Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007188A0000 ABB PBWP7530 System pro E Power Bottom Kit Without Plinth 750 x 300 mm
ABB PBWP7530 System pro E Power bottom enclosure kit without plinth designed for compatible low-voltage switchboard structures with a nominal width of 750 mm and depth of 300 mm.
£139.01
Why Choose the ABB PBWP7530 System pro E Power Bottom Kit Without Plinth?
The ABB PBWP7530 is a dedicated bottom enclosure kit without plinth designed for compatible ABB System pro E Power low-voltage switchboard assemblies. Specified for enclosure structures with a nominal width of 750 mm and depth of 300 mm, this accessory provides a manufacturer-designated solution for constructing the lower section of modular electrical distribution cabinets without incorporating a separate raised plinth.
As part of the ABB System pro E Power range, the PBWP7530 supports professional switchboard construction where a bottom installation arrangement without a plinth is required. Its dedicated dimensional configuration helps electrical panel builders coordinate enclosure components, cabinet layouts and installation requirements within compatible System pro E Power structures.
Identified by ABB order code 1STQ007188A0000, the ABB PBWP7530 bottom kit is suitable for industrial and commercial low-voltage distribution applications where the enclosure design calls for a 750 mm wide and 300 mm deep bottom arrangement. The kit forms part of the enclosure assembly rather than a complete cabinet or electrical protection system. Exact kit contents, structural mounting requirements and any additional closure or cable-entry accessories should be verified against the applicable ABB technical documentation.
Key Advantages
- Purpose-designed bottom kit for ABB System pro E Power switchboards.
- Specified for enclosure installation without a plinth.
- 750 mm nominal width for compatible modular switchboard structures.
- 300 mm nominal depth for matching enclosure configurations.
- Supports coordinated construction of the lower section of electrical distribution cabinets.
- Suitable for switchboard designs that do not incorporate a separate raised plinth arrangement.
- Provides a dedicated ABB accessory for the specified enclosure dimensions.
- Supports modular low-voltage switchboard construction and professional panel assembly.
- Helps panel builders coordinate cabinet dimensions and associated enclosure components.
- Suitable for industrial and commercial electrical distribution applications.
Key Features
- Manufacturer: ABB.
- Product series: System pro E Power.
- Model: PBWP7530.
- ABB order code: 1STQ007188A0000.
- Product type: Bottom enclosure installation kit.
- Configuration: Without plinth.
- Nominal enclosure width: 750 mm.
- Nominal enclosure depth: 300 mm.
- Installation position: Bottom of a compatible enclosure.
- Designed for integration into compatible ABB System pro E Power modular switchboard structures.
- Supports enclosure construction where a separate raised plinth is not part of the specified arrangement.
- Suitable for professional low-voltage electrical distribution assemblies.
- Exact kit contents and adjoining enclosure components should be confirmed against ABB assembly documentation.
Bottom Enclosure Integration for Industrial Power Distribution
The ABB System pro E Power platform supports modular construction of low-voltage electrical switchboards used in manufacturing facilities, commercial buildings and electrical infrastructure. Selecting suitable enclosure accessories is essential for coordinating cabinet dimensions, structural arrangements, equipment installation and the requirements of the completed assembly. Bottom kits are selected alongside other enclosure components to establish the intended configuration of the lower cabinet section.
The ABB PBWP7530 is specified as a bottom kit without plinth for compatible 750 mm wide and 300 mm deep System pro E Power structures. Its configuration is relevant to installations where a separate raised plinth is not required. The product should not be assumed to include a complete cabinet base, floor-standing support system, cable-entry equipment or additional accessories unless these are confirmed in ABB documentation. Any mechanical support requirements and enclosure protection rating must be assessed as part of the completed switchboard installation.
Typical Applications
- ABB System pro E Power low-voltage switchboard assemblies.
- Industrial electrical distribution cabinets.
- Commercial building power distribution enclosures.
- Modular switchboard structures with a nominal width of 750 mm and depth of 300 mm.
- Enclosure installations designed without a separate raised plinth.
- Electrical control and distribution panel construction.
- Manufacturing plant electrical infrastructure.
- Main and sub-distribution switchboard enclosure assembly.
- OEM switchgear manufacturing and equipment integration.
- Professional electrical panel-building projects requiring dedicated bottom enclosure components.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ007188A0000 |
| Manufacturer description | KIT BOT WITH-OUT PLINTHW=750MM D=300MM |
| Product type | Bottom enclosure kit |
| Installation configuration | Without plinth |
| Nominal enclosure width | 750 mm |
| Nominal enclosure depth | 300 mm |
| Nominal dimensional format | 750 mm × 300 mm |
| Installation position | Bottom |
| Compatible enclosure system | ABB System pro E Power |
| Application | Low-voltage switchboard enclosure construction |
| Product group | System pro E Power |
| Equipment category | Switchboard enclosure bottom kits and accessories |
Frequently Asked Questions
What is the ABB PBWP7530 used for?
The ABB PBWP7530 is a bottom enclosure kit designed for compatible ABB System pro E Power low-voltage switchboard structures. It supports construction of the lower enclosure section in an installation configuration without a separate plinth.
What enclosure dimensions is the ABB PBWP7530 designed for?
The PBWP7530 is specified for compatible System pro E Power enclosure structures with a nominal 750 mm width and 300 mm depth.
What does without plinth mean for the PBWP7530?
The manufacturer's without-plinth designation identifies a bottom kit intended for an enclosure configuration that does not incorporate a separate raised plinth arrangement. The correct mounting method and any additional structural components should be confirmed against ABB installation documentation.
Does the ABB PBWP7530 include a plinth or complete enclosure?
The ABB PBWP7530 is identified as a bottom kit without plinth, rather than a complete switchboard enclosure. A plinth is not part of the specified configuration, and the inclusion of other enclosure components or mounting accessories should not be assumed without checking the manufacturer's kit contents.
Which ABB enclosure system is compatible with the PBWP7530?
The PBWP7530 belongs to the ABB System pro E Power range and is intended for compatible modular low-voltage switchboard structures with a nominal 750 mm width and 300 mm depth. Compatibility with the complete enclosure arrangement should be verified using the applicable ABB technical documentation.
Trusted by Electrical Panel Builders and Industrial Engineers
ABB System pro E Power enclosure accessories support professional construction of modular low-voltage electrical switchboards. The ABB PBWP7530 bottom kit without plinth provides a dedicated component for compatible 750 mm wide and 300 mm deep enclosure structures, helping panel builders coordinate cabinet dimensions, lower-section installation requirements and modular electrical distribution assembly construction.
