Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLG2420 System pro E Power IP40 glazed enclosure door with a 12 DIN designation for compatible modular low-voltage switchboard cabinets measuring 2000 mm high and 600 mm wide.
£644.58
The ABB PDLG2420 is a purpose-designed IP40 glazed enclosure door with a 12 DIN designation for ABB System pro E Power modular low-voltage distribution switchboards. Identified by manufacturer order code 1STQ007337A0000, this enclosure accessory is specified for compatible electrical cabinet configurations with a nominal 2000 mm height and 600 mm width.
Designed for professional electrical switchboard construction, the PDLG2420 combines a glazed viewing arrangement with an IP40 protection classification. The glazed section enables visual observation of equipment positioned behind the door without routinely opening the enclosure, supporting convenient inspection of visible device indications and the internal equipment arrangement.
As part of the ABB System pro E Power modular enclosure platform, this glazed door supports coordinated cabinet assembly for industrial and commercial low-voltage electrical distribution applications. Its 2000 mm high and 600 mm wide configuration makes it suitable for corresponding full-height switchboard sections, while the 12 DIN designation identifies the associated modular distribution arrangement.
The ABB PDLG2420 glazed door provides a dedicated protective access component for compatible System pro E Power low-voltage switchboard enclosures. Correct door selection is important in modular cabinet construction because the door must correspond to the intended enclosure dimensions, access arrangement and environmental protection requirements.
The specified IP40 classification indicates protection against access and ingress by solid objects of 1 mm diameter or greater under the applicable IEC 60529 classification. The second digit, zero, indicates that no water-ingress protection is specified by this rating. Consequently, an IP40 enclosure arrangement should not be treated as equivalent to an IP54 or IP65 configuration where additional environmental protection is required.
The glazed viewing arrangement offers a practical benefit for electrical distribution installations where visible equipment indications need to be inspected. Depending on the internal cabinet layout, operators and maintenance personnel may be able to observe circuit breaker positions, status indicators or other visible equipment features without opening the enclosure. Actual visibility depends on the location of the installed components behind the glazed section.
With a nominal 2000 mm height and 600 mm width, the PDLG2420 is intended for corresponding full-height switchboard cabinet configurations. These dimensions are important selection criteria because enclosure doors designed for different cabinet widths or heights should not be assumed interchangeable, even when they belong to the same ABB product range.
The manufacturer's 12 DIN designation identifies the corresponding modular distribution configuration associated with this door. It does not establish that DIN-rail devices, mounting rails, circuit breakers or other electrical equipment are included. The internal distribution layout, protective devices and mounting accessories must be specified separately according to the switchboard design.
The PDLG2420 should be installed using the applicable ABB System pro E Power assembly instructions and compatible cabinet components. Door alignment, associated mounting hardware and the overall enclosure construction are relevant to achieving the intended mechanical performance and protection characteristics of the finished installation. The exact accessory requirements depend on the selected cabinet configuration.
ABB System pro E Power supports the construction of low-voltage distribution assemblies designed and verified in accordance with applicable IEC 61439 requirements. The PDLG2420 is an enclosure accessory rather than a complete electrical distribution assembly. Final compliance, electrical safety, structural integrity and environmental protection depend on the complete switchboard design, verification and installation.
By combining an IP40 door designation, a glazed viewing arrangement and compatibility with corresponding 2000 × 600 mm System pro E Power cabinet configurations, the ABB PDLG2420 provides a practical solution for professional low-voltage power distribution enclosure construction.
| Product range | System pro E Power |
|---|---|
| ABB order code | 1STQ007337A0000 |
| Manufacturer designation | IP40 GL.DOOR 12 DIN H=2000MM W=600MM |
| Product type | Glazed switchboard enclosure door |
| Product category | Low-voltage switchboard enclosure accessories |
| Specified IP classification | IP40 |
| Door configuration | Glazed |
| DIN designation | 12 DIN |
| Nominal height | 2000 mm |
| Nominal width | 600 mm |
| Compatible enclosure system | ABB System pro E Power |
| Application | Modular low-voltage electrical distribution switchboards |
| Functional purpose | Protective cabinet access door with glazed viewing arrangement |
| Installation type | Mechanical integration into compatible ABB switchboard enclosure structures |
The ABB PDLG2420 is an IP40-designated glazed enclosure door for compatible ABB System pro E Power modular low-voltage switchboards. It provides protective cabinet access while allowing visual observation of equipment positioned behind the glazed section.
The PDLG2420 is specified for a nominal cabinet height of 2000 mm and width of 600 mm. These dimensions identify the intended compatible enclosure configuration.
The manufacturer's designation specifies IP40. This classification provides protection against solid objects of 1 mm diameter or greater but does not specify protection against water ingress. The completed enclosure must be correctly assembled to achieve its intended protection level.
A glazed door incorporates a viewing section that allows equipment inside the cabinet to be observed without routinely opening the enclosure. The visibility of individual devices depends on their position and the internal cabinet arrangement.
The 12 DIN marking is the manufacturer's designation for the corresponding modular distribution configuration. It does not mean that the door includes 12 DIN-rail devices or independently determines the complete internal equipment layout.
The PDLG2420 belongs to the ABB System pro E Power modular low-voltage switchboard range and is intended for compatible cabinet structures with a nominal height of 2000 mm and width of 600 mm.
The PDLG2420 is identified as a glazed enclosure door, not a complete electrical distribution board. Circuit breakers, DIN rails, mounting components and other internal electrical equipment must be selected separately for the switchboard installation.
The PDLG2420 has an IP40 designation, which does not specify protection against water ingress. It should not be assumed suitable for exposed outdoor installations without an appropriately designed and protected enclosure arrangement.
Both products are IP40 glazed doors within the ABB System pro E Power range and have a nominal height of 2000 mm with a 12 DIN designation. The PDLG2420 is specified for a cabinet width of 600 mm, whereas the PDLG2040 is specified for a cabinet width of 400 mm. The correct model should be selected according to the intended enclosure dimensions.
The manufacturer's order code is 1STQ007337A0000, identifying the ABB PDLG2420 IP40 glazed door with a 12 DIN designation for compatible 2000 mm high and 600 mm wide System pro E Power switchboard enclosures.
ABB System pro E Power enclosure accessories provide electrical engineers, switchboard manufacturers and panel builders with coordinated modular components for low-voltage distribution cabinet construction, supporting appropriate equipment access, protective enclosure design and practical integration into industrial and commercial electrical infrastructure.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.