Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLB1880 System pro E Power IP40 blind enclosure door with a solid non-glazed front for compatible modular low-voltage switchboard cabinets measuring 1800 mm high and 800 mm wide.
£338.71
The ABB PDLB1880 is a purpose-designed IP40 blind enclosure door for compatible ABB System pro E Power modular low-voltage distribution switchboards. Identified by manufacturer order code 1STQ007364A0000, this enclosure accessory is specified for a nominal cabinet height of 1800 mm and width of 800 mm, providing a solid, non-glazed front closure for electrical distribution cabinets.
Designed for professional electrical switchboard construction, the PDLB1880 combines a blind door configuration with an IP40 protection classification. Unlike glazed enclosure doors, a blind door provides an opaque front surface without an integrated viewing window, making it suitable for installations where direct visual observation of internal equipment through the closed door is unnecessary.
As part of the ABB System pro E Power modular enclosure platform, the PDLB1880 supports coordinated cabinet assembly for industrial and commercial low-voltage electrical distribution applications. Its 1800 mm height and 800 mm width provide important selection criteria for matching the door to the intended switchboard enclosure structure.
The ABB PDLB1880 blind door provides a dedicated protective access component for compatible System pro E Power low-voltage switchboard enclosures. Correct door selection is important in modular cabinet construction because the door must correspond to the intended enclosure dimensions, access arrangement and environmental protection requirements.
The specified IP40 classification indicates protection against access and ingress by solid objects of 1 mm diameter or greater under the applicable IEC 60529 classification. The second digit, zero, indicates that no water-ingress protection is specified by this rating. An IP40 enclosure arrangement should therefore not be treated as equivalent to an IP54 or IP65 configuration where additional environmental protection is required.
The blind door configuration provides an opaque cabinet front without an integrated glazed viewing section. This arrangement is appropriate where equipment visibility through the closed door is unnecessary or where a solid enclosure appearance is preferred. Access to internal electrical equipment for inspection or maintenance must be managed through the completed switchboard's intended operating and safety procedures.
With a nominal 1800 mm height and 800 mm width, the PDLB1880 is intended for the corresponding System pro E Power cabinet configuration. These dimensions are essential selection criteria because enclosure doors designed for different cabinet heights or widths should not be assumed interchangeable, even when they belong to the same ABB product family.
The ABB System pro E Power range provides a modular platform for constructing low-voltage distribution switchboards using coordinated structural components, mounting accessories, panels and enclosure doors. The PDLB1880 forms part of this mechanical enclosure system, supporting the selection of a suitable front closure for compatible cabinet sections.
When installing the PDLB1880, the appropriate cabinet structure, door mounting arrangement and associated components should be selected according to ABB's applicable assembly instructions. The supplied product designation does not independently establish the hinge arrangement, locking mechanism, material thickness, colour or inclusion of separate mounting accessories.
ABB System pro E Power supports the construction of low-voltage distribution assemblies designed and verified in accordance with applicable IEC 61439 requirements. The PDLB1880 is an enclosure accessory rather than a complete electrical distribution assembly. Final compliance, electrical safety, structural integrity and environmental protection depend on the complete switchboard design, verification and installation.
By combining an IP40 protection designation, a blind door configuration and dimensions suited to compatible 1800 × 800 mm System pro E Power cabinet sections, the ABB PDLB1880 provides a practical enclosure door solution for professional low-voltage power distribution projects.
| Product range | System pro E Power |
|---|---|
| ABB order code | 1STQ007364A0000 |
| Manufacturer designation | IP40 BLIND DOOR H=1800MM W=800MM |
| Product type | Blind switchboard enclosure door |
| Product category | Low-voltage switchboard enclosure accessories |
| Specified IP classification | IP40 |
| Door configuration | Blind / non-glazed |
| Nominal height | 1800 mm |
| Nominal width | 800 mm |
| Compatible enclosure system | ABB System pro E Power |
| Application | Modular low-voltage electrical distribution switchboards |
| Functional purpose | Protective enclosure access door with opaque front surface |
| Installation type | Mechanical integration into compatible ABB switchboard enclosure structures |
The ABB PDLB1880 is an IP40-designated blind enclosure door for compatible ABB System pro E Power modular low-voltage switchboards. It provides a protective cabinet access closure with an opaque, non-glazed front.
The PDLB1880 is specified for a nominal cabinet height of 1800 mm and width of 800 mm. These dimensions identify the intended compatible enclosure configuration.
The manufacturer's designation specifies IP40. This classification provides protection against solid objects of 1 mm diameter or greater but does not specify protection against water ingress. The completed enclosure must be correctly assembled to achieve its intended protection level.
A blind door is an opaque enclosure door without an integrated glazed viewing section. It provides a solid front closure for the compatible cabinet while allowing access when opened according to the switchboard's operating and safety procedures.
The PDLB1880 belongs to the ABB System pro E Power modular low-voltage switchboard range and is intended for compatible cabinet structures with a nominal height of 1800 mm and width of 800 mm.
The PDLB1880 is identified as a blind enclosure door, not a complete electrical distribution board. Circuit breakers, mounting components and other internal electrical equipment must be selected separately according to the switchboard design.
The PDLB1880 has an IP40 designation, which does not specify protection against water ingress. It should not be assumed suitable for exposed outdoor installations without an appropriately designed and protected enclosure arrangement.
No. The PDLB1880 is specified as a blind door, meaning it has a non-glazed front configuration. Applications requiring equipment visibility through a closed door should use an appropriately specified compatible glazed door instead.
Both products are IP40 blind doors within the ABB System pro E Power range and are specified for a nominal cabinet height of 1800 mm. The PDLB1880 is designed for a nominal cabinet width of 800 mm, whereas the PDLB1860 is specified for a width of 600 mm. The correct model should be selected according to the intended enclosure dimensions.
The manufacturer's order code is 1STQ007364A0000, identifying the ABB PDLB1880 IP40 blind door for compatible 1800 mm high and 800 mm wide System pro E Power switchboard enclosures.
ABB System pro E Power enclosure accessories provide electrical engineers, switchboard manufacturers and panel builders with coordinated modular components for low-voltage distribution cabinet construction, supporting appropriate equipment access, protective enclosure design and practical integration into industrial and commercial electrical infrastructure.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.