Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007155B0000 ABB XT5 4P 400 A Plug-In RCD Installation Kit Vertical W800
ABB 1STQ007155B0000 is a System pro E power vertical installation kit for a compatible four-pole Tmax XT5 400 A plug-in circuit breaker with an associated residual current protection arrangement in an 800 mm wide low-voltage switchboard.
£268.17
Why Choose the ABB 1STQ007155B0000 XT5 4-Pole Plug-In RCD Installation Kit?
The ABB 1STQ007155B0000 is a dedicated XT5 four-pole plug-in circuit breaker installation kit with residual current device (RCD) compatibility, designed for integrating suitable ABB Tmax XT5 moulded case circuit breaker assemblies into professional low-voltage electrical switchboards. Part of the ABB System pro E power range, this accessory supports coordinated installation within compatible modular electrical distribution structures.
Identified by ABB as XT5 KIT 4P PLUG IN+RCD(400A)VER.W=800MM, the kit is specified for a compatible four-pole ABB Tmax XT5 circuit breaker in a 400 A configuration. The manufacturer designation identifies a plug-in mounting arrangement, compatibility with an appropriate residual current protection arrangement, and a vertical installation orientation.
Designed for compatible 800 mm wide ABB System pro E power switchboard structures, the 1STQ007155B0000 provides an application-specific installation solution for electrical panel builders, switchgear manufacturers and industrial electrical contractors. It supports the mechanical integration of suitable XT5 equipment and associated residual current protection components within a coordinated ABB switchboard assembly.
Key Advantages
- Dedicated ABB Tmax XT5 installation kit for System pro E power switchboards.
- Specified for compatible four-pole XT5 circuit breaker configurations.
- Designed for the designated 400 A circuit breaker arrangement.
- Supports plug-in circuit breaker installation using suitable connection equipment.
- Designed for integration with a compatible residual current protection arrangement.
- Intended for vertical installation within suitable switchboard structures.
- Compatible with the specified 800 mm nominal switchboard width.
- Supports coordinated mechanical integration within the ABB System pro E power platform.
- Helps panel builders identify the appropriate installation arrangement for XT5 equipment incorporating residual current protection.
- Suitable for professional industrial and commercial low-voltage electrical distribution projects.
Key Features
- ABB System pro E power series installation accessory.
- ABB order code: 1STQ007155B0000.
- Manufacturer designation: XT5 KIT 4P PLUG IN+RCD(400A)VER.W=800MM.
- Compatible circuit breaker family: ABB Tmax XT5.
- Four-pole configuration identified by the 4P designation.
- 400 A configuration specified in the manufacturer description.
- Plug-in mounting arrangement for compatible XT5 equipment.
- RCD compatibility for an appropriate residual current protection arrangement.
- Vertical installation orientation identified by VER.
- 800 mm nominal switchboard width identified by W=800MM.
- Application-specific mechanical installation solution for compatible ABB low-voltage switchboard assemblies.
Four-Pole Plug-In XT5 Installation with Residual Current Protection Compatibility
The ABB 1STQ007155B0000 is intended for switchboard installations using a compatible four-pole ABB Tmax XT5 plug-in circuit breaker. Unlike a fixed-mounted arrangement, a plug-in configuration uses a suitable connection system that allows the circuit breaker to be removed from its installed position in accordance with the manufacturer's instructions. The correct plug-in components and mounting accessories must be selected for the intended breaker assembly.
The manufacturer's RCD designation identifies an installation arrangement intended for use with compatible residual current protection equipment. Residual current protection is used to detect an imbalance between the currents flowing through the monitored conductors and, when appropriately configured, initiate disconnection under specified fault conditions.
Importantly, the 1STQ007155B0000 is an installation kit rather than a residual current protection device. It does not independently detect earth leakage, provide residual current tripping or perform the electrical switching and protection functions of a circuit breaker. Those functions depend on the separately specified compatible equipment and the completed electrical assembly.
