Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB PDLG1842 1STQ007304A0000 is an IP65-designated glass door accessory for compatible System Pro E Power low-voltage switchgear enclosures, specified for a 12 DIN configuration with a nominal height of 1800 mm and width of 600 mm.
£609.75
The ABB PDLG1842 IP65 Glass Door (1STQ007304A0000) is a dedicated enclosure door accessory for compatible ABB System Pro E Power low-voltage switchgear assemblies. Identified by the manufacturer's description IP65 GL.DOOR 12 DIN H=1800MM W=600MM, this product is specified for an enclosure arrangement with a nominal height of 1800 mm, a nominal width of 600 mm and a 12 DIN configuration designation.
Designed for use within the ABB System Pro E Power range, the PDLG1842 provides a manufacturer-identified glass door solution for compatible electrical distribution switchboards. A glass door arrangement can provide visibility into designated areas of an electrical enclosure while forming part of the cabinet's protective outer construction.
The manufacturer's IP65 designation identifies the enclosure protection configuration for which this door is intended. IP65 is associated with dust-tight construction and protection against water jets under the applicable test conditions. The completed switchgear assembly must incorporate the correct frame, door seals, closing arrangements and associated components to achieve its declared ingress protection rating.
The 12 DIN designation is an important configuration identifier within the manufacturer's product description. It should be matched to the appropriate System Pro E Power enclosure layout rather than interpreted as confirmation of the number of DIN-rail modules, rows or devices without reference to ABB's technical documentation.
With product reference PDLG1842 and ABB order code 1STQ007304A0000, this glass door accessory supports accurate selection for new switchboard construction, enclosure refurbishment and manufacturer-approved replacement projects. Its specified dimensions and protection configuration make correct compatibility checks essential before ordering or installation.
The ABB System Pro E Power range provides modular enclosure solutions for constructing low-voltage electrical distribution switchboards. These assemblies may incorporate structural frames, doors, side panels, internal mounting systems, busbar arrangements and protective equipment selected according to the requirements of the completed electrical installation.
An enclosure door forms part of the outer construction of an electrical switchboard. Its selection must account for the cabinet dimensions, opening arrangement, mechanical interfaces, required access provisions and specified protection configuration. A correctly selected door must be compatible with the associated frame and enclosure components.
The ABB PDLG1842 is identified as a glass door. Glass door arrangements can allow visual inspection of designated internal areas without requiring the door to be opened. However, the extent of visibility depends on the actual glazing area, the internal switchboard layout and any components positioned behind the door.
The manufacturer's description specifies IP65. Under the ingress protection classification system defined by BS EN 60529, the first digit 6 indicates protection against dust ingress, while the second digit 5 indicates protection against water jets under the applicable test conditions.
Although the PDLG1842 is designated for an IP65 enclosure configuration, the door does not independently establish the ingress protection rating of the complete switchboard. The final protection level depends on the complete enclosure arrangement, including the door-to-frame interface, sealing system, hinges, closing mechanism, adjoining panels and any cable-entry openings.
The manufacturer's H=1800MM designation identifies a nominal height of 1800 mm, while W=600MM identifies a nominal width of 600 mm. These measurements are important for selecting the appropriate door configuration. They should not automatically be treated as the exact external dimensions of the door leaf, glass area or mounting frame.
The 12 DIN designation forms part of the ABB product description and should be retained when identifying the correct accessory. Although DIN terminology is widely used in electrical distribution equipment, the exact meaning of this designation in the PDLG1842 configuration must be confirmed using ABB's System Pro E Power catalogue and technical drawings.
Door compatibility involves more than matching nominal height and width. The correct arrangement may depend on the enclosure frame, hinge position, opening direction, locking system, seals and internal equipment clearances. The PDLG1842 should therefore be selected using the complete manufacturer-specified assembly configuration.
The supplied product description does not establish the exact glass composition, glazing thickness, frame material, surface finish, hinge arrangement, lock type or package contents. These characteristics should be verified using the applicable ABB technical and supply documentation rather than assumed from the product designation.
Low-voltage switchgear and controlgear assemblies may be designed and verified in accordance with BS EN IEC 61439. Relevant considerations include mechanical operation, accessibility, protection against electric shock, enclosure integrity and the requirements of the completed electrical assembly. Installing a compatible glass door is one element of the overall verified switchgear construction.
For new installations or replacement work, confirm the PDLG1842 product reference, ABB order code 1STQ007304A0000, IP65 designation, 12 DIN configuration, nominal 1800 mm height and 600 mm width against the relevant ABB System Pro E Power assembly drawings and parts list.
The ABB PDLG1842 is an IP65-designated glass door accessory for compatible ABB System Pro E Power low-voltage switchgear enclosures. It is specified for a 12 DIN configuration with a nominal height of 1800 mm and width of 600 mm.
The ABB order code is 1STQ007304A0000. The product reference is PDLG1842, and it belongs to the ABB System Pro E Power product group.
IP65 identifies an enclosure protection classification associated with dust-tight construction and protection against water jets under the applicable test conditions. The completed switchgear enclosure must be correctly assembled and verified to achieve its declared IP65 rating.
GL.DOOR identifies the product as a glass door. The exact glazing construction, frame design and associated hardware should be confirmed using ABB's technical documentation.
12 DIN is a manufacturer configuration designation included in the product description. Its precise meaning for this door and the associated enclosure arrangement should be confirmed against the relevant ABB System Pro E Power catalogue and assembly drawings.
H=1800MM identifies a nominal height of 1800 mm for the intended enclosure configuration. It does not necessarily establish the exact external height of the door leaf or the dimensions of the glass viewing area.
W=600MM identifies a nominal width of 600 mm. The actual door dimensions, hinge positions and fixing geometry should be checked against the applicable ABB technical drawings.
The PDLG1842 belongs to the ABB System Pro E Power range. It should be used only with enclosure configurations that specify this reference and match the required IP65, 12 DIN, 1800 mm height and 600 mm width designations.
No. The ABB PDLG1842 is a glass door accessory specified for an IP65 enclosure arrangement. The declared protection rating depends on the complete enclosure construction, including the frame, door seals, closing system, adjoining panels and any openings.
The supplied manufacturer description does not confirm whether hinges, locks, handles, gaskets or fixing hardware are included. Check the relevant ABB supply documentation and enclosure parts list to identify the exact contents and any separately required accessories.
Confirm the ABB order code 1STQ007304A0000, product reference PDLG1842, IP65 designation, glass door configuration, 12 DIN designation, nominal 1800 mm height and 600 mm width. Verify the compatible enclosure frame, mounting arrangement, door hardware and sealing requirements using ABB's System Pro E Power documentation.
ABB System Pro E Power enclosure accessories support the construction, maintenance and refurbishment of professionally engineered low-voltage electrical distribution switchboards. The ABB PDLG1842 IP65 Glass Door provides a manufacturer-identified accessory for compatible 12 DIN enclosure arrangements with a nominal height of 1800 mm and width of 600 mm, helping panel builders and maintenance engineers select the appropriate door for their specified switchgear configuration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.