Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLG2046 System pro E Power IP65 glazed enclosure door with a 12 DIN designation for compatible modular low-voltage switchboard cabinets measuring 2000 mm high and 400 mm wide.
£388.10
The ABB PDLG2046 is a purpose-designed IP65 glazed enclosure door with a 12 DIN designation for ABB System pro E Power modular low-voltage distribution switchboards. Identified by manufacturer order code 1STQ007314A0000, this enclosure accessory is specified for compatible electrical cabinet configurations with a nominal 2000 mm height and 400 mm width.
Developed for professional electrical switchboard construction, the PDLG2046 combines a glazed viewing arrangement with an IP65 protection classification. The glazed design allows visual inspection of equipment positioned behind the door without routinely opening the enclosure, supporting convenient observation of compatible electrical distribution devices and visible equipment indications.
As part of the ABB System pro E Power modular enclosure platform, this glazed door supports coordinated cabinet assembly for industrial and commercial low-voltage distribution applications. Its 2000 × 400 mm nominal configuration is particularly relevant to compatible tall, narrow switchboard sections where a protective access door and visual equipment inspection are required.
The ABB PDLG2046 glazed door provides a dedicated protective access component for compatible System pro E Power low-voltage switchboard enclosures. Correct door selection is an important consideration in modular cabinet construction, helping ensure that the enclosure configuration provides the intended access arrangement and supports the environmental protection requirements of the completed installation.
The IP65 classification specified for the PDLG2046 indicates a protection level associated with dust-tight construction and resistance to water jets under the applicable IP test conditions. The finished switchboard can only achieve its intended degree of protection when the door is correctly installed with the appropriate enclosure structure, seals, panels and cable entry arrangements.
The glazed viewing arrangement offers a practical benefit for electrical distribution applications where equipment status or visible indications need to be checked. Depending on the internal equipment layout, operators and maintenance personnel may be able to observe device positions or indicators without opening the enclosure. The actual visibility of individual components depends on their positioning behind the glazed section.
With a nominal 2000 mm height and 400 mm width, the PDLG2046 is intended for a tall, narrow cabinet configuration. These dimensions are essential selection criteria because enclosure doors intended for different widths or heights should not be assumed to be interchangeable.
The manufacturer's 12 DIN designation identifies the corresponding modular configuration associated with this door. It should not be interpreted as confirmation that DIN-rail devices, mounting rails, protective circuit breakers or other electrical equipment are supplied with the product. The complete internal equipment arrangement must be designed and specified separately.
ABB System pro E Power supports the construction of low-voltage distribution assemblies designed and verified in accordance with applicable IEC 61439 requirements. The PDLG2046 is a mechanical enclosure accessory rather than a complete switchboard or independently verified electrical distribution assembly. Final compliance, electrical safety and environmental protection depend on the complete cabinet design and installation.
By combining an IP65 door designation, a glazed viewing arrangement and compatibility with corresponding 2000 × 400 mm System pro E Power cabinet configurations, the ABB PDLG2046 provides a practical solution for professional electrical distribution enclosure construction.
| Product range | System pro E Power |
|---|---|
| ABB order code | 1STQ007314A0000 |
| Manufacturer designation | IP65 GL.DOOR 12 DIN H=2000MM W=400MM |
| Product type | Glazed switchboard enclosure door |
| Product category | Low-voltage switchboard enclosure accessories |
| Specified IP classification | IP65 |
| Door configuration | Glazed |
| DIN designation | 12 DIN |
| Nominal height | 2000 mm |
| Nominal width | 400 mm |
| Compatible enclosure system | ABB System pro E Power |
| Application | Modular low-voltage distribution switchboards |
| Functional purpose | Protective enclosure access door with glazed viewing arrangement |
| Installation type | Integration into compatible ABB switchboard enclosure structures |
The ABB PDLG2046 is an IP65-designated glazed enclosure door for compatible ABB System pro E Power modular low-voltage switchboards. It provides protective cabinet access while allowing visual inspection of equipment positioned behind the glazed section.
The PDLG2046 is specified for a nominal cabinet height of 2000 mm and width of 400 mm. These dimensions identify the intended compatible enclosure configuration.
The manufacturer's designation specifies IP65, indicating dust-tight protection and resistance to water jets under defined test conditions. The protection rating of the completed switchboard depends on correct installation with compatible enclosure components and sealing arrangements.
A glazed door incorporates a viewing section that allows equipment inside the cabinet to be observed without routinely opening the enclosure. The visibility of individual devices depends on their position and the internal cabinet arrangement.
The 12 DIN marking is the manufacturer's designation for the corresponding modular distribution configuration. It does not mean that the door includes 12 DIN-rail devices or that it independently determines the complete equipment layout.
The PDLG2046 belongs to the ABB System pro E Power modular low-voltage switchboard range and is intended for compatible cabinet structures with a nominal height of 2000 mm and width of 400 mm.
No electrical protection devices are identified as part of the PDLG2046 door specification. The product is a glazed enclosure door, while circuit breakers, DIN rails and other internal equipment must be selected separately for the switchboard installation.
The PDLG2046 is specified as an IP65 door configuration. The completed enclosure must incorporate the appropriate compatible cabinet structure, seals, panels and cable entry arrangements, installed according to ABB instructions, to achieve the intended overall protection level.
Both products are IP65 glazed doors within the ABB System pro E Power range. The PDLG2046 is specified for a 2000 mm high, 400 mm wide cabinet with a 12 DIN designation, while the PDLG1816 is specified for an 1800 mm high, 1000 mm wide cabinet with a 48 DIN designation.
The manufacturer's order code is 1STQ007314A0000, identifying the ABB PDLG2046 IP65 glazed door with a 12 DIN designation for compatible 2000 mm high and 400 mm wide System pro E Power switchboard enclosures.
ABB System pro E Power enclosure accessories provide electrical engineers, switchboard manufacturers and panel builders with coordinated modular components for low-voltage distribution cabinet construction, supporting protective enclosure design, practical equipment visibility and professional integration into industrial and commercial electrical infrastructure.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.