Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007154B0000 ABB XT5 3/4-Pole Plug-In RHD Kit 400 A Vertical W800
ABB 1STQ007154B0000 System Pro E Power XT5 plug-in installation kit with RHD configuration for compatible three-pole or four-pole Tmax XT5 circuit breakers in the 400 A current class, designed for vertical mounting in an 800 mm nominal width switchboard.
£282.22
Why Choose the ABB 1STQ007154B0000 XT5 Plug-In Installation Kit with RHD?
The ABB 1STQ007154B0000 is a dedicated XT5 plug-in circuit-breaker installation kit with RHD configuration, designed for compatible ABB Tmax XT5 moulded case circuit breakers within the ABB System Pro E Power modular switchboard system. This original ABB accessory supports the integration of suitable circuit-breaker equipment into professional low-voltage electrical distribution assemblies.
Identified by ABB as XT5 KIT 3-4P PLUG IN+RHD(400A)VERW=800MM, the kit is specified for compatible three-pole or four-pole XT5 circuit breakers in a plug-in installation arrangement with the manufacturer's RHD configuration. Its designation also identifies a 400 A current class, vertical mounting orientation and 800 mm nominal switchboard width.
Part of the ABB System Pro E Power range, the 1STQ007154B0000 is intended for electrical panel builders, switchboard manufacturers and engineers who require a coordinated installation solution for plug-in XT5 equipment. Its defined mechanical configuration helps support accurate accessory selection, organised compartment layouts and integration with compatible ABB switchboard components.
Key Advantages
- Original ABB System Pro E Power accessory designed for compatible modular low-voltage switchboards.
- ABB Tmax XT5 compatibility for the specified circuit-breaker installation arrangement.
- Three-pole and four-pole configuration supports compatible XT5 breaker variants.
- Plug-in installation design accommodates the corresponding circuit-breaker connection arrangement.
- RHD configuration provides a defined manufacturer-specific installation variant.
- 400 A current-class designation for the intended XT5 installation.
- Vertical mounting orientation for the specified switchboard compartment layout.
- Designed for a 800 mm nominal switchboard width.
- Supports coordinated switchboard construction, equipment accessibility and maintenance planning.
- Dedicated ABB order code helps simplify product identification, procurement and replacement selection.
Key Features
- ABB System Pro E Power modular switchboard accessory.
- XT5 installation kit for compatible ABB Tmax XT5 moulded case circuit breakers.
- 3-pole / 4-pole compatibility designation.
- Plug-in circuit-breaker arrangement identified by the manufacturer's PLUG IN designation.
- RHD manufacturer configuration for the specified installation variant.
- 400 A specified current class.
- Vertical installation orientation identified by the manufacturer's VER designation.
- 800 mm nominal switchboard width.
- Designed for coordinated integration with compatible System Pro E Power enclosure components.
- Suitable for professional low-voltage power distribution assembly construction.
- Supports installation planning for plug-in circuit-breaker equipment and associated mechanical accessories.
- ABB order code 1STQ007154B0000 for accurate identification and specification.
Engineered for Vertical XT5 Plug-In Circuit-Breaker Integration
The ABB Tmax XT5 moulded case circuit-breaker family is used in low-voltage electrical distribution systems requiring circuit protection and switching functionality. Depending on the selected breaker version and accessories, XT5 equipment can be incorporated into fixed, plug-in or withdrawable installation arrangements.
The ABB 1STQ007154B0000 is specifically designated for a plug-in XT5 configuration supporting compatible three-pole or four-pole circuit breakers. This distinguishes it from installation kits intended for fixed-mounted or withdrawable versions and makes the plug-in designation an important consideration during equipment selection.
A compatible plug-in circuit-breaker arrangement uses a designated connection system that allows the circuit breaker to be fitted to and removed from its associated mounting arrangement according to the manufacturer's procedures. This can support equipment replacement and maintenance planning, although all installation and removal operations must follow the applicable electrical safety requirements.
The manufacturer's RHD designation identifies an additional configuration associated with the plug-in installation kit. The exact mechanical function, operating arrangement and compatibility requirements of the RHD variant should be verified using ABB's relevant technical drawings and installation instructions. The designation alone should not be treated as confirmation that a particular operating handle or mechanism is included.
