Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007158A0000 ABB PTBO8070 IP65 Open Top/Bottom Panel 800 x 700 mm System pro E Power
ABB PTBO8070 open top/bottom enclosure panel, order code 1STQ007158A0000, is an 800 x 700 mm System pro E Power accessory designed for compatible IP65 low-voltage electrical distribution switchboards and cable entry arrangements.
£126.66
Why Choose the ABB PTBO8070 IP65 Open Top/Bottom Panel?
The ABB PTBO8070, manufacturer order code 1STQ007158A0000, is an IP65 open top/bottom enclosure panel designed for compatible ABB System pro E Power modular low-voltage electrical distribution switchboards. With nominal dimensions of 800 mm wide × 700 mm deep, this enclosure accessory provides a dedicated top or bottom covering arrangement with an opening for cable entry and associated installation requirements.
As part of the ABB System pro E Power enclosure accessory range, the PTBO8070 supports modular switchboard construction by providing an open panel configuration for compatible upper or lower enclosure positions. Its purpose-designed construction enables electrical panel builders to accommodate suitable cable entry arrangements while maintaining a coordinated enclosure structure.
Designed for IP65 enclosure applications, the ABB PTBO8070 is intended for switchboard assemblies requiring enhanced protection against dust and water ingress. The panel's 800 mm width and 700 mm depth make it suitable for corresponding System pro E Power structures, with the final protection rating dependent on correct installation and appropriate sealing of the complete enclosure assembly.
Key Advantages
- Designed specifically for ABB System pro E Power modular switchboards.
- IP65 enclosure application supports demanding electrical installation environments.
- 800 mm width × 700 mm depth for compatible switchboard structures.
- Open top/bottom configuration supports cable entry and routing arrangements.
- Suitable for installation at compatible upper or lower enclosure positions.
- Supports the construction of dust-tight and water-jet-resistant switchboard assemblies when correctly sealed.
- Modular design simplifies integration with coordinated ABB enclosure accessories.
- Helps electrical panel builders create organised and accessible cable entry arrangements.
- Suitable for industrial and commercial low-voltage electrical distribution installations.
Key Features
- ABB System pro E Power modular switchboard accessory.
- PTBO8070 manufacturer model designation.
- Open top/bottom enclosure panel.
- IP65 intended enclosure protection classification.
- 800 mm nominal width.
- 700 mm nominal depth.
- Open panel arrangement for compatible cable entry configurations.
- Designed for installation at the top or bottom of compatible switchboard structures.
- Supports integration with appropriate cable entry and sealing accessories.
- Suitable for modular low-voltage distribution board construction.
- Compatible with appropriately dimensioned ABB System pro E Power enclosures.
- Manufacturer order code 1STQ007158A0000.
Technical Specifications
- Manufacturer: ABB
- Series: System pro E Power
- Model: PTBO8070
- ABB order code: 1STQ007158A0000
- Product type: Open top/bottom enclosure panel
- Product category: Switchboard Enclosure Accessories
- Intended protection classification: IP65
- Nominal width: 800 mm
- Nominal depth: 700 mm
- Panel configuration: Open
- Installation position: Top or bottom of compatible enclosure
- Compatible enclosure system: ABB System pro E Power
- Solid particle protection: IP6X, dust-tight when correctly assembled
- Water ingress protection: IPX5, protection against water jets when correctly assembled
- Application: Low-voltage electrical distribution switchboards
- Manufacturer product group: System pro E Power
Reliable Cable Entry Integration for IP65 Modular Switchboards
The ABB PTBO8070 provides an open top or bottom covering arrangement for compatible System pro E Power electrical switchboard structures. Open enclosure panels are used where cable entry or other suitable installation provisions are required, allowing electrical engineers to configure the enclosure around incoming and outgoing electrical connections. The open configuration must be completed with appropriate compatible components to maintain the intended enclosure protection.
The IP65 classification denotes dust-tight protection and resistance to water jets under the applicable test conditions. Because the PTBO8070 incorporates an opening, the panel alone does not provide a complete IP65 barrier. The finished switchboard must incorporate suitable cable entry plates, glands, seals and other required enclosure components, installed according to ABB instructions, to achieve the specified protection level.
Typical Applications
- ABB System pro E Power modular low-voltage switchboards.
- IP65 electrical distribution enclosure assemblies.
- Top-mounted cable entry arrangements in compatible switchboards.
- Bottom-mounted cable entry arrangements in electrical distribution cabinets.
- Industrial main electrical distribution boards.
- Commercial building power distribution installations.
- Electrical switchgear and controlgear enclosure construction.
- Modular switchboard manufacturing and panel building.
- Electrical installations requiring appropriately sealed cable entry arrangements.
Frequently Asked Questions
What is the ABB PTBO8070 used for?
The ABB PTBO8070 is an IP65 open top/bottom enclosure panel designed for compatible ABB System pro E Power modular electrical switchboards. It provides an opening for suitable cable entry arrangements at the top or bottom of the enclosure.
What are the dimensions of the ABB PTBO8070?
The PTBO8070 is designed for a nominal enclosure width of 800 mm and depth of 700 mm.
What is the protection rating of the ABB PTBO8070?
The PTBO8070 is specified for IP65 enclosure applications. This classification provides dust-tight protection and resistance to water jets when the complete enclosure and cable entry arrangements are correctly assembled and sealed.
Which ABB enclosure system is compatible with the PTBO8070?
The PTBO8070 is part of the ABB System pro E Power modular low-voltage switchboard range and is intended for compatible 800 mm wide and 700 mm deep enclosure structures.
Can the ABB PTBO8070 be installed at the top or bottom of a switchboard?
Yes. The PTBO8070 is designated as an open top/bottom panel for compatible System pro E Power switchboard configurations.
What is the difference between an open and a blind top/bottom panel?
An open panel, such as the PTBO8070, incorporates an opening for suitable cable entry or associated installation arrangements. A blind panel provides a solid covering without an intentional cable entry opening.
Does the ABB PTBO8070 provide IP65 protection on its own?
No. The PTBO8070 is an open enclosure component. Achieving IP65 protection requires the complete switchboard assembly, including appropriate cable entry components and seals, to be correctly configured and installed.
Is the ABB PTBO8070 suitable for industrial electrical distribution panels?
Yes. The PTBO8070 is intended for compatible ABB System pro E Power low-voltage distribution switchboards used in industrial and commercial electrical installations requiring suitable cable entry arrangements.
Can the ABB PTBO8070 be used in outdoor electrical installations?
The PTBO8070 is specified for IP65 enclosure applications, but outdoor suitability depends on the complete enclosure design, environmental exposure, corrosion protection, cable entry sealing and installation requirements. The panel alone does not establish outdoor suitability.
What is the ABB order code for the PTBO8070?
The manufacturer order code is 1STQ007158A0000, corresponding to the PTBO8070 IP65 open top/bottom panel.
Trusted by Electrical Panel Builders and Switchboard Engineers
ABB System pro E Power enclosure accessories are designed to support professional modular low-voltage electrical distribution installations. The ABB PTBO8070 IP65 open top/bottom panel, order code 1STQ007158A0000, provides a coordinated 800 mm × 700 mm enclosure solution for compatible switchboard structures, helping electrical contractors, panel builders and switchboard manufacturers create organised cable entry arrangements and protected electrical distribution assemblies.
