Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007180A0000 ABB PBWP4090 Bottom Kit Without Plinth 400 x 900 mm System pro E power
ABB PBWP4090 bottom installation kit without plinth, order code 1STQ007180A0000, designed for compatible 400 mm-wide and 900 mm-deep System pro E power low-voltage electrical distribution switchboard cabinets.
£76.54
Why Choose the ABB PBWP4090 Bottom Kit Without Plinth?
The ABB PBWP4090, manufacturer order code 1STQ007180A0000, is a dedicated bottom installation kit without plinth designed for ABB System pro E power low-voltage electrical distribution switchboards. This enclosure accessory is specified for compatible modular switchboard cabinets with a nominal width of 400 mm and depth of 900 mm.
As part of the ABB System pro E power modular switchboard range, the PBWP4090 supports professional electrical panel construction by providing a dedicated bottom assembly configuration for installations where a separate plinth is not used. Its application-specific design helps electrical panel builders select compatible enclosure components for coordinated switchboard construction.
The ABB PBWP4090 bottom kit is intended for 400 mm-wide × 900 mm-deep System pro E power cabinet configurations. Its without-plinth arrangement distinguishes it from enclosure base assemblies intended for use with a separate raised plinth, making it an appropriate selection for compatible switchboard installations designed without that additional base structure.
Key Advantages
- Genuine ABB System pro E power enclosure accessory for modular electrical switchboards.
- Dedicated bottom installation kit without plinth.
- Specified for 400 mm-wide × 900 mm-deep cabinet configurations.
- Supports switchboard designs where a separate raised plinth is not required.
- Provides an application-specific solution for the lower section of compatible enclosures.
- Helps simplify selection of coordinated switchboard base components.
- Designed for integration with compatible ABB System pro E power structural components.
- Supports professional electrical cabinet assembly and installation planning.
- Suitable for industrial and commercial low-voltage power distribution applications.
- Provides a dedicated manufacturer order code for accurate component identification and procurement.
Key Features
- ABB PBWP4090 bottom enclosure installation kit.
- System pro E power modular switchboard series.
- Without-plinth configuration.
- 400 mm nominal cabinet width.
- 900 mm nominal cabinet depth.
- Designed for the bottom section of compatible electrical distribution cabinets.
- Supports enclosure assembly arrangements without a separate raised plinth.
- Application-specific compatibility with ABB System pro E power enclosures.
- Suitable for coordinated modular switchboard construction.
- Manufacturer order code 1STQ007180A0000.
Bottom Enclosure Integration Without a Separate Plinth
The ABB System pro E power range provides a modular platform for constructing low-voltage electrical distribution switchboards. Its coordinated structural and enclosure accessories allow electrical panel builders to configure cabinets according to the dimensions, installation requirements and component arrangements of each project.
The ABB PBWP4090 provides a dedicated bottom installation kit for compatible cabinet sections measuring 400 mm in width and 900 mm in depth. Its manufacturer designation specifically identifies a without-plinth configuration, allowing panel builders to distinguish this product from base arrangements designed for use with separate plinth structures.
A switchboard plinth is a separate base structure that may be used to raise a cabinet above its supporting surface, depending on the enclosure system and installation design. A bottom kit without plinth is intended for a different cabinet base arrangement and should be selected according to the relevant ABB assembly instructions.
The 900 mm cabinet depth makes the PBWP4090 suitable for corresponding deeper System pro E power cabinet configurations. The bottom assembly must be coordinated with the cabinet frame, floor installation method and any required cable-entry or closing components.
The PBWP4090 should not be assumed to include a separate plinth, floor-fixing hardware, cable-entry accessories or sealing components unless these are explicitly identified in the applicable ABB bill of materials. Any required enclosure protection rating depends on the complete cabinet assembly and its correctly installed components.
Typical Applications
- ABB System pro E power modular electrical switchboards.
- Industrial low-voltage power distribution cabinets.
- Commercial building electrical distribution assemblies.
- Bottom enclosure assemblies without separate plinth structures.
- 400 mm-wide and 900 mm-deep modular cabinet sections.
- Electrical switchboards requiring coordinated bottom installation components.
- Cabinet assembly projects using compatible non-plinth base configurations.
- Industrial electrical distribution enclosure construction.
- Professional switchboard manufacturing and electrical panel building.
- Replacement or installation of compatible ABB bottom enclosure kits.
Technical Specifications
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ007180A0000 |
| Product type | Bottom installation kit without plinth |
| Manufacturer description | KIT BOT.WITH-OUT PLINTH W=400MM D=900MM |
| Compatible cabinet width | 400 mm |
| Compatible cabinet depth | 900 mm |
| Installation position | Bottom |
| Base configuration | Without plinth |
| Compatible enclosure system | ABB System pro E power |
| Application | Low-voltage switchboard enclosure assembly |
| Product category | Electrical Enclosure Accessories |
| ABB product group | System Pro E Power |
Frequently Asked Questions
What is the ABB PBWP4090 used for?
The ABB PBWP4090 is a bottom installation kit without plinth, designed for compatible ABB System pro E power low-voltage electrical switchboard cabinets measuring 400 mm in width and 900 mm in depth.
What cabinet dimensions is the ABB PBWP4090 designed for?
The PBWP4090 is specified for compatible System pro E power cabinets with a 400 mm width and 900 mm depth. These values identify the intended cabinet configuration rather than necessarily representing the exact dimensions of every kit component.
What does without plinth mean for the ABB PBWP4090?
Without plinth means that the PBWP4090 is designated for a bottom enclosure arrangement that does not use a separate raised plinth. The appropriate cabinet base configuration must be selected according to ABB's assembly documentation.
Is the ABB PBWP4090 compatible with System pro E power switchboards?
Yes. The ABB PBWP4090 belongs to the System pro E power product range and is intended for compatible modular switchboard enclosure configurations.
Where is the ABB PBWP4090 installed?
The PBWP4090 is designated as a bottom installation kit for the lower section of a compatible ABB System pro E power cabinet.
Does the ABB PBWP4090 include a separate plinth?
No separate plinth is specified in the PBWP4090 without-plinth designation. Any additional mounting, fixing, sealing or cable-entry components should be identified from the applicable ABB bill of materials.
What is the ABB order code for the PBWP4090?
The manufacturer order code for the ABB PBWP4090 bottom installation kit without plinth is 1STQ007180A0000.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power enclosure accessories support professional low-voltage electrical distribution assemblies. The ABB PBWP4090 bottom installation kit provides a coordinated without-plinth arrangement for compatible 400 mm-wide and 900 mm-deep cabinet sections, supporting flexible switchboard construction and accurate enclosure component selection.
