Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007173A0000 ABB PBWP3050 System pro E Power Bottom Kit Without Plinth 300 x 500 mm
ABB PBWP3050 System pro E Power bottom enclosure kit without plinth for compatible low-voltage switchboard structures with nominal 300 mm and 500 mm width/depth dimensions.
£49.59
Why Choose the ABB PBWP3050 System pro E Power Bottom Kit Without Plinth?
The ABB PBWP3050 is a dedicated bottom enclosure kit without plinth designed for compatible ABB System pro E Power low-voltage switchboard assemblies. Identified by ABB order code 1STQ007173A0000, this accessory is specified for enclosure arrangements with nominal dimensions of 300 mm × 500 mm, supporting modular electrical distribution cabinet construction where a separate raised plinth is not required.
As part of the ABB System pro E Power range, the PBWP3050 provides a manufacturer-designated solution for configuring the lower section of compatible switchboard structures. The product description, KIT BOT.WITH-OUT PLIN. W/D300MM D/W500MM, identifies a bottom kit without plinth and indicates a reversible width/depth dimensional designation. This allows the specified dimensions to be considered in compatible 300 mm wide × 500 mm deep or 500 mm wide × 300 mm deep arrangements, subject to confirmation against ABB assembly documentation.
The ABB PBWP3050 bottom kit supports professional enclosure construction for industrial and commercial low-voltage distribution systems. Its without-plinth configuration makes it relevant to switchboard designs where the lower enclosure arrangement must be coordinated without a separate plinth assembly. Correct selection of adjoining structural components, mounting accessories and any required bottom closure or cable-entry provisions remains essential for the completed installation.
Key Advantages
- Purpose-designed bottom kit for ABB System pro E Power switchboards.
- Specified for enclosure installation without a plinth.
- Supports nominal 300 mm × 500 mm enclosure arrangements.
- Manufacturer description includes W/D and D/W dimensional references.
- Suitable for compatible enclosure configurations requiring a dedicated lower-section kit.
- Supports modular construction of low-voltage electrical distribution cabinets.
- Provides a manufacturer-specific accessory for coordinated enclosure assembly.
- Helps panel builders select bottom components according to cabinet dimensions.
- Suitable for industrial and commercial electrical distribution applications.
- Supports professional switchgear manufacturing and electrical panel-building workflows.
Key Features
- Manufacturer: ABB.
- Product series: System pro E Power.
- Model: PBWP3050.
- ABB order code: 1STQ007173A0000.
- Product type: Bottom enclosure installation kit.
- Configuration: Without plinth.
- First nominal dimension: 300 mm.
- Second nominal dimension: 500 mm.
- Manufacturer dimensional designation: W/D300MM D/W500MM.
- Installation position: Bottom of a compatible enclosure.
- Designed for compatible ABB System pro E Power modular switchboard structures.
- Suitable for enclosure designs that do not incorporate a separate raised plinth.
- Supports coordinated construction of the lower section of electrical distribution cabinets.
- Exact mounting arrangements and kit contents should be confirmed using ABB technical documentation.
Bottom Enclosure Integration for Industrial Power Distribution
The ABB System pro E Power platform provides modular components for constructing low-voltage electrical switchboards used in industrial facilities, commercial buildings and electrical infrastructure. Bottom enclosure kits are selected as part of the overall cabinet design, alongside structural frames, panels, doors and other installation accessories. Matching the manufacturer's dimensional references helps panel builders coordinate the lower enclosure section with the intended switchboard layout.
The ABB PBWP3050 is specified as a bottom kit without plinth with nominal 300 mm and 500 mm dimensions. Its W/D and D/W designation should be checked against ABB assembly drawings to confirm the permitted orientation for the selected enclosure. The kit should not be assumed to include a complete cabinet base, structural support system, cable-entry equipment or additional accessories unless these are explicitly identified in the manufacturer's documentation. Any required enclosure protection rating must be established for the complete assembled switchboard rather than attributed to the bottom kit alone.
Typical Applications
- ABB System pro E Power low-voltage switchboard assemblies.
- Industrial electrical distribution cabinets.
- Commercial building electrical distribution enclosures.
- Modular switchboard structures using compatible 300 mm × 500 mm dimensional arrangements.
- Enclosure installations designed without a separate raised plinth.
- Electrical control and distribution panel construction.
- Manufacturing plant electrical infrastructure.
- Main and sub-distribution switchboard enclosure assembly.
- OEM switchgear manufacturing and equipment integration.
- Professional electrical panel-building projects requiring dedicated bottom enclosure accessories.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ007173A0000 |
| Manufacturer description | KIT BOT.WITH-OUT PLIN. W/D300MM D/W500MM |
| Product type | Bottom enclosure kit |
| Installation configuration | Without plinth |
| First nominal dimension | 300 mm |
| Second nominal dimension | 500 mm |
| Manufacturer width/depth reference | W/D 300 mm |
| Manufacturer depth/width reference | D/W 500 mm |
| Nominal dimensional format | 300 mm × 500 mm |
| Installation position | Bottom |
| Compatible enclosure system | ABB System pro E Power |
| Application | Low-voltage switchboard enclosure construction |
| Product group | System pro E Power |
| Equipment category | Switchboard enclosure bottom kits and accessories |
Frequently Asked Questions
What is the ABB PBWP3050 used for?
The ABB PBWP3050 is a bottom enclosure kit designed for compatible ABB System pro E Power low-voltage switchboard structures. It supports the construction of the lower enclosure section in a configuration that does not incorporate a separate plinth.
What dimensions is the ABB PBWP3050 designed for?
The manufacturer's description specifies nominal dimensions of 300 mm and 500 mm, identified as W/D300MM D/W500MM. This indicates a width/depth dimensional arrangement that should be matched to the applicable ABB enclosure configuration and installation drawings.
What does without plinth mean for the PBWP3050?
The without-plinth designation identifies a bottom kit intended for an enclosure configuration that does not incorporate a separate raised plinth arrangement. The correct mounting method and any additional structural components should be confirmed against ABB technical documentation.
Does the ABB PBWP3050 include a plinth or complete enclosure?
The ABB PBWP3050 is identified as a bottom kit without plinth, not a complete electrical enclosure. A plinth is not part of the specified configuration, and the inclusion of other cabinet components or mounting accessories should not be assumed without checking the manufacturer's kit contents.
Which ABB enclosure system is compatible with the PBWP3050?
The PBWP3050 belongs to the ABB System pro E Power range and is intended for compatible modular low-voltage switchboard structures using the specified 300 mm × 500 mm dimensional arrangement. Exact enclosure compatibility and permitted installation orientation should be verified using ABB assembly documentation.
Trusted by Electrical Panel Builders and Industrial Engineers
ABB System pro E Power enclosure accessories support professional construction of modular low-voltage electrical switchboards. The ABB PBWP3050 bottom kit without plinth provides a dedicated component for compatible 300 mm × 500 mm enclosure arrangements, helping electrical panel builders coordinate cabinet dimensions, lower-section installation requirements and modular distribution assembly construction.
