Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLB2040 is an IP40 solid steel blind enclosure door measuring 2000 x 400 mm, featuring a gasket-free design, reversible hinged mounting and a 12-module DIN configuration for ABB System pro E Power low-voltage distribution switchboards.
£207.79
The ABB PDLB2040 is a durable IP40 solid blind enclosure door designed for ABB System pro E Power low-voltage electrical distribution switchboards. With a nominal height of 2000 mm and width of 400 mm, this single-door enclosure accessory provides secure physical separation and convenient access to electrical equipment installed within compatible modular switchboard structures.
As part of the ABB System pro E Power range, the PDLB2040 is manufactured from pickled sheet steel and features a solid, opaque surface. Its gasket-free construction is suitable for IP30 and IP40 enclosure configurations, with four rubber buffer plugs incorporated into the door arrangement. The robust design supports dependable operation in industrial and commercial electrical distribution installations.
The PDLB2040 is designed for reversible hinged installation and can be mounted at the front or rear of compatible switchboard structures, subject to the assembly's protection requirements. The door opens through approximately 135° in single-column configurations and is supplied with four hinges, four door closing brackets with covers and a handle. Its 400 mm width corresponds to a 12-module DIN configuration within the ABB System pro E Power enclosure system.
The ABB PDLB2040 provides a practical protective closure for modular electrical distribution switchboards. Its 2000 mm-high, 400 mm-wide solid steel construction is designed for compatible System pro E Power columns, helping restrict direct access to installed electrical equipment while allowing authorised personnel to open the enclosure for inspection and maintenance.
The IP40 protection classification indicates protection against access by small solid objects and ingress of solid foreign objects measuring 1 mm or greater when the complete enclosure is correctly configured. IP40 does not provide a water-ingress protection rating. The PDLB2040 is therefore intended for applications where the environmental conditions and the completed switchboard design are compatible with this protection level.
The door's reversible hinged construction supports installation flexibility, while the supplied hinges, closing brackets and handle simplify integration into compatible switchboard assemblies. Its gasket-free design and rubber buffer plugs are characteristic of the ABB System pro E Power IP30/IP40 blind-door range. Where an IPX1 water-protection classification is required, the appropriate additional top sealing components must be selected for the completed enclosure.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ007369A0000 |
| EAN | 8015646783363 |
| Product type | Blind electrical enclosure door |
| Product category | Switchboard enclosure accessories |
| Door configuration | Single hinged door |
| Door surface | Solid, opaque |
| Nominal height | 2000 mm |
| Nominal width | 400 mm |
| Protection rating | IP40 |
| Material | Pickled sheet steel |
| Perimeter gasket | Not included |
| Rubber buffer plugs | 4 |
| Opening angle | Approximately 135° in single-column configurations |
| Number of hinges | 4 |
| Door closing brackets | 4 with covers |
| Handle | Included |
| Mounting type | Hinged, reversible mounting |
| Mounting position | Front or rear, subject to assembly requirements |
| DIN module configuration | 12 modules |
| Packaging quantity | 1 piece |
| Compatible enclosure range | ABB System pro E Power |
| Suitable for | Modular main distribution boards |
| Application | Low-voltage electrical distribution switchboards |
| ABB product group | System Pro E Power |
The ABB PDLB2040 is a solid blind enclosure door designed for ABB System pro E Power modular main distribution boards. It provides a protective access closure for compatible low-voltage electrical switchboard structures.
The PDLB2040 has a nominal height of 2000 mm and a nominal width of 400 mm. It is designed for compatible ABB System pro E Power switchboard columns with a 12-module DIN configuration.
The PDLB2040 is designed for IP40 enclosure configurations. When correctly installed within a compatible assembly, this rating provides protection against solid foreign objects of 1 mm or greater. IP40 does not indicate protection against water ingress.
Yes. The PDLB2040 is supplied with four screw-mounted hinges, four door closing brackets with covers and a handle. The handle and hinges are supplied unassembled to support reversible installation.
No. The PDLB2040 is a gasket-free blind door designed for IP30 and IP40 switchboard configurations. It includes four rubber buffer plugs, and the final enclosure protection rating depends on the complete assembly.
ABB System pro E Power enclosure components are engineered for modular low-voltage electrical distribution systems. The PDLB2040 IP40 blind door combines durable steel construction, reversible installation and convenient maintenance access, providing a practical enclosure solution for professional electrical panel builders, industrial installers and switchboard engineers.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.