The four-pole designation is particularly relevant when selecting the correct breaker and associated residual current protection arrangement. Panel builders must verify that all required conductors are accommodated by the selected protection equipment and that the installation complies with the applicable electrical design requirements.
The specified vertical orientation and 800 mm nominal switchboard width define the intended System pro E power installation configuration. The width designation refers to the compatible switchboard structure and should not be interpreted as an independently verified physical dimension of the installation kit.
Before assembly, installers should confirm the selected XT5 breaker variant, four-pole configuration, 400 A arrangement, plug-in connection equipment, compatible residual current protection accessories and mounting requirements against the relevant ABB technical documentation.
Typical Applications
- ABB System pro E power low-voltage electrical switchboards.
- Compatible four-pole ABB Tmax XT5 plug-in circuit breaker installations.
- Electrical distribution assemblies using suitable 400 A XT5 configurations.
- Switchboard arrangements incorporating compatible residual current protection equipment.
- Industrial low-voltage power distribution systems.
- Commercial building electrical distribution switchboards.
- Electrical infrastructure installations requiring coordinated circuit breaker and residual current protection arrangements.
- Modular switchboard construction using compatible ABB installation accessories.
- Professional electrical panel building and switchgear manufacturing.
- Vertical XT5 installations in compatible 800 mm wide switchboard structures.
Technical Specifications
| Product group | System pro E power |
|---|---|
| ABB order code | 1STQ007155B0000 |
| Manufacturer description | XT5 KIT 4P PLUG IN+RCD(400A)VER.W=800MM |
| Product type | Circuit breaker installation kit |
| Product category | Low-voltage switchboard installation accessories |
| Compatible circuit breaker family | ABB Tmax XT5 |
| Compatible pole configuration | 4-pole |
| Designated current configuration | 400 A |
| Circuit breaker mounting configuration | Plug-in |
| Associated protection arrangement | Residual current device (RCD) compatible |
| Installation orientation | Vertical |
| Nominal switchboard width | 800 mm |
| Compatible switchboard platform | ABB System pro E power |
| Application | Low-voltage electrical distribution switchboards |
| Primary function | Mechanical integration of a compatible four-pole XT5 plug-in circuit breaker assembly with an associated residual current protection arrangement |
Frequently Asked Questions
What is the ABB 1STQ007155B0000 used for?
The ABB 1STQ007155B0000 is an installation kit for integrating a compatible four-pole ABB Tmax XT5 plug-in circuit breaker with an associated residual current protection arrangement into an ABB System pro E power low-voltage switchboard.
Which circuit breaker configuration is compatible with the ABB 1STQ007155B0000?
The kit is specified for a compatible four-pole ABB Tmax XT5 circuit breaker in the designated 400 A configuration. The selected breaker must also be suitable for plug-in mounting and the intended residual current protection arrangement.
What do PLUG IN and RCD mean in the ABB product description?
PLUG IN identifies a circuit breaker installation arrangement using a compatible plug-in connection system. RCD refers to a residual current device or associated residual current protection arrangement. The kit is designed for mechanical integration with suitable equipment and does not independently provide residual current protection.
What does VER.W=800MM mean for this XT5 installation kit?
The VER.W=800MM designation identifies a vertical installation arrangement intended for a compatible ABB System pro E power switchboard structure with a nominal width of 800 mm. It does not independently specify the physical dimensions of the installation kit.
Does the ABB 1STQ007155B0000 include the XT5 circuit breaker and RCD?
The ABB 1STQ007155B0000 is identified as an installation kit, not a complete circuit breaker and residual current protection assembly. The inclusion of a circuit breaker, RCD or residual current release, plug-in connection equipment or other accessories should not be assumed. Exact package contents must be confirmed with the supplier and applicable ABB documentation.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power installation accessories support coordinated construction of professional low-voltage electrical switchboards. The ABB 1STQ007155B0000 provides a dedicated installation solution for a compatible four-pole Tmax XT5 plug-in circuit breaker in a 400 A configuration, with residual current protection compatibility and vertical mounting in suitable 800 mm wide switchboard structures.
