Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007200A0000 ABB PBWP1230 System pro E Power Internal Bottom Kit 1250 x 300 mm
ABB PBWP1230 (1STQ007200A0000) System pro E Power internal bottom panel kit for 1250 x 300 mm modular low-voltage electrical distribution enclosures, designed for compatible switchboard installations without a separate plinth.
£165.93
Why Choose the ABB PBWP1230 System pro E Power Internal Bottom Kit?
The ABB PBWP1230 (1STQ007200A0000) is a purpose-designed internal bottom panel kit for electrical distribution enclosures, developed for use with the ABB System pro E Power modular switchboard range. Designed for enclosures with a nominal width of 1250 mm and depth of 300 mm, this accessory provides a practical solution for completing the lower section of compatible electrical cabinets without requiring a separate plinth.
As part of the established ABB System pro E Power series, the PBWP1230 supports professional switchboard assembly and modular low-voltage distribution system construction. Its dedicated bottom panel configuration allows electrical panel builders to select the appropriate enclosure components for specific installation requirements, helping create a consistent and properly integrated cabinet assembly.
With nominal enclosure compatibility of 1250 mm wide by 300 mm deep, the ABB PBWP1230 is particularly suitable for wide, relatively shallow electrical distribution cabinets used in industrial and commercial installations. Its plinth-free design makes it a useful component for compatible switchboard configurations where a separate raised base is not required.
Key Advantages
- Genuine ABB System pro E Power enclosure accessory designed for compatible modular switchboards.
- 1250 mm nominal width and 300 mm nominal depth for correctly matched cabinet configurations.
- Internal bottom kit designed for installation without a plinth.
- Purpose-designed for professional low-voltage electrical distribution enclosure assembly.
- Supports flexible configuration of ABB modular switchboard structures.
- Suitable for wide electrical distribution cabinets with a relatively shallow enclosure depth.
- Helps simplify component selection when constructing compatible System pro E Power assemblies.
- Provides a dedicated lower enclosure component for professional electrical panel builders and installers.
Key Features
- ABB System pro E Power series enclosure accessory.
- PBWP1230 manufacturer product designation.
- 1STQ007200A0000 ABB order code.
- 1250 mm nominal enclosure width.
- 300 mm nominal enclosure depth.
- Dedicated internal bottom panel kit for modular switchboard construction.
- Without-plinth configuration for compatible enclosure installations.
- Designed for integration with ABB System pro E Power cabinet structures.
- Suitable for low-voltage power distribution enclosure applications.
- Supports professional assembly of modular electrical distribution boards.
- Purpose-matched enclosure accessory for the specified cabinet dimensions.
Reliable Enclosure Construction for Electrical Distribution Systems
The ABB PBWP1230 internal bottom kit is designed to form part of the lower section of compatible System pro E Power electrical switchboard structures. Internal bottom components contribute to the completion of modular cabinet assemblies by providing a dedicated panel arrangement matched to the enclosure's nominal dimensions. The PBWP1230 is specifically intended for 1250 × 300 mm enclosure configurations where a separate plinth is not used.
ABB System pro E Power is a modular enclosure platform developed for low-voltage power distribution applications. Its range of structural components and accessories allows panel builders to configure switchboards according to the required dimensions and installation arrangement. The PBWP1230 supports this modular approach by providing a purpose-designed bottom kit for compatible wide-format cabinets. Installation should follow ABB's assembly instructions, including any requirements for mounting hardware, floor fixing and the protection rating of the completed enclosure.
Typical Applications
- ABB System pro E Power modular switchboard assembly.
- Low-voltage main electrical distribution boards.
- Industrial electrical distribution cabinets.
- Commercial building power distribution installations.
- Electrical switchgear and distribution panel construction.
- Wide-format modular cabinets with a nominal depth of 300 mm.
- Compatible electrical enclosure installations without a separate plinth.
- Switchboard refurbishment and replacement of matching bottom components.
- Electrical panel building and OEM enclosure assembly.
- Modular cabinet installations requiring a 1250 × 300 mm nominal bottom configuration.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ007200A0000 |
| Product type | Internal bottom panel kit / electrical enclosure accessory |
| Manufacturer description | KIT BOT.WITH-OUT PLINTH W=1250MM D=300MM |
| Product function | Internal bottom component for modular electrical distribution enclosures |
| Nominal enclosure width | 1250 mm |
| Nominal enclosure depth | 300 mm |
| Nominal enclosure size (W × D) | 1250 × 300 mm |
| Plinth configuration | Without plinth |
| Installation position | Lower section of compatible enclosure structures |
| Compatible product range | ABB System pro E Power |
| Enclosure system | Modular low-voltage switchboard system |
| Application | Electrical distribution cabinet construction |
| Component category | Switchboard structural accessory |
Frequently Asked Questions
What is the ABB PBWP1230 1STQ007200A0000 used for?
The ABB PBWP1230 is an internal bottom panel kit designed for compatible ABB System pro E Power modular electrical distribution enclosures. It is used to complete the lower section of switchboard structures in professional low-voltage electrical installations.
What enclosure dimensions is the ABB PBWP1230 designed for?
The PBWP1230 is designed for compatible System pro E Power enclosures with a nominal 1250 mm width and 300 mm depth. These are the intended enclosure dimensions rather than the measured external dimensions of the individual kit components.
Does the ABB PBWP1230 require a plinth?
No. The PBWP1230 is specifically designated as a bottom kit without a plinth. It is intended for compatible System pro E Power enclosure arrangements that do not require a separate plinth component.
Is the ABB PBWP1230 compatible with other ABB enclosure ranges?
The PBWP1230 is identified as an accessory for the ABB System pro E Power modular switchboard range. Compatibility with other ABB enclosure systems should not be assumed and must be checked against the relevant manufacturer's assembly documentation.
Where is the ABB PBWP1230 typically installed?
The kit is installed in the lower section of a compatible modular electrical distribution cabinet. It is suitable for professional switchboard construction in industrial, commercial and building electrical distribution applications, subject to the specified enclosure configuration.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E Power components support flexible and professional low-voltage switchboard construction. The PBWP1230 internal bottom kit provides a purpose-designed solution for compatible 1250 × 300 mm modular distribution cabinets, combining accurate enclosure compatibility with the practical benefits of a plinth-free installation configuration.
