Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007203A0000 ABB PBWP1290 Bottom Kit Without Plinth 1250mm x 900mm
ABB PBWP1290 1STQ007203A0000 is a System Pro E Power bottom enclosure kit for compatible low-voltage switchgear assemblies without a plinth, specified for a nominal enclosure width of 1250 mm and depth of 900 mm.
£203.43
Why Choose the ABB PBWP1290 Bottom Kit Without Plinth – 1250 mm x 900 mm?
The ABB PBWP1290 Bottom Kit Without Plinth (1STQ007203A0000) is a dedicated bottom enclosure accessory for compatible ABB System Pro E Power low-voltage switchgear assemblies. Identified by the manufacturer's description KIT BOT.WITH-OUT PLINTH W1250MM D=900MM, this product is specified for a switchgear enclosure configuration with a nominal width of 1250 mm and depth of 900 mm, where the bottom arrangement is designed without a plinth.
As part of the ABB System Pro E Power range, the PBWP1290 supports the construction of modular electrical distribution switchboards by providing a manufacturer-designated accessory for the lower enclosure assembly. Selecting the correct bottom kit is important because the base arrangement must correspond to the cabinet dimensions, structural configuration and intended installation method.
The defining characteristic of the ABB PBWP1290 is its without-plinth configuration. This distinguishes it from accessories intended for switchboards incorporating a separate plinth or raised base structure. The kit should therefore be selected according to the applicable ABB enclosure drawings rather than assumed to be interchangeable with a plinth-based bottom assembly.
With product reference PBWP1290 and ABB order code 1STQ007203A0000, this accessory provides clear manufacturer identification for professional panel builders, electrical contractors and switchgear maintenance engineers. It is intended for compatible System Pro E Power enclosure arrangements and should be installed using the associated manufacturer-specified components and instructions.
Key Advantages
- Purpose-designed ABB System Pro E Power bottom enclosure kit.
- Specifically identified for a without-plinth installation configuration.
- Specified for a nominal enclosure width of 1250 mm.
- Designed for a nominal enclosure depth of 900 mm.
- Supports the intended lower enclosure arrangement of compatible low-voltage switchboards.
- Helps panel builders select the correct bottom accessory for the specified cabinet configuration.
- Provides a manufacturer-identified alternative to bottom arrangements designed around a separate plinth.
- Supports the construction of compatible modular switchgear enclosures.
- Suitable for professional electrical distribution panel manufacturing and assembly.
- Useful for approved switchgear refurbishment and component replacement projects.
- Clearly identified by ABB order code 1STQ007203A0000.
- Part of the established ABB System Pro E Power low-voltage switchgear enclosure range.
Key Features
- Manufacturer: ABB.
- Product reference: PBWP1290.
- ABB order code: 1STQ007203A0000.
- Manufacturer description: KIT BOT.WITH-OUT PLINTH W1250MM D=900MM.
- Product group: System Pro E Power.
- Component type: Bottom enclosure kit.
- Installation designation: Without plinth.
- Enclosure position: Bottom.
- Nominal enclosure width: 1250 mm.
- Nominal enclosure depth: 900 mm.
- Intended for compatible System Pro E Power switchgear enclosure configurations.
- Supports manufacturer-specified lower enclosure construction.
- Suitable for original switchboard assembly and approved replacement applications.
- Requires confirmation of the associated enclosure frame and installation arrangement.
- Installation should follow the relevant ABB assembly instructions and technical drawings.
Technical Specifications
- Manufacturer: ABB
- Product group: System Pro E Power
- Product reference: PBWP1290
- ABB order code: 1STQ007203A0000
- Product name: ABB PBWP1290 Bottom Kit Without Plinth – 1250 mm x 900 mm
- Manufacturer description: KIT BOT.WITH-OUT PLINTH W1250MM D=900MM
- Product type: Bottom enclosure kit
- Accessory category: Low-voltage switchgear enclosure bottom accessories
- Product family: System Pro E Power
- Installation position: Bottom
- Base configuration: Without plinth
- Nominal enclosure width: 1250 mm
- Nominal enclosure depth: 900 mm
- Primary function: Forming part of the bottom arrangement of a compatible switchgear enclosure without a plinth
- Associated equipment: ABB System Pro E Power low-voltage switchgear enclosures
- Equipment compatibility: System Pro E Power configurations specifying PBWP1290
- Mounting arrangement: According to the applicable ABB enclosure assembly instructions
- Product classification: Switchgear enclosure bottom construction accessory
- Application: Low-voltage electrical distribution switchboard construction and maintenance
Bottom Enclosure Kits Without Plinth in ABB System Pro E Power Switchgear
The ABB System Pro E Power range provides modular enclosure solutions for constructing low-voltage electrical distribution switchboards. These assemblies can incorporate structural frames, doors, side panels, internal mounting systems, busbar arrangements and enclosure accessories selected according to the requirements of the completed electrical installation.
The bottom enclosure arrangement is an important part of the switchboard's mechanical construction. Depending on the selected design, the lower enclosure area may incorporate structural components, covering elements, cable-entry provisions or interfaces with the installation surface. The exact arrangement must follow the manufacturer's approved assembly configuration.
The ABB PBWP1290 is specifically described as a bottom kit without plinth. This identifies its intended use in a compatible enclosure configuration that does not incorporate a separate plinth as part of the specified bottom arrangement. The designation should not be interpreted as confirmation that the kit alone provides every component needed for floor mounting or cabinet support.
In electrical enclosure construction, a plinth is generally a base structure positioned beneath the cabinet. Plinth-based configurations may be selected for particular installation, access or mechanical requirements. A without-plinth arrangement uses a different manufacturer-specified base configuration, and the relevant components must be selected accordingly.
