Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLG2040 System pro E Power IP40 glazed enclosure door with a 12 DIN designation for compatible modular low-voltage switchboard cabinets measuring 2000 mm high and 400 mm wide.
£337.42
The ABB PDLG2040 is a purpose-designed IP40 glazed enclosure door with a 12 DIN designation for ABB System pro E Power modular low-voltage distribution switchboards. Identified by manufacturer order code 1STQ007336A0000, this enclosure accessory is specified for compatible electrical cabinet configurations with a nominal 2000 mm height and 400 mm width.
Designed for professional electrical switchboard construction, the PDLG2040 combines a glazed viewing arrangement with an IP40 protection classification. The glazed section supports visual observation of equipment positioned behind the door without routinely opening the enclosure, making it a practical choice for distribution installations where accessible equipment visibility and coordinated cabinet protection are important.
As part of the ABB System pro E Power modular enclosure platform, this glazed door supports the assembly of compatible industrial and commercial low-voltage switchboards. Its 2000 × 400 mm nominal configuration is particularly relevant to tall, narrow cabinet sections, while the 12 DIN designation identifies the corresponding modular distribution arrangement.
The ABB PDLG2040 glazed door provides a dedicated protective access component for compatible System pro E Power low-voltage switchboard enclosures. Correct door selection is an important consideration in modular cabinet construction, helping ensure that the enclosure configuration provides the intended access arrangement and supports the required degree of protection for the completed installation.
The IP40 classification specified for the PDLG2040 indicates protection against access and ingress by solid objects of 1 mm diameter or greater under the applicable IEC 60529 classification. The second digit, zero, means that no water-ingress protection is specified by this rating. Consequently, an IP40 configuration should not be treated as equivalent to an IP54 or IP65 enclosure arrangement.
The glazed viewing arrangement offers a practical benefit for electrical distribution installations where visible equipment indications need to be observed. Depending on the internal cabinet layout, operators and maintenance personnel may be able to inspect device positions, indicators or other visible features without opening the enclosure. Actual visibility depends on the location of the equipment behind the glazed section.
With a nominal 2000 mm height and 400 mm width, the PDLG2040 is intended for a tall, narrow cabinet configuration. These dimensions are essential when selecting the correct enclosure accessory because doors designed for different cabinet widths or heights should not be assumed to be interchangeable.
The manufacturer's 12 DIN designation identifies the corresponding modular distribution configuration associated with this door. It does not establish that DIN-rail devices, mounting rails, circuit breakers or other electrical equipment are supplied with the product. Internal components and mounting arrangements must be specified separately according to the switchboard design.
The ABB System pro E Power platform supports the construction of low-voltage distribution assemblies designed and verified in accordance with applicable IEC 61439 requirements. The PDLG2040 is an enclosure accessory rather than a complete electrical distribution assembly. The structural integrity, electrical safety and required degree of protection of the finished switchboard depend on the complete enclosure configuration and correct installation.
By combining an IP40 door designation, a glazed viewing arrangement and compatibility with corresponding 2000 × 400 mm System pro E Power cabinet configurations, the ABB PDLG2040 provides a practical enclosure door solution for professional low-voltage power distribution projects.
| Product range | System pro E Power |
|---|---|
| ABB order code | 1STQ007336A0000 |
| Manufacturer designation | IP40 GL.DOOR 12 DIN H=2000MM W=400MM |
| Product type | Glazed switchboard enclosure door |
| Product category | Low-voltage switchboard enclosure accessories |
| Specified IP classification | IP40 |
| Door configuration | Glazed |
| DIN designation | 12 DIN |
| Nominal height | 2000 mm |
| Nominal width | 400 mm |
| Compatible enclosure system | ABB System pro E Power |
| Application | Modular low-voltage distribution switchboards |
| Functional purpose | Protective enclosure access door with glazed viewing arrangement |
| Installation type | Integration into compatible ABB switchboard enclosure structures |
The ABB PDLG2040 is an IP40-designated glazed enclosure door for compatible ABB System pro E Power modular low-voltage switchboards. It provides protective cabinet access while allowing visual inspection of equipment positioned behind the glazed section.
The PDLG2040 is specified for a nominal cabinet height of 2000 mm and width of 400 mm. These dimensions identify the intended compatible enclosure configuration.
The manufacturer's designation specifies IP40. This classification provides protection against solid objects of 1 mm diameter or greater but does not specify protection against water ingress. The completed enclosure must be correctly assembled to achieve its intended protection level.
A glazed door incorporates a viewing section that allows equipment inside the cabinet to be observed without routinely opening the enclosure. The visibility of individual devices depends on their position and the internal cabinet arrangement.
The 12 DIN marking is the manufacturer's designation for the corresponding modular distribution configuration. It does not mean that the door includes 12 DIN-rail devices or independently determines the complete internal equipment layout.
The PDLG2040 belongs to the ABB System pro E Power modular low-voltage switchboard range and is intended for compatible cabinet structures with a nominal height of 2000 mm and width of 400 mm.
No electrical protection devices are identified as part of the PDLG2040 door specification. The product is a glazed enclosure door; circuit breakers, DIN rails and other internal equipment must be selected separately for the switchboard installation.
The PDLG2040 has an IP40 designation, which does not specify protection against water ingress. It should not be assumed suitable for exposed outdoor installations without an appropriately designed and protected enclosure arrangement.
Both products are glazed doors for compatible ABB System pro E Power cabinets measuring 2000 mm high and 400 mm wide, with a 12 DIN designation. The PDLG2040 is specified as IP40, whereas the PDLG2046 is specified as IP65. The appropriate model should be selected according to the required enclosure protection and compatible cabinet configuration.
The manufacturer's order code is 1STQ007336A0000, identifying the ABB PDLG2040 IP40 glazed door with a 12 DIN designation for compatible 2000 mm high and 400 mm wide System pro E Power switchboard enclosures.
ABB System pro E Power enclosure accessories provide electrical engineers, switchboard manufacturers and panel builders with coordinated modular components for low-voltage distribution cabinet construction, supporting appropriate equipment access, protective enclosure design and practical integration into industrial and commercial electrical infrastructure.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.