Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ007152B0000 is a System pro E power XT5 circuit breaker installation kit for compatible three-pole or four-pole 400 A equipment configurations with a right-hand rotary handle drive arrangement, designed for vertical installation in 800 mm-wide low-voltage switchgear assemblies.
£290.59
The ABB 1STQ007152B0000 is a dedicated XT5 circuit breaker installation kit designed for compatible ABB System pro E power low-voltage switchgear assemblies. Identified by ABB as XT5 KIT 3-4P WITH+RHD(400A)VER.W=800MM, this accessory supports the integration of compatible ABB XT5 moulded-case circuit breakers in three-pole or four-pole configurations with a right-hand rotary handle drive (RHD) arrangement.
Part of the ABB System pro E power modular switchgear range, the kit provides an application-specific installation solution for professional electrical panel builders, switchboard manufacturers and industrial power distribution specialists. Its vertical mounting configuration is intended for switchgear layouts requiring compatible XT5 equipment to be positioned vertically within the designated assembly space.
The kit is specified for 400 A circuit breaker equipment configurations and an 800 mm nominal assembly width. Its manufacturer designation also includes WITH+RHD, identifying the relevant ABB installation configuration and rotary handle drive arrangement. Exact device compatibility, associated operating components and supplied kit contents should be confirmed using the applicable ABB technical documentation.
ABB XT5 moulded-case circuit breakers are used in low-voltage electrical distribution systems for switching and circuit protection when equipped with the appropriate protective devices and accessories. Integrating these circuit breakers into modular switchgear requires an installation arrangement suited to the selected pole configuration, operating mechanism and enclosure layout.
The ABB 1STQ007152B0000 is specifically designated for vertical installation of compatible XT5 three-pole or four-pole equipment with a right-hand rotary handle drive arrangement. Its 800 mm assembly width distinguishes it from otherwise similar XT5 installation kits specified for narrower switchgear configurations. The width refers to the intended assembly arrangement and should not automatically be interpreted as the kit's measured external width.
The 400 A designation identifies the compatible circuit breaker equipment configuration rather than an independent electrical rating of the installation kit. The kit does not itself provide overcurrent protection. Before assembly, verify the selected XT5 circuit breaker variant, rotary operating accessories, required mounting components and installation instructions against ABB's applicable technical documentation.
| Product group | System pro E power |
|---|---|
| ABB order code | 1STQ007152B0000 |
| Manufacturer designation | XT5 KIT 3-4P WITH+RHD(400A)VER.W=800MM |
| Product type | Circuit breaker installation kit |
| Compatible circuit breaker family | ABB XT5 |
| Compatible pole configurations | 3P / 4P |
| Compatible equipment current designation | 400 A |
| Operating arrangement | Right-hand rotary handle drive (RHD) |
| Installation orientation | Vertical |
| Assembly width designation | 800 mm |
| Manufacturer configuration notation | WITH+RHD |
| Compatible switchgear system | ABB System pro E power |
| Application | Low-voltage electrical distribution and switchgear assemblies |
The ABB 1STQ007152B0000 is an installation kit for compatible ABB XT5 three-pole or four-pole moulded-case circuit breakers with a right-hand rotary handle drive arrangement, designed for vertical integration into System pro E power low-voltage switchgear assemblies.
Yes. The manufacturer's 3-4P designation identifies the intended three-pole (3P) and four-pole (4P) XT5 equipment configurations. The exact compatible breaker variants should be confirmed against ABB's assembly documentation.
The 400 A designation identifies the compatible circuit breaker equipment configuration associated with this installation kit. It does not mean the kit itself has an independent 400 A current rating or provides circuit protection.
RHD identifies the right-hand rotary handle drive arrangement specified for the installation configuration. The compatible circuit breaker and associated rotary operating components must be selected according to the relevant ABB technical instructions.
The ABB 1STQ007152B0000 is designated for vertical (VER) installation within a compatible 800 mm-wide System pro E power switchgear assembly. The width describes the intended assembly configuration rather than necessarily the external dimensions of the kit itself.
ABB System pro E power installation accessories provide application-specific solutions for professional low-voltage switchgear construction. The 1STQ007152B0000 XT5 installation kit supports compatible three-pole and four-pole, 400 A circuit breaker equipment with a right-hand rotary handle drive arrangement in a vertical, 800 mm-wide switchgear configuration, helping panel builders coordinate circuit breaker installation with the intended modular assembly.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.