The manufacturer's description specifies W1250MM, identifying a nominal enclosure width of 1250 mm. This is an important selection parameter because the bottom components must correspond to the width of the intended switchgear assembly. It should not automatically be interpreted as the exact physical width of every component supplied in the kit.
The designation D=900MM identifies a nominal enclosure depth of 900 mm. The width and depth parameters should be considered together when selecting the correct bottom kit. A component intended for a 1250 mm by 900 mm configuration should not be assumed to fit a cabinet with different nominal dimensions.
Correct bottom enclosure selection is particularly important where multiple System Pro E Power cabinet sizes and base arrangements are available. The PBWP1290 should be matched to the relevant enclosure frame, lower structural components and any associated mounting accessories identified in the ABB parts list.
The manufacturer's description identifies the product as a kit, but it does not establish the exact number of supplied parts or whether fixing hardware, seals, cable-entry accessories or floor-mounting components are included. These details should be verified against the applicable ABB packaging documentation and assembly instructions before installation.
The ABB PBWP1290 does not independently establish a particular ingress protection rating, load-bearing capacity, mechanical impact rating or floor-anchoring performance. These characteristics depend on the complete enclosure design, the supporting structure and the installation method specified by the manufacturer.
Low-voltage switchgear and controlgear assemblies may be designed and verified in accordance with BS EN IEC 61439. Where an enclosure has a declared ingress protection classification, the applicable principles of BS EN 60529 must also be considered. The completed switchboard must satisfy its relevant requirements as an assembled system.
For new construction or replacement work, confirm the PBWP1290 product reference, ABB order code 1STQ007203A0000, without-plinth designation, nominal 1250 mm width and 900 mm depth against the appropriate System Pro E Power configuration drawings and bill of materials.
Typical Applications
- ABB System Pro E Power low-voltage switchgear enclosures.
- Compatible switchboard bottom arrangements without a plinth.
- Enclosure configurations with a nominal width of 1250 mm.
- Enclosure configurations with a nominal depth of 900 mm.
- Industrial electrical distribution switchboards.
- Commercial building low-voltage electrical panels.
- Main electrical distribution switchgear assemblies.
- Sub-distribution switchboard enclosures.
- Modular electrical cabinet manufacturing.
- OEM electrical panel-building projects.
- System Pro E Power enclosure refurbishment.
- Manufacturer-approved bottom kit replacement and maintenance.
Frequently Asked Questions
What is the ABB PBWP1290 1STQ007203A0000 used for?
The ABB PBWP1290 is a bottom enclosure kit for compatible ABB System Pro E Power low-voltage switchgear assemblies. It is specified for a without-plinth arrangement with a nominal enclosure width of 1250 mm and depth of 900 mm.
What is the ABB order code for the PBWP1290 bottom kit?
The ABB order code is 1STQ007203A0000. The product reference is PBWP1290, and it belongs to the ABB System Pro E Power product group.
What does Without Plinth mean in the ABB PBWP1290 description?
Without Plinth identifies a bottom enclosure arrangement that is not designed around a separate plinth in the specified configuration. The correct lower structural components and installation method must be confirmed using ABB's System Pro E Power assembly documentation.
What does W1250MM mean for the ABB PBWP1290?
W1250MM identifies a nominal enclosure width of 1250 mm. It is a configuration parameter used to select the appropriate bottom kit and does not necessarily represent the exact width of every supplied component.
What does D=900MM mean in the ABB PBWP1290 specification?
D=900MM identifies a nominal enclosure depth of 900 mm. The bottom kit should be matched to the corresponding System Pro E Power enclosure configuration and associated mounting components.
Which ABB switchgear systems are compatible with the PBWP1290?
The PBWP1290 belongs to the ABB System Pro E Power range. It should be used only with enclosure configurations that specify this product reference and match the required without-plinth, 1250 mm width and 900 mm depth designations.
Does the ABB PBWP1290 include a plinth?
The manufacturer's description explicitly identifies the product as a bottom kit without plinth. A separate plinth should not be assumed to be included. The exact contents of the kit should be confirmed using ABB's supply documentation.
Can the ABB PBWP1290 be used with a plinth-based enclosure arrangement?
The ABB PBWP1290 is specifically designated for a without-plinth configuration. Compatibility with a plinth-based arrangement should not be assumed. Select the bottom components specified for the intended enclosure design.
Does the ABB PBWP1290 include fixing hardware or cable-entry accessories?
The manufacturer's description does not confirm whether fasteners, mounting accessories, seals or cable-entry components are included. Check the applicable ABB parts list and kit documentation to determine any additional components required.
Does the ABB PBWP1290 provide a specific IP rating?
No specific ingress protection rating is stated in the supplied ABB PBWP1290 description. The kit does not independently establish an IP classification. The declared protection level depends on the complete enclosure design and correct installation of all required components.
What should be checked before ordering the ABB PBWP1290?
Confirm the ABB order code 1STQ007203A0000, product reference PBWP1290, without-plinth arrangement, nominal 1250 mm width and 900 mm depth. Check the relevant System Pro E Power enclosure parts list, mounting requirements and kit contents before ordering.
Designed for Professional ABB System Pro E Power Switchgear Installations
ABB System Pro E Power enclosure accessories support the construction, maintenance and refurbishment of professionally engineered low-voltage electrical distribution switchboards. The ABB PBWP1290 Bottom Kit Without Plinth provides a manufacturer-identified accessory for compatible 1250 mm-wide, 900 mm-deep enclosure configurations, helping panel builders and maintenance engineers select the correct components for their specified switchgear base arrangement.
