Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLB1840 (1STQ007362A0000) System pro E Power IP40 blind electrical enclosure door for compatible 1800 x 400 mm modular low-voltage distribution cabinets, providing a solid non-glazed front closure for protected access to internal switchboard equipment.
£184.70
The ABB PDLB1840 (1STQ007362A0000) is a purpose-designed IP40 blind electrical enclosure door for the ABB System pro E Power modular switchboard range. Intended for compatible electrical distribution cabinets with a nominal height of 1800 mm and width of 400 mm, this solid, non-glazed door provides a protective front closure for low-voltage electrical equipment.
As part of the ABB System pro E Power series, the PDLB1840 supports professional switchboard construction, electrical distribution installations and modular enclosure assembly. Its blind door design conceals the electrical components installed behind it, making it suitable for cabinet sections where a transparent viewing window is unnecessary. The specified IP40 protection classification supports protection against solid-object ingress when the door is correctly installed as part of a compatible enclosure assembly.
With a nominal height of 1800 mm and width of 400 mm, the ABB PDLB1840 is suited to narrow-format modular distribution cabinets. Its solid front design provides a practical solution for industrial electrical installations, commercial power distribution systems and professional panel builders requiring protected access to internal switchboard equipment.
The ABB PDLB1840 IP40 blind door is designed to provide a protective front closure for compatible System pro E Power switchboard structures. Its solid, non-glazed construction conceals internal electrical components and provides a consistent cabinet appearance where continuous visual monitoring is unnecessary. This makes the PDLB1840 suitable for distribution cabinet sections containing internal electrical connections, switchgear assemblies and other equipment that requires access during authorised inspection or maintenance.
The IP40 classification indicates protection against solid objects measuring 1 mm or greater, but does not provide a rated level of protection against water ingress. The protection achieved by the completed switchboard depends on the overall enclosure construction, component compatibility and correct installation. Designed for 1800 × 400 mm nominal cabinet configurations, the PDLB1840 supports ABB's modular approach to low-voltage electrical distribution and is particularly useful for narrower enclosure sections in protected indoor environments.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ007362A0000 |
| Product type | Blind electrical enclosure door |
| Manufacturer description | IP40 BLIND DOOR H=1800MM W=400MM |
| Protection rating | IP40 |
| Solid-object protection | Protection against solid objects of 1 mm diameter or greater |
| Water ingress protection | No rated water protection under IP40 |
| Nominal enclosure height | 1800 mm |
| Nominal enclosure width | 400 mm |
| Nominal enclosure dimensions (H × W) | 1800 × 400 mm |
| Door type | Blind / solid enclosure door |
| Viewing window | None |
| Installation position | Front of compatible electrical enclosure |
| Compatible product range | ABB System pro E Power |
| Enclosure system | Modular low-voltage switchboard system |
| Application | Electrical distribution cabinet protection and access |
| Component category | Switchboard door / enclosure accessory |
| Installation method | Integration into a compatible modular enclosure assembly |
| Typical installation environment | Protected indoor electrical distribution areas |
The ABB PDLB1840 is an IP40 blind enclosure door designed for compatible ABB System pro E Power modular electrical distribution cabinets. It provides a solid protective front closure for switchboard sections where a transparent viewing window is not required.
The PDLB1840 is designed for compatible System pro E Power enclosures with a nominal 1800 mm height and 400 mm width. These dimensions identify the intended cabinet configuration rather than the exact external measurements of the individual door.
IP40 indicates protection against solid objects of 1 mm diameter or greater, with no rated protection against water ingress. The completed enclosure must be correctly assembled using compatible components to achieve its intended protection level.
A blind door has a solid front without a transparent viewing window, whereas a glazed door allows visual inspection of equipment inside the enclosure. The ABB PDLB1840 is intended for applications where a solid protective closure is preferred and routine viewing of internal equipment is unnecessary.
The PDLB1840 has an IP40 classification, which does not provide a rated level of protection against water ingress. It is therefore generally suited to protected indoor installations rather than exposed outdoor environments. The suitability of the completed enclosure must be assessed against the actual installation conditions.
ABB System pro E Power enclosure components support professional low-voltage switchboard construction and flexible modular cabinet design. The PDLB1840 IP40 blind door provides a purpose-designed solid closure for compatible 1800 × 400 mm distribution cabinets, combining protected equipment access, concealed internal components and integration with ABB's established electrical distribution system.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.