Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007355A0000 ABB PDLB2046 IP65 Blind Door 2000 x 400 mm System pro E power
ABB PDLB2046 is an IP65 blind enclosure door measuring 2000 mm high by 400 mm wide, designed for compatible ABB System pro E power low-voltage switchgear assemblies.
£250.15
Why Choose the ABB PDLB2046 IP65 Blind Door?
The ABB PDLB2046 is an IP65 blind enclosure door designed for compatible ABB System pro E power low-voltage switchgear assemblies. Featuring a specified height of 2000 mm and width of 400 mm, this enclosure accessory provides a manufacturer-designated solid door configuration for electrical distribution cabinets requiring a closed front covering. Identified by ABB order code 1STQ007355A0000, the PDLB2046 belongs to the ABB System pro E power product group.
The ABB System pro E power range provides modular enclosure solutions for low-voltage electrical distribution equipment. Its coordinated cabinet structures, doors and installation accessories enable electrical panel builders to configure switchgear assemblies according to specific installation requirements. The PDLB2046 blind door is intended for compatible enclosure arrangements where a non-glazed covering is specified as part of the overall cabinet construction.
With its IP65 protection designation, blind door construction and 2000 mm × 400 mm nominal dimensions, the ABB PDLB2046 provides a dedicated enclosure door option for compatible System pro E power installations. The IP65 designation identifies protection against dust ingress and water jets when the relevant enclosure configuration is correctly assembled and meets the manufacturer's requirements.
Key Advantages
- Genuine ABB System pro E power enclosure accessory.
- IP65 protection designation for compatible enclosure arrangements.
- Blind door construction provides a solid, non-glazed front covering.
- 2000 mm nominal height for designated switchgear cabinets.
- 400 mm nominal width for compatible enclosure configurations.
- Supports modular construction of low-voltage electrical distribution assemblies.
- Suitable for enclosure designs requiring a closed door rather than a glazed alternative.
- Provides a manufacturer-designated component for accurate switchgear assembly planning.
- Supports compatible enclosure maintenance, refurbishment and replacement projects.
Key Features
- ABB System pro E power product family.
- PDLB2046 model designation.
- ABB order code 1STQ007355A0000.
- IP65 protection designation.
- Blind enclosure door configuration.
- 2000 mm specified door height.
- 400 mm specified door width.
- Solid, non-glazed door design.
- Designed for compatible modular low-voltage switchgear enclosures.
- Suitable for designated industrial and commercial electrical distribution cabinet arrangements.
Technical Specifications
- Manufacturer: ABB
- Product family: System pro E power
- Model: PDLB2046
- ABB order code: 1STQ007355A0000
- Product designation: IP65 BLIND DOOR H=2000MM W=400MM
- Product type: Blind enclosure door
- Protection designation: IP65
- Door configuration: Blind / non-glazed
- Nominal height: 2000 mm
- Nominal width: 400 mm
- Installation position: Door of compatible enclosure
- IP6X classification: Dust-tight protection
- IPX5 classification: Protection against water jets
- Compatible enclosure family: ABB System pro E power
- Product category: Low-voltage switchgear enclosure doors
- Primary function: Solid door covering for compatible electrical distribution enclosures
- Application: Low-voltage switchgear and electrical distribution cabinet construction
IP65 Blind Door Integration for Low-Voltage Switchgear Enclosures
Low-voltage electrical distribution cabinets accommodate circuit breakers, protective devices, busbar systems and control equipment within a structured enclosure. Correctly specified doors form an important part of the cabinet assembly, providing a protective covering for the installed electrical equipment. Blind door configurations are suitable where a solid front covering is required rather than a glazed panel.
The ABB System pro E power range supports modular switchboard construction through coordinated cabinet structures, internal installation components and enclosure accessories. The PDLB2046 is designated as an IP65 blind door measuring 2000 mm high and 400 mm wide, providing a defined component for compatible electrical distribution assemblies requiring these dimensions.
The IP65 designation identifies dust-tight protection and resistance to water jets under the applicable ingress protection classification. However, the completed switchgear enclosure must be assessed as an assembly, including the cabinet structure, door sealing arrangement, cable entries and other fitted components. The supplied product designation does not independently confirm the door material, finish, hinge arrangement, locking mechanism or included mounting accessories. These details should be verified against the relevant ABB System pro E power documentation.
Typical Applications
- ABB System pro E power low-voltage switchgear enclosures.
- Compatible electrical distribution cabinets requiring IP65 blind door arrangements.
- Industrial power distribution switchboards.
- Commercial building electrical distribution assemblies.
- Modular electrical cabinets requiring solid, non-glazed doors.
- Switchgear installations requiring a 2000 mm-high and 400 mm-wide enclosure door.
- Electrical panel manufacturing and switchgear system integration projects.
- Maintenance, refurbishment and replacement of compatible ABB enclosure doors.
Frequently Asked Questions
What is the ABB PDLB2046 blind door used for?
The ABB PDLB2046 is an IP65 blind enclosure door intended for compatible ABB System pro E power low-voltage switchgear assemblies. It provides a designated solid, non-glazed covering for electrical distribution cabinets.
What are the dimensions of the ABB PDLB2046?
The ABB PDLB2046 has a specified nominal height of 2000 mm and width of 400 mm. These dimensions should be matched to the intended System pro E power enclosure configuration.
What does IP65 mean for the ABB PDLB2046 blind door?
IP65 indicates dust-tight protection and protection against water jets. The final ingress protection rating depends on the complete enclosure configuration, associated sealing components and correct installation.
What is the difference between a blind door and a glazed door?
A blind door provides a solid, non-glazed covering, whereas a glazed door incorporates a transparent viewing area. The appropriate door type depends on the enclosure design, equipment visibility requirements and specified protection arrangement.
What is the ABB order code for the PDLB2046 IP65 blind door?
The ABB order code is 1STQ007355A0000, identifying the PDLB2046 IP65 blind door with a specified height of 2000 mm and width of 400 mm within the System pro E power range.
Trusted by Electrical Panel Builders and Switchgear Professionals
ABB System pro E power enclosure components support modular low-voltage electrical distribution installations across industrial and commercial environments. The ABB PDLB2046 IP65 blind door provides a manufacturer-designated solution for compatible 2000 mm × 400 mm enclosure arrangements, supporting accurate component selection, coordinated cabinet construction and the design of suitably protected electrical distribution assemblies.
