Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007209A0000 ABB PPIM0200 4 Galvanised Sheet-Metal Intermediate Plinth Components 200 mm
ABB PPIM0200 System pro E Power set of four galvanised sheet-metal intermediate plinth components with a nominal height of 200 mm for compatible modular low-voltage switchboard base assemblies.
£112.43
Why Choose the ABB PPIM0200 Intermediate Plinth Components?
The ABB PPIM0200 is a dedicated set of four galvanised sheet-metal intermediate plinth components for ABB System pro E Power modular low-voltage distribution switchboards. Identified by manufacturer order code 1STQ007209A0000, this enclosure accessory is designed for compatible switchboard plinth arrangements with a nominal height of 200 mm.
As part of the ABB System pro E Power range, the PPIM0200 supports professional electrical cabinet construction by providing purpose-designed intermediate plinth components for integration into compatible enclosure base assemblies. Its galvanised sheet-metal construction offers a protective metallic finish suitable for the intended mechanical application, while the modular design supports coordinated installation with other compatible ABB enclosure components.
The product comprises four galvanised sheet-metal intermediate plinth components specified for 200 mm high plinth arrangements. These components help electrical panel builders configure the lower structural sections of compatible System pro E Power switchboards, supporting organised cabinet assembly and appropriate selection of enclosure accessories for industrial and commercial power distribution installations.
Key Advantages
- Genuine ABB System pro E Power accessory for compatible modular switchboard plinth arrangements.
- Supplied as four galvanised sheet-metal intermediate plinth components.
- 200 mm nominal height for corresponding cabinet base configurations.
- Galvanised sheet-metal construction provides a protective zinc-coated surface.
- Supports coordinated assembly of compatible electrical cabinet plinth structures.
- Designed for integration with the modular ABB System pro E Power enclosure platform.
- Provides an application-specific solution for intermediate plinth construction.
- Supports consistent component selection during electrical switchboard design and assembly.
- Suitable for industrial and commercial low-voltage power distribution installations.
- Designed for professional electrical panel building and compatible enclosure modification projects.
Key Features
- ABB System pro E Power modular switchboard accessory.
- PPIM0200 manufacturer product designation.
- ABB order code 1STQ007209A0000.
- Intermediate plinth components for compatible cabinet base assemblies.
- Quantity: 4 components.
- Material: Galvanised sheet metal.
- Nominal plinth height: 200 mm.
- Designed for compatible electrical cabinet plinth configurations.
- Supports mechanical integration within modular switchboard base arrangements.
- Suitable for low-voltage main distribution switchboard construction.
- Part of the coordinated ABB System pro E Power enclosure accessory range.
- Intended for installation in accordance with applicable ABB assembly instructions.
Reliable Intermediate Plinth Integration for Modular Electrical Switchboards
The ABB PPIM0200 intermediate plinth components provide a dedicated mechanical accessory for compatible System pro E Power switchboard base arrangements. Plinth structures form part of the overall electrical cabinet installation, making correct component selection important when constructing modular enclosures for industrial and commercial power distribution applications.
The ABB System pro E Power range is a modular low-voltage switchboard platform designed to accommodate different electrical distribution requirements. Its coordinated system of enclosure structures, mounting accessories, panels and plinth components enables electrical engineers and panel builders to develop switchboard assemblies suited to the intended equipment configuration and installation environment.
The PPIM0200 consists of four galvanised sheet-metal intermediate plinth components with a nominal height of 200 mm. Galvanised sheet metal provides a protective zinc-coated surface that helps resist corrosion in suitable service conditions. The overall environmental suitability of the completed installation depends on the cabinet configuration, exposure conditions and other selected components.
The 200 mm intermediate plinth configuration is relevant to switchboard installations requiring compatible plinth components of this height. The additional space associated with a raised cabinet base may be useful when planning cable routing, cabinet positioning and access beneath an enclosure, although the actual available space and permitted installation arrangements must be confirmed from the complete ABB plinth assembly design.
Intermediate plinth components should be selected according to the applicable ABB System pro E Power assembly configuration. The PPIM0200 is not identified as a complete standalone cabinet plinth, and additional compatible structural or fixing components may be necessary to construct the finished base assembly.
The product designation confirms the four-piece quantity, galvanised sheet-metal construction and 200 mm nominal height. It does not independently establish cabinet width, cabinet depth, maximum load capacity, fixing dimensions or compatibility with every System pro E Power enclosure configuration.
