Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007387A0000 ABB PCRM0538 System Pro E Power 2 Galvanised Steel Crosspieces 538 mm
ABB PCRM0538 (1STQ007387A0000) System Pro E Power set of two 538 mm galvanised sheet-steel closing crosspieces for compatible low-voltage switchboard structures with rear intermediate uprights.
£44.64
ABB PCRM0538 Galvanised Steel Crosspieces – System Pro E Power 538 mm (Pack of 2)
The ABB PCRM0538, manufacturer order code 1STQ007387A0000, is a set of two galvanised sheet-steel crosspieces designed for the ABB System Pro E Power modular low-voltage switchboard system. Identified by the manufacturer as 2 GALVANIZED SHEET CROSSPIECES L=538MM, this accessory provides structural mounting and support within compatible electrical distribution assemblies.
Manufactured from galvanised sheet steel, each crosspiece has a specified length of 538 mm. The galvanised finish provides corrosion resistance, while the formed steel construction offers a practical solution for supporting internal switchboard components. The PCRM0538 belongs to ABB's range of crosspieces used in modular distribution systems, including arrangements involving busbar supports and internal mounting equipment.
The ABB PCRM0538 is particularly suited to closing crosspiece arrangements in switchboard structures incorporating a rear intermediate upright. The manufacturer catalogue associates this crosspiece with compatible 800 mm nominal enclosure configurations. Supplied as a set of two, it offers electrical panel builders and switchboard manufacturers a dedicated mechanical accessory for professional low-voltage distribution installations.
Key Advantages
- Supplied as two galvanised sheet-steel crosspieces.
- 538 mm nominal crosspiece length for compatible switchboard arrangements.
- Part of the ABB System Pro E Power modular distribution system.
- Designed for closing crosspiece applications within suitable switchboard structures.
- Compatible with designated arrangements incorporating a rear intermediate upright.
- Galvanised steel construction provides mechanical strength and corrosion resistance.
- Supports the installation of compatible internal switchboard components.
- Can form part of an internal support arrangement for appropriately selected busbar holders.
- Manufacturer-specific dimensions help simplify component selection.
- Suitable for industrial and commercial electrical distribution assemblies.
Key Features
- ABB type designation: PCRM0538.
- ABB order code: 1STQ007387A0000.
- Product group: System Pro E Power.
- Manufacturer description: 2 GALVANIZED SHEET CROSSPIECES L=538MM.
- Product type: Galvanised sheet-steel crosspiece set.
- Quantity: 2 crosspieces.
- Crosspiece length: 538 mm.
- Material: Galvanised sheet steel.
- Nominal profile height: 47.5 mm.
- Nominal profile depth: 47.5 mm.
- Designed for compatible closing crosspiece configurations.
- Associated with 800 mm nominal switchboard structures using a rear intermediate upright.
- Suitable for internal mounting and support applications.
- Designed for integration into professional low-voltage switchboard assemblies.
Technical Specifications
- Manufacturer: ABB
- Product group: System Pro E Power
- Series: System Pro E Power
- Type / model: PCRM0538
- Manufacturer order code: 1STQ007387A0000
- EAN: 8015646783837
- Manufacturer designation: 2 GALVANIZED SHEET CROSSPIECES L=538MM
- Product category: Switchboard internal mounting accessories
- Product type: Galvanised sheet-steel crosspieces
- Quantity supplied: 2 crosspieces
- Crosspiece length: 538 mm
- Profile height: 47.5 mm
- Profile depth: 47.5 mm
- Material: Galvanised sheet steel
- Material finish: Galvanised
- Crosspiece application: Closing crosspieces
- Compatible structural arrangement: Switchboards with a rear intermediate upright
- Associated nominal enclosure dimension: 800 mm
- Installation system: ABB System Pro E Power modular switchboards
- Primary function: Mechanical support and mounting of compatible internal switchboard components
- Component classification: Mechanical switchboard accessory
- Application: Low-voltage electrical distribution assemblies
Galvanised Steel Crosspieces for Reliable Switchboard Construction
The ABB PCRM0538 galvanised steel crosspieces are designed to form part of the internal mechanical structure of compatible System Pro E Power switchboards. Crosspieces provide fixing and support positions for internal components, helping panel builders create organised electrical distribution assemblies with the correct mounting geometry.
The PCRM0538 is specifically listed among ABB's closing galvanised sheet-metal crosspieces. Its 538 mm length corresponds to an application involving a rear intermediate upright in a compatible 800 mm nominal enclosure arrangement. This distinction is important because the PCRM0538 should not be confused with the longer PCRM0788 crosspiece, which is associated with a different internal structural configuration.
