Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLG2440 (1STQ007339A0000) System pro E Power IP40 glazed electrical enclosure door for compatible 2000 x 800 mm modular low-voltage distribution cabinets, featuring a 12 DIN configuration and transparent viewing area for equipment inspection.
£690.08
The ABB PDLG2440 (1STQ007339A0000) is a purpose-designed IP40 glazed electrical enclosure door for the ABB System pro E Power modular switchboard range. Designed for compatible electrical distribution cabinets with a nominal height of 2000 mm and width of 800 mm, this door combines protected front access with convenient visibility of installed electrical equipment.
As part of the ABB System pro E Power series, the PDLG2440 supports professional low-voltage switchboard construction and modular electrical distribution installations. Its glazed viewing area allows operators and maintenance personnel to inspect visible meters, indicators and electrical components without routinely opening the cabinet. The specified IP40 protection classification supports protection against solid-object ingress when correctly installed as part of a compatible enclosure assembly.
With a nominal enclosure height of 2000 mm, width of 800 mm and a 12 DIN configuration identified in the supplied manufacturer specification, the ABB PDLG2440 is intended for tall, wide-format modular distribution cabinets. It is a practical enclosure accessory for industrial electrical installations, commercial distribution systems and professional switchboard manufacturers requiring equipment visibility and protected cabinet access.
The ABB PDLG2440 IP40 glazed door is designed to provide a protective front closure for compatible System pro E Power switchboard structures while allowing visual inspection of installed electrical equipment. Glazed enclosure doors are especially useful in distribution systems containing meters, monitoring instruments and status indicators that require periodic observation. By allowing these components to remain visible, the PDLG2440 can reduce the need to open the enclosure for routine visual checks.
The IP40 classification indicates protection against ingress of solid objects measuring 1 mm or greater, but does not provide a rated level of protection against water. The protection achieved by the finished switchboard depends on the complete enclosure construction, component compatibility and correct installation. Designed for 2000 × 800 mm nominal cabinet configurations, the PDLG2440 supports ABB's modular approach to low-voltage electrical distribution, making it suitable for protected indoor installations where visibility and solid-object protection are important.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ007339A0000 |
| Product type | Glazed electrical enclosure door |
| Manufacturer description | IP40 GL.DOOR 12 DIN H=2000MM W=800MM |
| Protection rating | IP40 |
| Solid-object protection | Protection against solid objects of 1 mm diameter or greater |
| Water ingress protection | No rated water protection under IP40 |
| Nominal enclosure height | 2000 mm |
| Nominal enclosure width | 800 mm |
| Nominal enclosure dimensions (H × W) | 2000 × 800 mm |
| DIN configuration | 12 DIN |
| Door type | Glazed / transparent viewing door |
| Installation position | Front of compatible electrical enclosure |
| Compatible product range | ABB System pro E Power |
| Enclosure system | Modular low-voltage switchboard system |
| Application | Electrical distribution cabinet protection and access |
| Component category | Switchboard door / enclosure accessory |
| Installation method | Integration into a compatible modular enclosure assembly |
| Typical installation environment | Protected indoor electrical distribution areas |
The ABB PDLG2440 is an IP40 glazed enclosure door designed for compatible ABB System pro E Power modular electrical distribution cabinets. It provides a protective front closure while allowing visual inspection of installed electrical equipment.
The PDLG2440 is designed for compatible System pro E Power enclosures with a nominal 2000 mm height and 800 mm width. These dimensions describe the intended cabinet configuration rather than the exact external measurements of the individual door.
IP40 indicates protection against solid objects of 1 mm diameter or greater, with no rated protection against water ingress. The completed enclosure must be correctly assembled using compatible components to achieve its intended protection level.
The manufacturer identifies the PDLG2440 as a 12 DIN glazed door. This designation relates to its intended modular switchboard configuration and should not be interpreted as the total number of individual electrical devices that can be installed inside the enclosure.
Yes. The glazed viewing area allows operators to inspect visible meters, indicators and electrical components without routinely opening the cabinet. This supports convenient equipment monitoring while retaining the enclosure's protective front closure during normal operation.
ABB System pro E Power enclosure components support professional low-voltage switchboard construction and flexible modular cabinet design. The PDLG2440 IP40 glazed door provides a purpose-designed solution for compatible 2000 × 800 mm distribution cabinets, combining protected enclosure access, convenient equipment visibility and integration with ABB's established electrical distribution system.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.