ABB System pro E Power supports the construction of low-voltage distribution assemblies designed and verified in accordance with applicable IEC 61439 requirements. The PPIM0200 is a mechanical enclosure accessory; the structural performance, electrical safety and required degree of protection of the completed switchboard depend on the overall assembly and correct installation.
By providing a dedicated set of 200 mm galvanised intermediate plinth components, the ABB PPIM0200 supports coordinated cabinet base construction, accurate component selection and professional electrical switchboard integration.
Typical Applications
- ABB System pro E Power modular main distribution switchboards.
- Compatible 200 mm high intermediate plinth assemblies.
- Industrial low-voltage electrical distribution cabinets.
- Commercial building electrical switchboard installations.
- Modular switchgear cabinet base construction.
- Professional electrical panel building and enclosure assembly.
- Manufacturing facility power distribution infrastructure.
- Electrical cabinet installations incorporating compatible raised plinth arrangements.
- Compatible switchboard refurbishment and plinth component replacement.
- Industrial power distribution and modular enclosure integration projects.
Technical Specifications
| Product range | System pro E Power |
|---|---|
| ABB order code | 1STQ007209A0000 |
| Manufacturer designation | 4 GALV.SHEET INTERM. PLINTHS H=200MM |
| Product type | Intermediate plinth components |
| Product category | Electrical switchboard plinth accessories |
| Quantity | 4 |
| Material | Galvanised sheet metal |
| Nominal height | 200 mm |
| Plinth configuration | Intermediate |
| Compatible enclosure system | ABB System pro E Power |
| Application | Modular low-voltage distribution switchboard plinth assemblies |
| Installation type | Mechanical integration into compatible cabinet base arrangements |
| Functional purpose | Intermediate plinth construction and enclosure base integration |
Frequently Asked Questions
What is the ABB PPIM0200 used for?
The ABB PPIM0200 is a set of four galvanised sheet-metal intermediate plinth components designed for compatible ABB System pro E Power modular switchboard base arrangements with a nominal plinth height of 200 mm.
How many components are included in the ABB PPIM0200?
The manufacturer designation specifies four intermediate plinth components made from galvanised sheet metal.
What is the height of the ABB PPIM0200?
The PPIM0200 is specified for a nominal intermediate plinth height of 200 mm.
What material is used for the PPIM0200?
The ABB PPIM0200 components are made from galvanised sheet metal, providing a metallic construction with a protective zinc-coated surface.
What does intermediate plinth mean?
An intermediate plinth component is a structural element used within a compatible electrical cabinet base arrangement. Its precise position and connection to adjoining plinth components depend on the applicable ABB System pro E Power assembly configuration.
Which ABB enclosure system is compatible with the PPIM0200?
The PPIM0200 belongs to the ABB System pro E Power modular low-voltage switchboard enclosure range and is intended for compatible plinth assemblies within that system.
Does the ABB PPIM0200 provide a complete cabinet plinth?
The PPIM0200 is identified as a set of four intermediate plinth components, rather than a complete standalone plinth assembly. Additional compatible structural or fixing components may be required depending on the cabinet configuration.
What is the difference between the ABB PPIM0200 and PPIM0100?
Both products are galvanised sheet-metal intermediate plinth accessories for ABB System pro E Power switchboards. The PPIM0200 comprises four components for a nominal height of 200 mm, whereas the PPIM0100 comprises two components for a nominal height of 100 mm.
Does the PPIM0200 fit every System pro E Power cabinet size?
The product designation confirms the quantity, material and 200 mm nominal height but does not establish universal compatibility with every cabinet width or depth. The intended installation should be checked against the relevant ABB System pro E Power plinth assembly instructions.
What is the ABB order code for the PPIM0200?
The manufacturer's order code is 1STQ007209A0000, identifying the ABB PPIM0200 set of four galvanised sheet-metal intermediate plinth components with a nominal height of 200 mm.
Trusted by Electrical Panel Builders and Power Distribution Professionals
ABB System pro E Power enclosure and plinth accessories provide electrical engineers, switchboard manufacturers and panel builders with coordinated modular components for low-voltage distribution cabinet construction, supporting accurate accessory selection, practical mechanical integration and dependable electrical infrastructure.
