Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007179A0000 ABB PBWP4070 System pro E Power Bottom Kit Without Plinth W400 D700
ABB PBWP4070 is a System pro E power bottom installation kit without plinth, designed for compatible low-voltage switchgear enclosures with a nominal width of 400 mm and depth of 700 mm.
£66.52
Why Choose the ABB PBWP4070 System pro E Power Bottom Kit Without Plinth?
The ABB PBWP4070 is a dedicated bottom installation kit without plinth from the ABB System pro E power range, designed for compatible low-voltage switchgear enclosures measuring 400 mm wide × 700 mm deep. This structural accessory supports modular electrical distribution cabinet construction where a bottom arrangement without a separate plinth is required.
As part of ABB's professional System pro E power platform, the PBWP4070 provides a manufacturer-specific solution for the lower section of compatible switchboard structures. Its non-plinth configuration distinguishes it from enclosure base accessories intended for raised cabinet installations, helping electrical panel builders select the correct components for their intended mounting arrangement.
Identified by ABB order code 1STQ007179A0000, the PBWP4070 is suitable for compatible industrial and commercial electrical distribution assemblies. Its specified 400 × 700 mm width-and-depth configuration supports accurate accessory selection for new switchboard construction, enclosure assembly, maintenance and refurbishment projects.
Key Advantages
- Dedicated bottom installation kit for compatible ABB System pro E power enclosures.
- Specifically designed for installations without a plinth.
- Suitable for a 400 mm nominal enclosure width.
- Designed for a 700 mm nominal enclosure depth.
- Supports modular switchboard construction with the specified bottom arrangement.
- Provides a manufacturer-defined solution for non-plinth enclosure configurations.
- Helps maintain consistency when selecting compatible switchgear structural accessories.
- Suitable for professional electrical panel building, maintenance and refurbishment.
- Genuine ABB component identified by order code 1STQ007179A0000.
Key Features
- ABB PBWP4070 bottom installation kit.
- System pro E power product series.
- Without-plinth installation configuration.
- Bottom enclosure application.
- 400 mm nominal enclosure width.
- 700 mm nominal enclosure depth.
- Designed for compatible modular low-voltage switchgear structures.
- Supports the construction of the lower enclosure arrangement.
- Suitable for industrial and commercial electrical distribution cabinets.
- Manufacturer order code 1STQ007179A0000.
Technical Specifications
- Manufacturer: ABB
- Series: System pro E power
- Model: PBWP4070
- ABB order code: 1STQ007179A0000
- Product type: Bottom installation kit without plinth
- Installation position: Bottom
- Plinth configuration: Without plinth
- Nominal enclosure width: 400 mm
- Nominal enclosure depth: 700 mm
- Nominal enclosure configuration (W × D): 400 × 700 mm
- Product group: System Pro E Power
- Application: Bottom arrangement of compatible low-voltage switchgear enclosures
- System compatibility: ABB System pro E power
- Component classification: Switchgear enclosure bottom kit and structural accessory
Practical Bottom Enclosure Integration Without a Plinth
The bottom section of a modular electrical switchboard forms an important part of the overall enclosure arrangement. Selecting the correct bottom accessories helps electrical panel builders create a coordinated cabinet structure that matches the specified enclosure dimensions and installation requirements.
The ABB PBWP4070 is specifically identified as a bottom kit without plinth for a 400 mm wide × 700 mm deep System pro E power configuration. This makes it appropriate for compatible switchboard arrangements where the manufacturer specifies a bottom installation solution without a separate plinth structure.
The ABB System pro E power range includes modular enclosure frameworks, top and bottom accessories, plinth components, internal mounting systems and circuit breaker installation kits. The PBWP4070 forms part of this coordinated accessory platform, supporting consistent selection of enclosure components during electrical distribution board construction.
Unlike a dedicated plinth kit, the PBWP4070 is intended for the specified non-plinth bottom configuration. Its selection should therefore be based on the actual switchboard structure, installation method and associated enclosure components rather than width and depth alone.
The PBWP4070 is an enclosure accessory rather than a complete cabinet or electrical protection device. Mechanical support, ingress protection and installation suitability depend on the completed enclosure design and correct assembly according to the applicable ABB instructions.
Typical Applications
- ABB System pro E power low-voltage switchgear enclosures.
- Bottom installation arrangements without a plinth.
- Compatible 400 × 700 mm modular enclosure configurations.
- Industrial main electrical distribution boards.
- Commercial building electrical distribution cabinets.
- Modular switchgear structural assembly.
- Professional electrical panel building and switchboard manufacturing.
- Maintenance and refurbishment of compatible ABB enclosure bottom components.
Frequently Asked Questions
What is the ABB PBWP4070 used for?
The ABB PBWP4070 is a bottom installation kit designed for compatible ABB System pro E power low-voltage switchgear enclosures requiring a without-plinth configuration.
What enclosure dimensions does the ABB PBWP4070 support?
The PBWP4070 is specified for an enclosure arrangement measuring 400 mm wide × 700 mm deep.
Does the ABB PBWP4070 require a plinth?
No. The product is specifically identified as a bottom kit without plinth. It should be used where this configuration is compatible with the intended System pro E power enclosure assembly.
Which ABB product range is the PBWP4070 designed for?
The PBWP4070 belongs to the ABB System pro E power range of modular low-voltage switchgear and electrical distribution equipment.
What is the ABB order code for the PBWP4070?
The manufacturer's order code is 1STQ007179A0000, identifying the ABB PBWP4070 bottom kit without plinth for a 400 mm wide and 700 mm deep enclosure configuration.
Trusted ABB Accessories for Professional Switchboard Construction
ABB System pro E power enclosure accessories support the modular construction and configuration of industrial and commercial low-voltage electrical distribution switchboards. The ABB PBWP4070 provides a dedicated bottom installation solution without plinth for compatible 400 × 700 mm enclosure arrangements, supporting consistent component selection and professional electrical panel assembly.
