Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ007161B0000 is a System pro E power N3 installation accessory for compatible three-pole or four-pole Tmax XT5 400 A or 630 A fixed circuit breakers, designed for vertical mounting in 800 mm wide switchboard structures with a non-segregated configuration.
£320.64
The ABB 1STQ007161B0000 is an N3 XT5 circuit breaker installation accessory from the ABB System pro E power range. Designed for compatible ABB Tmax XT5 moulded case circuit breaker arrangements, this component supports the mechanical integration of circuit breakers into professional low-voltage electrical distribution switchboards.
Identified by ABB as N3 XT5 400_630A 3_4P F_V_W800 T F NO SEG, the product is specified for compatible ABB Tmax XT5 circuit breakers in 400 A and 630 A configurations, with support for three-pole and four-pole arrangements. The manufacturer designation identifies a fixed installation configuration, vertical mounting orientation and compatibility with a nominal 800 mm wide switchboard structure.
The designation also identifies an N3 arrangement and a NO SEG configuration, indicating a non-segregated installation variant. As part of the ABB System pro E power modular platform, the 1STQ007161B0000 is intended for panel builders, switchgear manufacturers and electrical contractors selecting installation components for suitable XT5 circuit breaker assemblies.
The ABB 1STQ007161B0000 is identified by a manufacturer designation that defines several important installation characteristics. These characteristics should be considered together when selecting components for a compatible ABB System pro E power switchboard.
N3 identifies the installation arrangement specified by ABB. This designation should be matched against the relevant System pro E power configuration and assembly documentation to confirm suitability for the intended switchboard design.
XT5 400_630A identifies compatibility with the ABB Tmax XT5 circuit breaker family in the designated 400 A and 630 A configurations. These values describe the intended circuit breaker arrangements rather than an electrical current rating of the mechanical installation accessory itself.
3_4P identifies compatibility with suitable three-pole and four-pole circuit breakers. The correct pole configuration must be selected according to the electrical distribution design, conductor arrangement and applicable protection requirements.
F_V_W800 identifies a fixed, vertical installation arrangement for a compatible switchboard structure with a nominal width of 800 mm. Fixed mounting differs from plug-in and withdrawable circuit breaker arrangements. The width designation refers to the intended switchboard configuration and should not be interpreted as the independently verified physical width of the installation accessory.
NO SEG identifies the specified non-segregated configuration. This designation is relevant when selecting the correct installation variant for a switchboard design. It should not be interpreted as a complete statement of the internal separation classification of the finished switchboard, which depends on the complete assembly and its construction.
The additional T F codes are retained from the authoritative ABB designation. Their detailed application should be verified against the relevant ABB technical documentation rather than assigned an unsupported meaning.
The 1STQ007161B0000 is a mechanical installation accessory, not a complete circuit breaker. It does not independently provide overload protection, short-circuit protection, electrical isolation or switching functions. These functions depend on the selected XT5 circuit breaker and the completed electrical installation.
| Product group | System pro E power |
|---|---|
| ABB order code | 1STQ007161B0000 |
| Manufacturer description | N3 XT5 400_630A 3_4P F_V_W800 T F NO SEG |
| Product type | Circuit breaker installation accessory |
| Product category | Low-voltage switchboard installation accessories |
| Installation configuration | N3 |
| Compatible circuit breaker family | ABB Tmax XT5 |
| Designated current configurations | 400 A / 630 A |
| Compatible pole configurations | 3 or 4 |
| Circuit breaker mounting arrangement | Fixed |
| Installation orientation | Vertical |
| Nominal switchboard width | 800 mm |
| Segregation designation | NO SEG |
| Additional manufacturer configuration codes | T F |
| Compatible switchboard system | ABB System pro E power |
| Application | Low-voltage electrical distribution switchboards |
| Primary function | Supporting the mechanical installation of compatible fixed-mounted XT5 circuit breaker assemblies in the specified switchboard configuration |
The ABB 1STQ007161B0000 is a System pro E power installation accessory intended for compatible ABB Tmax XT5 fixed circuit breaker assemblies. It supports an N3 vertical installation configuration in a suitable 800 mm nominal width switchboard structure.
The manufacturer designation specifies compatible ABB Tmax XT5 circuit breakers in 400 A or 630 A configurations, with three-pole or four-pole arrangements. The selected breaker must also be suitable for the specified fixed, vertical installation configuration.
F_V_W800 identifies a fixed mounting arrangement, vertical installation orientation and compatibility with a switchboard structure having a nominal width of 800 mm. The width designation does not independently specify the physical dimensions of the accessory.
NO SEG identifies the non-segregated installation configuration specified by ABB. The internal separation requirements of the complete switchboard must be assessed separately using the applicable assembly design and technical documentation.
The ABB 1STQ007161B0000 is identified as an installation accessory, not a complete circuit breaker assembly. Inclusion of a circuit breaker, mounting hardware or other associated components should not be assumed. Exact package contents and compatibility should be confirmed with the supplier and relevant ABB documentation.
ABB System pro E power accessories support coordinated construction of professional low-voltage electrical switchboards. The ABB 1STQ007161B0000 provides an application-specific N3 XT5 fixed vertical installation arrangement for compatible 400 A or 630 A, three-pole or four-pole circuit breakers in suitable 800 mm wide switchboard structures, with the specified NO SEG configuration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.