ABB's galvanised sheet-steel crosspiece system is designed for integration with suitable mounting brackets and internal support components. Depending on the complete switchboard arrangement, compatible crosspieces can be used to accommodate insulating supports for busbar holders and other mechanical equipment. The exact mounting positions and accessories must be selected in accordance with the relevant ABB assembly instructions.
The galvanised steel construction provides a durable mechanical component for use within professional electrical distribution enclosures. Galvanisation helps protect the steel surface against corrosion under suitable installation conditions, while the formed profile supports the structural requirements of the intended mounting arrangement.
The ABB PCRM0538 is a mechanical accessory rather than an electrical protection device. It does not independently provide a current rating, circuit isolation, overload protection or short-circuit protection. Where crosspieces are incorporated into busbar-support arrangements, the electrical performance and permissible operating conditions must be established from the complete ABB switchboard design, busbar system and associated components.
For correct installation, both supplied crosspieces should be fitted only in compatible System Pro E Power configurations using the specified brackets, fasteners and supporting structural components. The completed assembly should follow ABB's installation documentation and applicable low-voltage switchboard construction requirements.
Typical Applications
- ABB System Pro E Power low-voltage switchboards.
- Closing crosspiece arrangements in compatible modular enclosures.
- Switchboard structures incorporating rear intermediate uprights.
- Internal mechanical support for electrical distribution assemblies.
- Compatible busbar support mounting arrangements.
- Industrial power distribution switchboards.
- Commercial building electrical distribution panels.
- Main and secondary electrical distribution assemblies.
- OEM electrical panel building and switchboard manufacturing.
- Maintenance, refurbishment and structural modification of compatible ABB switchboards.
Frequently Asked Questions
What is the ABB PCRM0538 used for?
The ABB PCRM0538 is a set of two galvanised sheet-steel crosspieces used for internal mechanical support in compatible ABB System Pro E Power switchboards. It is specifically associated with closing crosspiece arrangements involving a rear intermediate upright.
What is the ABB order code for PCRM0538?
The official ABB manufacturer order code is 1STQ007387A0000, corresponding to the PCRM0538 set of two galvanised steel crosspieces, each with a length of 538 mm.
How many crosspieces are supplied with the ABB PCRM0538?
The ABB PCRM0538 is supplied as a set of two crosspieces, as specified in the manufacturer's product description.
What is the length of each PCRM0538 crosspiece?
Each crosspiece has a specified length of 538 mm. This is the actual crosspiece length and should not be confused with the nominal dimensions of the compatible switchboard structure.
What material is the ABB PCRM0538 manufactured from?
The PCRM0538 crosspieces are manufactured from galvanised sheet steel, providing a robust mechanical component with a corrosion-resistant surface finish for suitable switchboard installations.
What are the profile dimensions of the PCRM0538?
The crosspieces have a specified 538 mm length and a nominal profile height and depth of approximately 47.5 mm each.
Which switchboard configurations use the PCRM0538?
The PCRM0538 is listed for closing crosspiece applications in structures with a rear intermediate upright, associated with a compatible 800 mm nominal enclosure configuration. The complete structural arrangement must be checked against ABB's assembly documentation.
Can the PCRM0538 be used to support busbar mounting components?
ABB's galvanised crosspiece system supports compatible internal mounting arrangements, including selected busbar-support applications. Whether the PCRM0538 can be used for a particular busbar arrangement depends on the specified brackets, insulating supports and complete switchboard configuration.
Does the ABB PCRM0538 have an electrical current rating?
No independent current rating is assigned to the PCRM0538 mechanical crosspiece set. Electrical ratings are determined by the complete switchboard assembly, including its busbar system, protective devices and supporting components.
Is the PCRM0538 interchangeable with other ABB PCRM crosspieces?
Not automatically. ABB PCRM crosspieces are available in different lengths and for different structural arrangements. The 538 mm PCRM0538 must be matched to its specified installation geometry rather than substituted for a different crosspiece solely because it belongs to the same product family.
Trusted by Electrical Panel Builders Worldwide
ABB System Pro E Power accessories provide coordinated mechanical solutions for professional low-voltage switchboard construction. The ABB PCRM0538 set of two 538 mm galvanised steel crosspieces supports compatible closing crosspiece arrangements with rear intermediate uprights, helping panel builders achieve organised and structurally consistent electrical distribution assemblies.
