Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007168A0000 ABB PBWP2530 Bottom Enclosure Kit Without Plinth 250 x 300 mm
ABB PBWP2530 (1STQ007168A0000) is a System pro E power bottom enclosure installation kit without plinth, specified for compatible low-voltage switchgear cabinets with a nominal width of 250 mm and depth of 300 mm.
£59.40
Why Choose the ABB PBWP2530 Bottom Kit Without Plinth?
The ABB PBWP2530 (1STQ007168A0000) is a dedicated bottom enclosure installation kit without plinth for compatible ABB System pro E power low-voltage switchgear assemblies. Identified by ABB as PBWP2530 — KIT BOT. WITH-OUT PLINTH W=250MM D=300MM, this accessory is specified for enclosure arrangements with a nominal width of 250 mm and depth of 300 mm.
Part of the ABB System pro E power modular switchgear range, the PBWP2530 supports professional electrical panel construction where correct enclosure dimensions, base configuration and mechanical compatibility are important. Its without-plinth design distinguishes it from enclosure base arrangements that incorporate a separate plinth or pedestal system.
The kit is intended for the bottom section of a compatible enclosure, helping panel builders select the appropriate accessory for the specified cabinet footprint. The manufacturer designation does not establish a particular ingress protection rating, load capacity, material or included component list. These details, along with the exact installation method, should be verified against the relevant ABB technical documentation.
Key Advantages
- Purpose-designed ABB System pro E power bottom enclosure accessory.
- Specified for a 250 mm-wide and 300 mm-deep enclosure configuration.
- Without-plinth arrangement for compatible cabinet installations.
- Supports coordinated assembly of modular low-voltage switchgear enclosures.
- Provides a dedicated bottom installation kit rather than a general-purpose enclosure component.
- Helps panel builders identify the correct accessory for the intended cabinet footprint.
- Designed for integration with compatible ABB System pro E power enclosure components.
- Suitable for professional electrical distribution panel construction and assembly planning.
- Supports consistent component selection during compatible enclosure installation or refurbishment.
Key Features
- ABB PBWP2530 product designation.
- ABB order code: 1STQ007168A0000.
- System pro E power modular switchgear product group.
- Bottom enclosure kit configuration.
- Without-plinth manufacturer designation.
- 250 mm nominal compatible enclosure width.
- 300 mm nominal compatible enclosure depth.
- Designed for the bottom section of compatible electrical cabinets.
- Supports modular low-voltage switchgear enclosure construction.
- Application-specific accessory for professional switchboard assembly.
Dedicated Bottom Enclosure Integration Without a Plinth
Bottom enclosure components play an important role in modular switchgear construction. They form part of the cabinet's overall mechanical arrangement and must be selected to suit the enclosure system, nominal dimensions and intended installation configuration.
The ABB PBWP2530 is specifically identified as a bottom kit without plinth for a compatible 250 mm-wide and 300 mm-deep System pro E power enclosure. This makes it distinct from accessories intended for different cabinet dimensions or installations incorporating a plinth assembly.
The 250 mm and 300 mm dimensions describe the intended enclosure configuration rather than necessarily the measured external dimensions of the individual kit components. When selecting this accessory, confirm the complete cabinet arrangement and relevant ABB assembly drawings to ensure compatibility.
The term without plinth should not be interpreted as confirmation that the kit includes every component needed for a complete enclosure base. Any required mounting hardware, supports, sealing accessories or additional bottom components should be checked against ABB's bill of materials and installation instructions.
Typical Applications
- ABB System pro E power low-voltage switchgear assemblies.
- Industrial electrical distribution cabinets.
- Commercial electrical switchboards and distribution panels.
- Compatible enclosure installations that do not incorporate a plinth.
- Bottom enclosure assembly for designated 250 mm × 300 mm cabinet configurations.
- Modular electrical distribution enclosure construction.
- OEM electrical panel manufacturing and switchboard assembly.
- Compatible enclosure installation, maintenance and refurbishment projects.
- Professional electrical cabinet component selection and assembly planning.
Technical Specifications
| Product group | System pro E power |
|---|---|
| Product designation | PBWP2530 |
| ABB order code | 1STQ007168A0000 |
| Manufacturer description | KIT BOT. WITH-OUT PLINTH W=250MM D=300MM |
| Product type | Bottom enclosure installation kit |
| Installation location | Bottom of compatible enclosure |
| Plinth configuration | Without plinth |
| Compatible enclosure width | 250 mm |
| Compatible enclosure depth | 300 mm |
| Nominal enclosure footprint | 250 mm × 300 mm |
| Compatible enclosure system | ABB System pro E power |
| Application | Low-voltage electrical distribution and switchgear enclosure assembly |
Frequently Asked Questions
What is the ABB PBWP2530 used for?
The ABB PBWP2530 is a bottom enclosure installation kit for compatible ABB System pro E power low-voltage switchgear assemblies. It is specified for a 250 mm-wide and 300 mm-deep enclosure configuration without a plinth.
What does without plinth mean in the PBWP2530 designation?
The manufacturer's WITH-OUT PLINTH notation identifies a bottom enclosure arrangement that does not incorporate a plinth as part of the specified configuration. It does not establish whether a separate plinth or other accessories can be fitted in a different arrangement.
Which enclosure dimensions are specified for the ABB PBWP2530?
The PBWP2530 is designated for compatible System pro E power enclosures with a nominal width of 250 mm and depth of 300 mm. These dimensions describe the intended enclosure footprint rather than necessarily the external measurements of the kit components.
Does the ABB PBWP2530 have an IP protection rating?
The supplied ABB product designation does not specify an ingress protection rating for the PBWP2530. The protection rating of a completed enclosure depends on the full cabinet configuration, compatible components and correct installation. Consult ABB's technical documentation for the intended assembly.
Does the ABB PBWP2530 include a plinth or all required mounting components?
The product is explicitly designated without plinth. The exact contents of the bottom kit, including any mounting hardware or additional installation components, should be verified against ABB's official product documentation before ordering.
Designed for Professional Electrical Panel Builders
ABB System pro E power accessories provide application-specific components for modular low-voltage switchgear construction. The PBWP2530 bottom kit without plinth supports compatible 250 mm-wide and 300 mm-deep enclosure arrangements, helping electrical panel builders select the appropriate bottom installation configuration for their cabinet design.
