Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLG1866 (1STQ007305A0000) System pro E Power IP65 glazed steel enclosure door for 1800 x 600 mm modular distribution cabinets, featuring a 24 DIN configuration, transparent viewing panel and reversible hinged installation.
£617.55
The ABB PDLG1866 (1STQ007305A0000) is a purpose-designed IP65 glazed enclosure door for the ABB System pro E Power modular switchboard range. Designed for compatible electrical distribution cabinets with a nominal height of 1800 mm and width of 600 mm, this door combines protected enclosure access with visibility of installed electrical equipment.
As part of the ABB System pro E Power series, the PDLG1866 is intended for professional low-voltage switchboard construction and electrical distribution applications. Its glazed design allows operators and maintenance personnel to inspect visible equipment, indicators and component status without routinely opening the cabinet. The door is specified for IP65 enclosure applications, helping support protection against dust and water jets when installed as part of a correctly assembled and suitably rated enclosure.
With a nominal height of 1800 mm, width of 600 mm and a 24 DIN module arrangement identified in the manufacturer's description, the ABB PDLG1866 is suited to tall modular distribution cabinets. It offers a practical enclosure solution for industrial facilities, commercial electrical installations and professional switchboard assemblies requiring equipment visibility and protected access.
The ABB PDLG1866 IP65 glazed door is designed to provide a protective front closure for compatible System pro E Power switchboard structures while allowing visual inspection of installed equipment. A glazed enclosure door can be particularly useful where electrical indicators, meters or device status information need to remain visible during normal operation.
The IP65 classification denotes protection against dust ingress and water jets under the applicable test conditions. Achieving this protection level in service depends on the complete enclosure assembly, including the correct door, seals, frame and installation arrangements. The PDLG1866 is designed for 1800 × 600 mm nominal cabinet configurations within the ABB System pro E Power range, helping electrical panel builders create consistent, professionally assembled low-voltage distribution systems.
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ007305A0000 |
| Product type | Glazed electrical enclosure door |
| Manufacturer description | IP65 GL.DOOR 24 DIN H=1800MM W=600MM |
| Protection rating | IP65 |
| Nominal enclosure height | 1800 mm |
| Nominal enclosure width | 600 mm |
| Nominal enclosure dimensions (H × W) | 1800 × 600 mm |
| DIN configuration | 24 DIN |
| Door type | Glazed / transparent viewing door |
| Installation position | Front of compatible electrical enclosure |
| Compatible product range | ABB System pro E Power |
| Enclosure system | Modular low-voltage switchboard system |
| Application | Electrical distribution cabinet protection and access |
| Component category | Switchboard door / enclosure accessory |
| Installation method | Integration into a compatible modular enclosure assembly |
The ABB PDLG1866 is an IP65 glazed door designed for compatible ABB System pro E Power electrical distribution enclosures. It provides a protective front closure while allowing visual inspection of equipment installed inside the switchboard.
The PDLG1866 is designed for compatible System pro E Power enclosures with a nominal 1800 mm height and 600 mm width. These are the specified cabinet dimensions rather than confirmed external measurements of the individual door.
IP65 indicates protection against dust ingress and water jets when the door is correctly installed in a compatible enclosure assembly. The completed switchboard must be assembled in accordance with ABB's instructions to achieve its intended protection rating.
The manufacturer identifies the PDLG1866 as a 24 DIN glazed door. This designation relates to its intended DIN modular switchboard configuration and should not be interpreted as the total number of individual electrical devices that can be installed inside the cabinet.
Yes. The glazed door design allows visual inspection of equipment, indicators and meters positioned within the viewing area. This can reduce the need to open the enclosure for routine visual checks, although access is still required for maintenance and electrical work.
ABB System pro E Power enclosure components support flexible and professional low-voltage switchboard construction. The PDLG1866 IP65 glazed door provides a purpose-designed solution for compatible 1800 × 600 mm distribution cabinets, combining protected enclosure access with convenient visibility of installed electrical equipment.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.