Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007172A0000 ABB PBWP3030 System pro E Power Bottom Kit Without Plinth 300 x 300 mm
ABB PBWP3030 System pro E Power bottom enclosure kit without plinth designed for compatible low-voltage switchboard structures with a nominal width of 300 mm and depth of 300 mm.
£42.93
Why Choose the ABB PBWP3030 System pro E Power Bottom Kit Without Plinth?
The ABB PBWP3030 is a dedicated bottom installation kit without plinth designed for compatible ABB System pro E Power low-voltage switchboard enclosures. Specified for cabinet structures with a nominal width of 300 mm and depth of 300 mm, this accessory supports the construction of modular electrical distribution assemblies where a bottom kit is required without a plinth arrangement.
As part of the ABB System pro E Power range, the PBWP3030 provides a manufacturer-specified solution for the lower section of compatible switchboard structures. Its without-plinth configuration makes it relevant to enclosure designs that do not require a raised plinth base, helping electrical panel builders select components according to the intended cabinet layout and installation requirements.
The ABB PBWP3030 bottom kit, identified by ABB order code 1STQ007172A0000, is intended for professional low-voltage switchboard construction in industrial and commercial electrical installations. Its compact 300 mm × 300 mm nominal enclosure format supports coordinated component selection within the System pro E Power platform. The complete enclosure configuration, mounting requirements and any additional bottom closure or cable-entry components should be verified against the applicable ABB assembly documentation.
Key Advantages
- Purpose-designed bottom kit for ABB System pro E Power enclosures.
- Specified for installation without a plinth.
- 300 mm nominal width for compatible modular switchboard structures.
- 300 mm nominal depth for matching enclosure configurations.
- Supports coordinated construction of the lower section of electrical distribution cabinets.
- Suitable for switchboard designs where a separate raised plinth arrangement is not required.
- Provides a dedicated ABB accessory for the specified enclosure dimensions.
- Supports modular low-voltage switchboard construction and professional panel assembly.
- Helps simplify selection of enclosure components by matching the manufacturer's dimensional designation.
- Suitable for industrial and commercial electrical distribution applications.
Key Features
- Manufacturer: ABB.
- Product series: System pro E Power.
- Model: PBWP3030.
- ABB order code: 1STQ007172A0000.
- Product type: Bottom enclosure installation kit.
- Configuration: Without plinth.
- Nominal enclosure width: 300 mm.
- Nominal enclosure depth: 300 mm.
- Installation location: Lower section of a compatible enclosure.
- Designed for compatible ABB System pro E Power modular switchboard structures.
- Supports enclosure construction where a raised plinth base is not part of the specified arrangement.
- Suitable for integration into professional low-voltage electrical distribution assemblies.
- Exact kit contents and adjoining enclosure components should be confirmed against ABB documentation.
Bottom Enclosure Integration for Industrial Power Distribution
The ABB System pro E Power platform supports modular construction of low-voltage electrical switchboards used in industrial facilities, commercial buildings and electrical infrastructure. Selecting the correct enclosure accessories is essential for coordinating cabinet dimensions, structural arrangements and installation requirements. Bottom kits form part of this enclosure component selection process, allowing panel builders to configure the lower section of a switchboard according to the intended cabinet design.
The ABB PBWP3030 is specified as a bottom kit without plinth for compatible 300 mm wide and 300 mm deep System pro E Power structures. It is intended for configurations that do not incorporate a separate plinth arrangement. The kit should not be assumed to include a complete cabinet base, floor-standing support system, cable-entry equipment or other accessories unless these are confirmed in ABB's documentation. The mechanical installation, enclosure protection rating and any additional components must be assessed as part of the completed switchboard assembly.
Typical Applications
- ABB System pro E Power low-voltage switchboard assemblies.
- Industrial electrical distribution cabinets.
- Commercial building power distribution enclosures.
- Modular switchboard structures with a 300 mm nominal width and depth.
- Enclosure installations designed without a raised plinth arrangement.
- Electrical control and distribution panel construction.
- Manufacturing plant electrical infrastructure.
- Main and sub-distribution switchboard enclosure assembly.
- OEM electrical equipment and switchgear manufacturing.
- Professional electrical panel-building and enclosure integration projects.
Technical Specifications
| Series | System pro E Power |
|---|---|
| ABB order code | 1STQ007172A0000 |
| Manufacturer description | KIT BOT.WITH-OUT PLINTH W=300MM D=300MM |
| Product type | Bottom enclosure kit |
| Installation configuration | Without plinth |
| Nominal enclosure width | 300 mm |
| Nominal enclosure depth | 300 mm |
| Installation position | Bottom of compatible enclosure |
| Compatible enclosure system | ABB System pro E Power |
| Application | Low-voltage switchboard enclosure construction |
| Product group | System pro E Power |
| Equipment category | Switchboard enclosure bottom kits and accessories |
Frequently Asked Questions
What is the ABB PBWP3030 used for?
The ABB PBWP3030 is a bottom enclosure kit designed for compatible ABB System pro E Power low-voltage switchboard structures. It supports the construction of the lower enclosure section in an installation configuration without a plinth.
What enclosure dimensions is the ABB PBWP3030 designed for?
The PBWP3030 is specified for compatible System pro E Power enclosure structures with a nominal 300 mm width and 300 mm depth.
What does without plinth mean for the PBWP3030?
The manufacturer's without-plinth designation identifies a bottom kit intended for an enclosure configuration that does not incorporate a separate raised plinth arrangement. The exact mounting method and required adjoining components should be confirmed against ABB installation documentation.
Does the ABB PBWP3030 include a plinth or complete enclosure?
The ABB PBWP3030 is identified as a bottom kit without plinth, rather than a complete switchboard enclosure. A plinth is not part of the specified configuration, and the inclusion of other enclosure components should not be assumed without checking the manufacturer's kit contents.
Which ABB enclosure system is compatible with the PBWP3030?
The PBWP3030 belongs to the ABB System pro E Power range and is intended for compatible modular low-voltage switchboard structures with a nominal 300 mm width and 300 mm depth. Compatibility with the complete enclosure configuration should be verified using the applicable ABB technical documentation.
Trusted by Electrical Panel Builders and Industrial Engineers
ABB System pro E Power enclosure accessories support professional construction of modular low-voltage electrical switchboards. The ABB PBWP3030 bottom kit without plinth provides a dedicated component for compatible 300 mm wide and 300 mm deep enclosure structures, helping panel builders coordinate cabinet dimensions, lower enclosure arrangements and installation requirements within the completed electrical distribution assembly.
