Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007194A0000 ABB PBWP8070 Bottom Kit Without Plinth 800 x 700 mm – System pro E power
ABB PBWP8070 1STQ007194A0000 System pro E power internal bottom kit manufactured from pickled sheet steel for compatible 800 mm wide and 700 mm deep low-voltage distribution switchboards installed without a separate plinth.
£139.88
Why Choose the ABB PBWP8070 Bottom Installation Kit Without Plinth?
The ABB PBWP8070 (1STQ007194A0000) is a dedicated bottom installation kit without plinth designed for compatible ABB System pro E power low-voltage electrical distribution switchboards. Identified by the manufacturer's designation KIT BOT.WITH-OUT PLINTH W=800MM D=700MM, this enclosure accessory is intended for switchboard structures with a nominal 800 mm width and 700 mm depth.
As part of the ABB System pro E power range, the PBWP8070 supports the modular construction of professional electrical distribution cabinets. Its purpose is to provide a dedicated bottom installation arrangement for compatible switchboard structures where a separate plinth is not incorporated into the enclosure configuration.
The ABB 1STQ007194A0000 is particularly suitable for electrical panel builders, switchboard manufacturers and installation engineers requiring a manufacturer-specific bottom assembly solution. Its compatibility with 800 mm wide and 700 mm deep enclosures helps simplify component selection and supports consistent construction of modular low-voltage distribution systems.
Key Advantages
- Genuine ABB System pro E power enclosure accessory for modular low-voltage switchboards.
- Designed for bottom installation without a separate plinth.
- 800 mm nominal enclosure width for compatible switchboard structures.
- 700 mm nominal enclosure depth for the specified configuration.
- Dedicated bottom installation arrangement supports professional switchboard assembly.
- Integrates with compatible ABB System pro E power modular enclosure components.
- Helps simplify component selection for electrical distribution cabinet construction.
- Suitable for industrial and commercial low-voltage power distribution installations.
Key Features
- ABB System pro E power product range.
- Manufacturer type: PBWP8070.
- ABB order code: 1STQ007194A0000.
- Product designation: KIT BOT.WITH-OUT PLINTH W=800MM D=700MM.
- Bottom installation kit for compatible modular electrical enclosures.
- Without-plinth configuration for switchboard base assembly.
- 800 mm nominal width.
- 700 mm nominal depth.
- Designed for installation at the bottom of compatible switchboard structures.
- Supports modular construction of low-voltage electrical distribution cabinets.
- Application-specific compatibility with the ABB System pro E power enclosure system.
- Suitable for professional electrical panel building and switchboard assembly.
Technical Specifications
- Manufacturer: ABB
- Product range: System pro E power
- Manufacturer type: PBWP8070
- ABB order code: 1STQ007194A0000
- Product designation: KIT BOT.WITH-OUT PLINTH W=800MM D=700MM
- Product type: Bottom installation kit without plinth
- Accessory category: Electrical switchboard enclosure base accessories
- Nominal enclosure width: 800 mm
- Nominal enclosure depth: 700 mm
- Installation position: Bottom of enclosure
- Plinth configuration: Without plinth
- Mounting application: Bottom assembly of compatible switchboard structures
- Compatible enclosure system: ABB System pro E power
- Equipment category: Low-voltage electrical distribution
- Application: Bottom installation of modular electrical switchboards without a separate plinth
Reliable Bottom Assembly for Modular Electrical Switchboards
The ABB PBWP8070 bottom installation kit is designed to support the construction of compatible System pro E power low-voltage distribution switchboards. The bottom section of an electrical enclosure forms an important part of the overall cabinet assembly, contributing to the structural arrangement and installation of the switchboard.
The PBWP8070 is specifically designated for without-plinth installations. This distinguishes it from enclosure configurations that incorporate a separate raised plinth assembly. Its dedicated design allows panel builders to select a bottom installation accessory appropriate to the intended switchboard construction.
The ABB System pro E power range provides a modular platform for low-voltage power distribution, supporting configurable enclosure structures, circuit protection devices, busbar systems and installation accessories. The system is used in electrical distribution assemblies designed in accordance with applicable requirements of IEC 61439.
With a nominal 800 mm width and 700 mm depth, the PBWP8070 is intended for the corresponding enclosure configuration. These measurements identify the compatible switchboard dimensions rather than necessarily representing the external dimensions of every individual component supplied in the kit. Installation should follow ABB assembly instructions, with the final enclosure arrangement, fixing requirements and protection characteristics verified for the completed switchboard.
Typical Applications
- ABB System pro E power low-voltage electrical distribution switchboards.
- Bottom assembly of compatible modular electrical enclosures.
- Switchboard installations designed without a separate plinth.
- Industrial electrical distribution cabinets.
- Commercial building main and sub-distribution boards.
- Electrical switchrooms and plant room distribution equipment.
- Modular switchboard manufacturing and electrical panel building.
- Enclosure assembly projects requiring an 800 mm wide and 700 mm deep bottom installation arrangement.
Frequently Asked Questions
What is the ABB PBWP8070 1STQ007194A0000 used for?
The ABB PBWP8070 is a bottom installation kit designed for compatible ABB System pro E power low-voltage electrical distribution switchboards. It is intended for enclosure configurations that do not incorporate a separate plinth.
What enclosure dimensions is the ABB PBWP8070 designed for?
The PBWP8070 is designed for compatible switchboard structures with a nominal 800 mm width and 700 mm depth, as specified in the manufacturer's product designation.
Does the ABB PBWP8070 include a plinth?
No. The ABB PBWP8070 is specifically designated as a bottom installation kit without plinth. It is intended for compatible switchboard configurations where a separate plinth is not part of the specified bottom assembly.
Which ABB enclosure system is compatible with the PBWP8070?
The ABB PBWP8070 (1STQ007194A0000) belongs to the System pro E power range and is designed for compatible modular low-voltage distribution switchboards with an 800 mm nominal width and 700 mm nominal depth.
Where is the ABB PBWP8070 installed?
The PBWP8070 is intended for installation at the bottom of a compatible electrical switchboard enclosure. The exact assembly arrangement and associated fixing components should follow ABB installation instructions for the selected System pro E power structure.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power enclosure accessories support the professional construction of modular low-voltage electrical distribution switchboards. The ABB PBWP8070 bottom installation kit provides a dedicated without-plinth assembly solution for compatible 800 mm wide and 700 mm deep enclosure structures, helping electrical engineers and panel builders create organised, application-specific power distribution installations.
