Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007169A0000 ABB PBWP2550 Bottom Installation Kit Without Plinth 250 x 500 mm
ABB 1STQ007169A0000 PBWP2550 is a System pro E power bottom installation kit without plinth for compatible low-voltage switchboard structures with a nominal width of 250 mm and depth of 500 mm.
£66.32
Why Choose the ABB PBWP2550 Bottom Installation Kit Without Plinth?
The ABB PBWP2550 (1STQ007169A0000) is a dedicated bottom installation kit without plinth from the ABB System pro E power range. Designed for compatible low-voltage electrical switchboard structures, this accessory supports the assembly of the lower enclosure section where a separate plinth is not part of the specified installation configuration.
Identified by ABB as KIT BOT.WITH-OUT PLINTH W=250MM D=500MM, the PBWP2550 is intended for a compatible switchboard structure with a nominal width of 250 mm and a nominal depth of 500 mm. Its manufacturer designation specifies a bottom installation arrangement without plinth, making it important to distinguish this product from bottom assembly kits intended for configurations incorporating a plinth.
As part of the modular ABB System pro E power platform, the 1STQ007169A0000 is intended for electrical panel builders, switchgear manufacturers and industrial electrical contractors requiring application-specific enclosure assembly accessories. It helps installers select the appropriate bottom configuration for compatible ABB electrical distribution switchboards.
Key Advantages
- Dedicated ABB System pro E power bottom installation kit.
- Specifically designated for switchboard configurations without a plinth.
- Designed for compatible 250 mm wide switchboard structures.
- Specified for a 500 mm nominal switchboard depth.
- Supports coordinated assembly of the lower section of compatible electrical enclosures.
- Provides an application-specific alternative to bottom installation arrangements incorporating a plinth.
- Helps panel builders select components according to the intended switchboard construction.
- Supports integration within the ABB System pro E power modular enclosure platform.
- Suitable for professional industrial and commercial low-voltage distribution projects.
- Helps maintain consistency when specifying compatible ABB switchboard accessories.
Key Features
- ABB System pro E power series installation accessory.
- Manufacturer type designation: PBWP2550.
- ABB order code: 1STQ007169A0000.
- Manufacturer description: KIT BOT.WITH-OUT PLINTH W=250MM D=500MM.
- Bottom installation kit for compatible switchboard assemblies.
- Without-plinth configuration identified in the manufacturer description.
- 250 mm nominal switchboard width.
- 500 mm nominal switchboard depth.
- Designed for the bottom section of compatible ABB System pro E power structures.
- Supports modular switchboard construction using coordinated ABB components.
- Application-specific accessory for professional low-voltage electrical enclosure assembly.
Understanding the ABB PBWP2550 Without-Plinth Configuration
The ABB PBWP2550 is intended for a specific bottom assembly arrangement within the System pro E power switchboard platform. Its defining characteristic is the manufacturer's WITH-OUT PLINTH designation, which identifies the intended configuration rather than establishing that a separate plinth is included in the product.
In electrical switchboard construction, a plinth is generally a base structure used beneath an enclosure for purposes such as raising the cabinet or accommodating particular installation requirements. A bottom installation arrangement without a plinth is selected where the switchboard design calls for that configuration instead. The appropriate choice depends on the complete enclosure design, installation environment and applicable ABB assembly instructions.
The designation BOT. identifies the bottom installation position. The PBWP2550 should therefore be distinguished from top panels, side panels, rear panels and other enclosure accessories, each of which serves a different role within the completed switchboard.
The specified W=250MM and D=500MM identify the compatible switchboard's 250 mm nominal width and 500 mm nominal depth. These values are configuration dimensions and should not be interpreted as independently verified physical measurements of the kit or its individual components.
The PBWP2550 is a mechanical installation accessory. It does not independently provide electrical switching, isolation, overload protection or short-circuit protection. Its role is to support the required bottom assembly arrangement within a correctly designed and constructed switchboard.
Because the manufacturer description does not specify the kit's individual components, materials, fixing hardware or ingress protection rating, these details should be confirmed using the applicable ABB System pro E power documentation before ordering or installation. The complete switchboard must be assembled using compatible components appropriate to its mechanical, electrical and environmental requirements.
Typical Applications
- ABB System pro E power low-voltage electrical switchboards.
- Compatible switchboard bottom assembly configurations without a plinth.
- Electrical distribution enclosure construction.
- Industrial low-voltage power distribution assemblies.
- Commercial building electrical distribution switchboards.
- Modular switchboard installations using coordinated ABB enclosure accessories.
- Professional electrical panel building and switchgear manufacturing.
- Electrical infrastructure projects requiring a specified bottom installation arrangement.
- Switchboard designs where a separate plinth is not part of the selected configuration.
- Compatible 250 mm wide and 500 mm deep System pro E power structures.
Technical Specifications
| Product group | System pro E power |
|---|---|
| Model / type | PBWP2550 |
| ABB order code | 1STQ007169A0000 |
| Manufacturer description | KIT BOT.WITH-OUT PLINTH W=250MM D=500MM |
| Product type | Bottom installation kit without plinth |
| Product category | Low-voltage switchboard enclosure accessories |
| Installation area | Bottom of compatible switchboard structure |
| Plinth configuration | Without plinth |
| Nominal switchboard width | 250 mm |
| Nominal switchboard depth | 500 mm |
| Compatible enclosure system | ABB System pro E power |
| Application | Low-voltage electrical distribution switchboards |
| Primary function | Supporting the specified bottom assembly configuration without a plinth |
| Accessory function | Mechanical switchboard assembly |
| Electrical switching function | Not applicable to the installation kit itself |
Frequently Asked Questions
What is the ABB PBWP2550 1STQ007169A0000 used for?
The ABB PBWP2550 is a bottom installation kit without plinth for compatible ABB System pro E power low-voltage switchboards. It supports the specified bottom assembly configuration in suitable enclosure structures.
What switchboard dimensions is the ABB PBWP2550 designed for?
The PBWP2550 is specified for compatible System pro E power switchboard structures with a nominal width of 250 mm and nominal depth of 500 mm. These dimensions identify the intended switchboard configuration rather than the independently verified physical dimensions of the kit.
What does WITHOUT PLINTH mean in the ABB PBWP2550 description?
WITHOUT PLINTH identifies a bottom installation configuration that does not incorporate a plinth as part of the specified arrangement. The PBWP2550 should be selected for compatible switchboard designs requiring this configuration, rather than assuming it is interchangeable with a bottom installation kit intended for use with a plinth.
Is the ABB PBWP2550 compatible with all System pro E power switchboards?
No universal compatibility is established by the manufacturer description. The PBWP2550 is specified for a 250 mm nominal width, 500 mm nominal depth and without-plinth bottom installation arrangement. Compatibility with the selected switchboard structure must be verified against ABB's technical and assembly documentation.
Does the ABB PBWP2550 include a plinth or all required fixing accessories?
The manufacturer identifies the PBWP2550 as a bottom installation kit without plinth, so a plinth should not be assumed to be included. The supplied description does not confirm the individual components or fixing accessories contained in the kit. Exact package contents should be checked with the supplier and relevant ABB documentation.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power accessories support coordinated construction of professional low-voltage electrical switchboards. The ABB PBWP2550 (1STQ007169A0000) provides a dedicated bottom installation kit without plinth for compatible 250 mm wide and 500 mm deep switchboard structures, helping panel builders select the appropriate mechanical assembly configuration for their electrical distribution projects.