The specified vertical mounting orientation is important when selecting the appropriate switchboard compartment arrangement. The 1STQ007154B0000 is intended for the corresponding vertical installation configuration rather than a horizontal XT5 mounting layout.
The 800 mm nominal switchboard width identifies the intended System Pro E Power cabinet configuration. This dimension should not be interpreted as the physical width of the supplied installation components or as confirmation of the complete compartment height and depth.
The 400 A designation identifies the current class associated with this installation arrangement. It does not independently determine the rated current of the completed switchboard or confirm the electrical rating of every compatible XT5 circuit breaker. Final current-carrying capability depends on the selected protective device, electrical connections, installation conditions and verified assembly design.
The ABB 1STQ007154B0000 is an installation accessory kit rather than a complete protective circuit breaker. The inclusion of the circuit breaker, plug-in connection components, operating accessories or other mechanical parts should not be assumed without checking the manufacturer's supplied-content documentation.
Typical Applications
- ABB System Pro E Power modular low-voltage switchboards.
- Compatible ABB Tmax XT5 plug-in circuit-breaker installations.
- Three-pole and four-pole XT5 distribution equipment arrangements.
- Industrial electrical power distribution assemblies.
- Commercial building main and sub-distribution switchboards.
- Vertical circuit-breaker mounting in compatible switchboard compartments.
- Electrical distribution cabinets with an 800 mm nominal width configuration.
- Switchboard designs requiring the specified plug-in and RHD accessory arrangement.
- Professional electrical panel manufacturing and assembly.
- Compatible switchboard maintenance, refurbishment and installation accessory replacement.
Technical Specifications
| Product group | System Pro E Power |
|---|---|
| ABB order code | 1STQ007154B0000 |
| Manufacturer designation | XT5 KIT 3-4P PLUG IN+RHD(400A)VERW=800MM |
| Product type | Plug-in circuit-breaker installation kit with RHD configuration |
| Product category | Circuit-breaker mounting and installation accessories |
| Compatible circuit-breaker family | ABB Tmax XT5 |
| Pole configuration | 3-pole / 4-pole |
| Installation version | Plug-in |
| Manufacturer accessory configuration | RHD |
| Specified current class | 400 A |
| Mounting orientation | Vertical |
| Nominal switchboard width | 800 mm |
| Compatible switchboard system | ABB System Pro E Power |
| Primary application | Low-voltage electrical distribution assemblies |
| Equipment classification | Switchboard installation accessory |
Frequently Asked Questions
What is the ABB 1STQ007154B0000 used for?
The ABB 1STQ007154B0000 is an XT5 plug-in installation kit with RHD configuration, designed for compatible three-pole or four-pole ABB Tmax XT5 circuit breakers within System Pro E Power low-voltage switchboards.
Which circuit breakers are compatible with the ABB 1STQ007154B0000?
The kit is designated for compatible ABB Tmax XT5 three-pole and four-pole circuit breakers in a plug-in configuration associated with the 400 A current class. Exact breaker versions and connection accessory compatibility must be confirmed using ABB's technical documentation.
What does PLUG IN+RHD mean in the product designation?
PLUG IN identifies the intended plug-in circuit-breaker installation arrangement, while RHD identifies an additional ABB manufacturer configuration. The exact function and supplied components associated with RHD should be confirmed against the relevant ABB product and installation documentation.
What mounting orientation and switchboard width are specified?
The ABB 1STQ007154B0000 is specified for vertical installation in a compatible ABB System Pro E Power switchboard arrangement with a 800 mm nominal width. The product also carries a 400 A current-class designation.
Does the ABB 1STQ007154B0000 include a complete XT5 circuit breaker?
The ABB 1STQ007154B0000 is identified as a circuit-breaker installation accessory kit, not a complete protective circuit breaker. The inclusion of an XT5 breaker, operating handle, plug-in connections or other accessories should not be assumed. Confirm the supplied contents and any separately required components using ABB's product documentation.
Trusted ABB Low-Voltage Switchboard Engineering
ABB System Pro E Power accessories support coordinated, modular and maintainable low-voltage electrical switchboard construction. The 1STQ007154B0000 XT5 installation kit provides a dedicated solution for compatible three-pole and four-pole plug-in circuit-breaker arrangements with the manufacturer's RHD configuration, specified for the 400 A current class and vertical installation within an 800 mm nominal width switchboard.
