1STQ007163B0000 ABB Triple XT5 3/4-Pole Withdrawable Motorised Kit Vertical W1000

Why Choose the ABB 1STQ007163B0000 Triple XT5 Withdrawable Motorised Installation Kit?

The ABB 1STQ007163B0000 is a dedicated three-position XT5 withdrawable motorised circuit-breaker installation kit designed for compatible ABB Tmax XT5 moulded case circuit-breaker arrangements within the ABB System Pro E Power modular switchboard system. This original ABB accessory supports the integration of multiple compatible circuit-breaker installations into professional low-voltage electrical distribution assemblies.

Identified by ABB as 3 XT5 KIT 3-4P WITH. MOT VERT.W=1000MM, the product is specified for an arrangement involving three XT5 installation positions, compatible three-pole or four-pole circuit breakers, a withdrawable mounting configuration and motorised operation compatibility. The manufacturer also specifies a vertical installation orientation and a 1000 mm nominal switchboard width.

Part of the ABB System Pro E Power range, the 1STQ007163B0000 is intended for switchboard manufacturers, electrical panel builders and engineers planning multi-breaker distribution assemblies. Its dedicated configuration helps identify the appropriate installation arrangement where three compatible XT5 positions are required within a coordinated ABB modular switchboard structure.

Key Advantages

• Original ABB System Pro E Power accessory for compatible modular low-voltage switchboards.
• Three XT5 installation positions identified by the manufacturer's product designation.
• ABB Tmax XT5 compatibility for the specified circuit-breaker arrangement.
• Three-pole and four-pole configuration supports compatible XT5 breaker variants.
• Withdrawable installation design accommodates the corresponding circuit-breaker mounting arrangement.
• Motorised operation compatibility supports installations using suitable electrically operated XT5 equipment.
• Vertical mounting orientation for the designated switchboard layout.
• Designed for a 1000 mm nominal switchboard width.
• Supports coordinated planning of multiple circuit-breaker positions within a compatible enclosure.
• Helps simplify accessory identification for professional switchboard assembly and maintenance.
• ABB order code 1STQ007163B0000 enables accurate product specification and procurement.

Key Features

• ABB System Pro E Power modular switchboard accessory.
• Three-position XT5 installation kit as identified by the manufacturer.
• Designed for compatible ABB Tmax XT5 moulded case circuit breakers.
• 3-pole / 4-pole compatibility designation.
• Withdrawable circuit-breaker configuration identified by the WITH. designation.
• Motorised operating arrangement identified by the MOT designation.
• Vertical installation orientation identified by the VERT. designation.
• 1000 mm nominal switchboard width.
• Supports the integration of multiple compatible circuit-breaker arrangements.
• Designed for coordinated use with compatible ABB System Pro E Power enclosure components.
• Suitable for professional low-voltage power distribution assembly construction.
• ABB manufacturer reference 1STQ007163B0000 for precise identification and replacement selection.

Engineered for Three Vertical XT5 Withdrawable Motorised Installations

The ABB Tmax XT5 family comprises moulded case circuit breakers used in low-voltage electrical distribution systems. Depending on the selected breaker version and accessories, XT5 equipment can be incorporated into fixed, plug-in or withdrawable installation arrangements to meet different mechanical and operational requirements.

The ABB 1STQ007163B0000 is distinguished by the manufacturer's 3 XT5 KIT designation. This identifies a kit configuration associated with three XT5 installation positions, making it relevant to compatible switchboard layouts where multiple circuit-breaker arrangements must be accommodated within the specified cabinet width.

The three-pole or four-pole compatibility allows the kit to be considered for suitable XT5 circuit-breaker configurations. The exact combination of breakers, their individual dimensions and any restrictions on mixing pole configurations must be checked against ABB's assembly documentation before installation.

The withdrawable designation identifies a circuit-breaker mounting arrangement intended for compatible withdrawal equipment. When correctly configured, a withdrawable system provides the mechanical and electrical interfaces necessary for the operating positions permitted by its design. This can support maintenance planning and equipment accessibility, subject to the manufacturer's safety and operating procedures.

The motorised designation identifies compatibility with suitable motor-operated circuit-breaker arrangements. Depending on the selected XT5 equipment and separately required accessories, motorised operation may be incorporated into a wider electrical distribution or control system. The installation kit itself should not be assumed to contain the motor operators or provide electrically operated switching independently.

The specified vertical mounting orientation is an important mechanical parameter. The 1STQ007163B0000 is intended for the corresponding vertical XT5 arrangement within a compatible System Pro E Power switchboard, rather than a horizontal mounting configuration.

The 1000 mm nominal switchboard width identifies the intended cabinet configuration. It should not be interpreted as the physical width of the supplied components or as confirmation of the available compartment height, depth or individual circuit-breaker clearances. These dimensions must be verified against the complete ABB switchboard design.

Unlike XT5 installation accessories that explicitly identify a current class in their manufacturer designation, the supplied description for 1STQ007163B0000 does not state a current rating. The applicable circuit-breaker ratings and completed assembly current-carrying capability must therefore be established from the selected equipment and relevant ABB technical documentation.

As an installation accessory kit, the 1STQ007163B0000 should not be treated as a complete three-breaker distribution assembly. The inclusion of circuit breakers, motor operators, withdrawal mechanisms, connection components and other mechanical or electrical accessories must be confirmed from ABB's supplied-content information.

Typical Applications

• ABB System Pro E Power modular low-voltage switchboards.
• Compatible three-position ABB Tmax XT5 installation arrangements.
• Three-pole and four-pole withdrawable XT5 circuit-breaker configurations.
• Industrial electrical power distribution assemblies.
• Commercial building main and sub-distribution switchboards.
• Multi-circuit-breaker distribution compartments.
• Vertical circuit-breaker mounting in compatible switchboard structures.
• Electrical distribution cabinets with a 1000 mm nominal width configuration.
• Switchboard arrangements incorporating suitable motor-operated XT5 equipment.
• Professional electrical panel manufacturing and assembly.
• Compatible switchboard refurbishment, maintenance and installation accessory replacement.