1STQ007231B0000 ABB Six Steel Tie Rods L<45 mm System Pro E Power

Why Choose the ABB 1STQ007231B0000 Steel Tie Rod Kit?

The ABB 1STQ007231B0000 is a six-piece steel tie rod accessory kit from the ABB System Pro E Power range, intended for use in compatible modular low-voltage switchboard assemblies. Identified by the manufacturer as 6 STEEL TIE RODS L<45[MM], this product provides a defined set of steel tie rods for suitable mechanical assembly and fastening arrangements within the ABB enclosure system.

The manufacturer's designation specifies a quantity of six steel tie rods and a length condition of less than 45 mm. This distinction is important when selecting mechanical accessories because tie rod dimensions, fixing interfaces and assembly positions must match the requirements of the intended switchboard configuration. The designation does not establish an exact individual rod length or confirm thread dimensions, end fittings or tensile capacity.

As part of the ABB System Pro E Power product group, the 1STQ007231B0000 supports coordinated selection of original ABB mechanical accessories for professional electrical panel construction. It is relevant to switchboard manufacturers, panel builders and maintenance engineers who need the specified six-piece steel tie rod kit for an ABB-approved assembly arrangement.

Key Advantages

• Original ABB System Pro E Power accessory for compatible modular switchboard assemblies.
• Six steel tie rods identified in the manufacturer's product designation.
• Length designation below 45 mm for the specified tie rod configuration.
• Steel construction as explicitly identified by ABB.
• Supports appropriate mechanical fastening and assembly arrangements in compatible switchboard structures.
• Provides a defined manufacturer reference for selecting matching mechanical components.
• Helps distinguish the specified short tie rod arrangement from accessories with different dimensions.
• Suitable for professional switchboard assembly and compatible maintenance work.
• Supports coordinated integration with applicable ABB System Pro E Power components.
• ABB order code 1STQ007231B0000 enables accurate identification, ordering and replacement selection.

Key Features

• ABB System Pro E Power modular switchboard accessory.
• Six-piece tie rod kit according to the manufacturer designation.
• Steel tie rod construction.
• L<45[MM] manufacturer length designation.
• Specified length condition of less than 45 mm.
• Designed for compatible mechanical assembly applications.
• Applicable to approved System Pro E Power switchboard configurations.
• Supports the selection of manufacturer-designated fastening components.
• Distinct from general-purpose threaded rods without confirmed ABB compatibility.
• Intended for professional electrical enclosure assembly and maintenance.
• Exact fixing interfaces and installation positions are subject to ABB technical documentation.
• ABB manufacturer reference 1STQ007231B0000 for product identification.

Steel Tie Rod Selection and Mechanical Integration in System Pro E Power

The ABB 1STQ007231B0000 is identified as a set of six steel tie rods for the System Pro E Power product group. Tie rods are mechanical components that can be used in fastening, retention or connection arrangements where the assembly design specifies them. Their precise function in a particular switchboard configuration must be established from the relevant ABB installation instructions.

The quantity of six is an important product-selection characteristic. It identifies the manufacturer-designated set size, allowing panel builders to distinguish this accessory from individual tie rods or alternative kits. The supplied description does not, however, establish whether all six rods are required for one complete assembly or whether they are distributed across multiple fixing positions.

The L<45[MM] notation is equally important. It specifies a length condition of less than 45 mm rather than an exact nominal rod length. Engineers should retain this distinction when comparing the product against technical drawings, bills of materials and existing components.

Because the designation identifies steel, the material is known at a general level. However, it does not specify the steel grade, coating, corrosion resistance or mechanical strength classification. These properties should not be assumed from the material description alone, particularly for installations subject to specific environmental or structural requirements.

Mechanical compatibility depends on more than overall length. The applicable rod diameter, thread specification, end geometry, mating components and installation clearances may all influence suitability. These characteristics are not stated in the supplied product designation and should be verified against ABB's assembly drawings before installation.

When replacing existing switchboard components, the ABB order code 1STQ007231B0000 should be checked against the original equipment documentation. A visually similar tie rod may have different dimensions or fixing characteristics, so appearance alone is not sufficient to establish interchangeability.

Correct installation is particularly important in electrical switchboards because mechanical components must not interfere with live conductors, insulation clearances, protective barriers or moving equipment. The permitted fixing locations and any applicable tightening requirements must follow the relevant ABB instructions.

The supplied manufacturer designation does not identify a particular cabinet width, depth, height, current rating or ingress protection classification. These characteristics belong to the complete switchboard or its other components and should not be attributed to the tie rod kit without supporting technical information.

Similarly, the description does not confirm whether nuts, washers, spacers or other fixing accessories are included. The specified product is a six steel tie rod kit; any additional hardware needed for a particular assembly should be established from ABB's parts list and installation documentation.

For professional panel builders and maintenance teams, using the correct manufacturer-designated tie rod kit supports accurate component identification and controlled assembly practices. The 1STQ007231B0000 reference provides a precise means of specifying the required accessory without relying on approximate dimensions or generic hardware descriptions.

Typical Applications

• Compatible ABB System Pro E Power low-voltage switchboard assemblies.
• Manufacturer-specified mechanical fastening arrangements.
• Modular electrical distribution cabinet construction.
• Professional electrical panel manufacturing.
• Approved enclosure component connection arrangements.
• Switchboard mechanical assembly and maintenance tasks.
• Replacement of matching ABB steel tie rod accessories.
• Industrial electrical distribution assemblies using compatible ABB components.
• Commercial electrical switchboards requiring the designated tie rod kit.
• Electrical enclosure refurbishment where the original specification identifies 1STQ007231B0000.
• Switchboard projects requiring six steel tie rods with the specified L<45[MM] designation.