|---|---|
| ABB order code | 1STQ007443A0000 |
| Product type | OT switch installation kit |
| Accessory category | Switch-disconnector installation accessories |
| Mounting orientation | Horizontal |
| OT switch rating designations | 160 A / 200 A / 250 A |
| Nominal installation height | 250 mm |
| Nominal installation width | 600 mm |
| Compatible product family | ABB System pro E Power |
| Associated switching equipment | Compatible ABB OT switch-disconnectors |
| Primary application | Horizontal OT switch installation in compatible low-voltage switchboards |
The ABB PKOH1660 is a horizontal OT switch installation kit designed for integrating compatible ABB OT switch-disconnectors into ABB System pro E Power low-voltage switchboard assemblies.
The PKOH1660 is specified as an OT installation kit for 160 A, 200 A and 250 A applications. Compatibility with a particular ABB OT switch model must be confirmed using the relevant ABB technical documentation.
The ABB PKOH1660 is designated for an installation arrangement with a nominal 250 mm height and 600 mm width. These dimensions should be checked against the intended System pro E Power switchboard configuration.
The PKOH1660 is specified for a horizontal OT switch mounting arrangement. The exact mounting configuration and associated components should be checked against ABB installation instructions.
The PKOH1660 is identified as an OT installation kit, rather than a complete switch-disconnector. The supplied specification does not confirm that an OT switching device is included, so the kit contents and any separately required equipment should be verified before ordering.
ABB System pro E Power accessories support modular low-voltage switchboard construction for industrial and commercial electrical distribution. The PKOH1660 horizontal OT installation kit provides a manufacturer-specified accessory for compatible 160 A, 200 A and 250 A OT switch applications in 250 mm high and 600 mm wide installation arrangements, helping electrical panel builders select suitable components for professional switchgear assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.