1STQ007193A0000 ABB PBWP8050 Bottom Kit Without Plinth 800 x 500 mm

Why Choose the ABB PBWP8050 Bottom Kit Without Plinth?

The ABB PBWP8050 (1STQ007193A0000) is a dedicated bottom enclosure installation kit without plinth for compatible ABB System Pro E Power modular low-voltage switchboards and electrical distribution cabinets. This original ABB accessory is intended for the lower section of a suitable switchboard enclosure, providing a manufacturer-designated bottom assembly configuration for installations where a plinth is not part of the specified arrangement.

Identified by ABB as PBWP8050 — KIT BOT.WITH-OUT PLINTH W=800MM D=500MM, the product is specified for an 800 mm nominal enclosure width and 500 mm nominal enclosure depth. These dimensions identify the intended cabinet configuration, helping panel builders select the appropriate bottom installation accessory for a compatible System Pro E Power enclosure.

As part of the ABB System Pro E Power range, the PBWP8050 supports coordinated modular switchboard construction. Its without-plinth designation distinguishes it from alternative cabinet base arrangements incorporating a plinth, making accurate identification important during enclosure design, component procurement, assembly and maintenance.

Key Advantages

• Original ABB System Pro E Power accessory for compatible modular low-voltage electrical switchboards.
• Dedicated bottom installation kit for the corresponding ABB enclosure configuration.
• Without-plinth arrangement for installations where a plinth is not part of the specified bottom kit.
• 800 mm nominal enclosure width supports accurate cabinet accessory selection.
• 500 mm nominal enclosure depth identifies the required switchboard footprint.
• Supports coordinated selection of lower enclosure components during professional switchboard construction.
• Helps distinguish non-plinth bottom assemblies from alternative cabinet base configurations.
• Designed for integration with compatible ABB System Pro E Power enclosure components.
• Suitable for electrical panel manufacturing, maintenance and refurbishment planning.
• ABB order code 1STQ007193A0000 enables precise product identification and procurement.

Key Features

• ABB System Pro E Power modular switchboard accessory.
• PBWP8050 manufacturer model designation.
• Bottom installation kit identified by the KIT BOT. designation.
• Without-plinth configuration identified by WITH-OUT PLINTH.
• 800 mm nominal cabinet width.
• 500 mm nominal cabinet depth.
• Intended for the lower section of compatible electrical enclosure structures.
• Supports coordinated modular switchboard assembly.
• Suitable for compatible low-voltage electrical distribution cabinet construction.
• Provides a defined ABB configuration for bottom accessory selection.
• Mounting details and fixing requirements are subject to the relevant ABB installation documentation.
• ABB manufacturer reference 1STQ007193A0000 for specification and replacement identification.

System Pro E Power Bottom Enclosure Integration for 800 x 500 mm Cabinets

The ABB PBWP8050 is designated for the bottom section of a compatible System Pro E Power switchboard. The lower enclosure arrangement forms part of the cabinet's overall construction and must be selected according to the intended frame dimensions, installation method and associated ABB structural components.

The manufacturer's KIT BOT. designation identifies the PBWP8050 as a bottom installation kit. This distinguishes it from top panels, side panels, doors, plinth assemblies and other enclosure accessories that perform different functions within the modular switchboard structure.

The WITH-OUT PLINTH designation is a defining feature of the product. A plinth is a separate base arrangement that may be used in some switchboard installations to raise the enclosure or provide a particular lower support configuration. The PBWP8050 is identified for a bottom assembly arrangement without a plinth as part of the designated kit configuration.

However, the without-plinth designation does not independently establish the cabinet's floor-fixing method, permissible mechanical loading, installation height or support requirements. These characteristics depend on the complete enclosure construction and the relevant ABB installation instructions. Any separately required fixing or support accessories must be selected accordingly.

The specified 800 mm nominal width and 500 mm nominal depth identify the intended enclosure footprint. These dimensions are important when matching the kit to a compatible System Pro E Power cabinet, but they should not be interpreted as independently verified physical dimensions of the individual components supplied in the kit.

The 500 mm nominal depth distinguishes the PBWP8050 from bottom kits intended for shallower cabinet configurations. For example, the ABB PBWP8030 is specified for an 800 mm nominal width and 300 mm nominal depth, whereas the PBWP8050 is designated for the same nominal width with a 500 mm depth. These accessories should not be treated as interchangeable without confirming compatibility.

During switchboard design, the bottom assembly should be considered alongside the enclosure frame, cable-entry requirements, floor interface and any protective or mechanical components required by the installation. The PBWP8050 identifies the designated bottom kit configuration, while the precise assembly method and compatible supplementary accessories must be established from ABB's technical documentation.

Where cables enter the cabinet from below, engineers should verify the relevant cable-entry components, mechanical clearances and protective arrangements. The PBWP8050 designation alone does not confirm the presence of cable-entry openings, gland plates, seals or other cable-management accessories within the supplied kit.

The manufacturer description does not specify an IP protection rating for the PBWP8050. Consequently, no particular dust or water ingress protection classification should be attributed to the kit independently. The achieved ingress protection of the completed switchboard depends on the entire enclosure arrangement, including its panels, joints, cable entries and associated components.

Likewise, the supplied designation does not establish the kit's material, surface finish, mechanical load capacity or exact package contents. These details should be checked against ABB's product and installation documentation, particularly where the completed switchboard must meet defined environmental or structural requirements.

For professional panel builders, selecting the correct original ABB bottom kit supports consistent modular assembly and accurate project documentation. The 1STQ007193A0000 order code provides a precise reference for identifying the PBWP8050 without-plinth configuration during procurement, installation, maintenance and future replacement.

Typical Applications

• ABB System Pro E Power modular low-voltage switchboards.
• Compatible electrical distribution cabinets requiring a bottom installation kit.
• Switchboard configurations specified without a plinth.
• Industrial electrical power distribution assemblies.
• Commercial building electrical distribution cabinets.
• Electrical control and automation enclosures using compatible ABB components.
• Cabinet configurations with an 800 mm nominal width and 500 mm nominal depth.
• Professional electrical panel manufacturing and assembly.
• Projects requiring coordinated ABB lower enclosure accessories.
• Compatible switchboard maintenance and refurbishment.
• Replacement of matching System Pro E Power bottom installation components.