Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLG2042 IP65 glazed switchboard door, order code 1STQ007315A0000, designed for compatible 2000 mm-high and 600 mm-wide System pro E power electrical distribution cabinets with a 12 DIN configuration.
£695.49
The ABB PDLG2042, manufacturer order code 1STQ007315A0000, is an IP65 glazed door designed for compatible ABB System pro E power low-voltage electrical distribution switchboards. The manufacturer specifies a door configuration for 12 DIN, with a nominal cabinet height of 2000 mm and width of 600 mm.
As part of the ABB System pro E power modular switchboard range, the PDLG2042 provides a glazed front-door solution for electrical enclosures requiring visual access to installed equipment. Its glazed design allows operators and maintenance personnel to inspect visible components and indicators without routinely opening the cabinet, subject to the arrangement of equipment behind the door.
The ABB PDLG2042 IP65 glazed door combines a manufacturer-specified protection classification with compatibility for 2000 mm-high × 600 mm-wide cabinet configurations. Designed for professional switchboard construction, it supports coordinated enclosure assembly where a glazed door and the specified 12 DIN configuration are required.
The ABB System pro E power range provides a modular platform for constructing low-voltage electrical distribution switchboards. Its coordinated enclosure structures, doors and installation accessories allow electrical panel builders to configure assemblies for different power distribution and equipment-access requirements.
The ABB PDLG2042 is designed for a compatible cabinet configuration with a nominal height of 2000 mm and width of 600 mm. These measurements identify the intended enclosure size and should not automatically be interpreted as the exact external dimensions of the door itself.
The glazed door configuration provides a viewing area through which suitably positioned internal components may be observed. This can be useful where operators need to check visible device positions, status indicators or instrument displays without opening the switchboard door. The extent of visibility depends on the equipment layout and the glazing arrangement.
The IP65 classification describes protection against dust ingress and water jets under the applicable enclosure protection conditions. The completed switchboard must use the correct door mounting arrangement, seals, enclosure components and cable-entry provisions to achieve its intended protection rating. The door's designation alone does not establish the protection rating of an incomplete or incorrectly assembled cabinet.
The manufacturer's 12 DIN designation identifies the specified DIN configuration for this product. The exact internal layout, usable mounting space and compatibility with individual DIN-mounted devices depend on the associated ABB System pro E power assembly components and should be confirmed using the relevant technical documentation.
When selecting the PDLG2042, electrical panel builders should verify the compatible cabinet structure, door mounting components, sealing requirements and internal equipment arrangement. The inclusion of hinges, locks, keys, gaskets or other supplementary accessories should be confirmed against the applicable ABB bill of materials rather than assumed from the door description.
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ007315A0000 |
| Manufacturer description | IP65 GL.DOOR 12 DIN H=2000MM W=600MM |
| Product type | Glazed switchboard enclosure door |
| Specified protection classification | IP65 |
| Door configuration | Glazed |
| DIN configuration | 12 DIN |
| Compatible cabinet height | 2000 mm |
| Compatible cabinet width | 600 mm |
| Compatible enclosure system | ABB System pro E power |
| Application | Low-voltage electrical switchboard enclosure assembly |
| Product category | Electrical Enclosure Doors and Accessories |
| ABB product group | System Pro E Power |
The ABB PDLG2042 is an IP65-designated glazed enclosure door for compatible ABB System pro E power low-voltage electrical switchboards, specified for a 2000 mm-high and 600 mm-wide cabinet configuration with 12 DIN.
The PDLG2042 is specified for compatible System pro E power cabinets with a nominal 2000 mm height and 600 mm width. These are the intended cabinet dimensions rather than necessarily the exact external door measurements.
12 DIN is the manufacturer's specified DIN configuration for the PDLG2042. The exact internal equipment arrangement and usable mounting capacity should be checked against the relevant ABB System pro E power assembly documentation.
A glazed door provides visibility of suitably positioned internal electrical equipment, allowing operators to inspect visible indicators or device positions without routinely opening the enclosure.
The PDLG2042 is specified for an IP65 enclosure configuration. The protection rating of the completed switchboard depends on correct installation with compatible sealing, door mounting and enclosure components.
The supplied manufacturer description identifies an IP65 glazed door but does not establish the inclusion of individual hinges, locks, keys or other accessories. The exact supplied contents should be checked against the applicable ABB bill of materials.
The manufacturer order code for the ABB PDLG2042 IP65 glazed door, 12 DIN, 2000 mm high and 600 mm wide, is 1STQ007315A0000.
ABB System pro E power enclosure accessories support professional low-voltage electrical distribution assemblies. The ABB PDLG2042 IP65 glazed door provides a coordinated viewing-door solution for compatible 2000 mm-high and 600 mm-wide switchboard cabinets with a 12 DIN configuration, supporting equipment visibility and modular enclosure integration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.