Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007152A0000 ABB PTBO7530 System Pro E Power IP65 Open Top/Bottom Panel 750 x 300 mm
ABB PTBO7530 (1STQ007152A0000) System Pro E Power open top/bottom panel manufactured from pickled sheet steel for 750 mm wide and 300 mm deep low-voltage switchboard configurations, designed for IP65 enclosure assemblies when fitted with the required cable-entry protection accessories.
£106.90
ABB PTBO7530 IP65 Open Top/Bottom Panel – System Pro E Power 750 mm x 300 mm
The ABB PTBO7530, manufacturer order code 1STQ007152A0000, is an open top/bottom enclosure panel designed for the ABB System Pro E Power low-voltage switchboard system. Specified as IP65 OPEN TOP/BOTTOM W=750MM D=300MM, this accessory provides a dedicated opening arrangement for compatible switchboard structures measuring 750 mm wide and 300 mm deep.
Manufactured from pickled sheet steel with preformed openings, the PTBO7530 is intended for installation at either the top or bottom of a compatible switchboard enclosure. It supports cable entry and the integration of associated cable-entry components while maintaining compatibility with the modular System Pro E Power construction system.
The PTBO7530 is designed for use in IP65 enclosure configurations when installed with the appropriate ABB cable-entry flanges and associated components. The open panel alone does not provide an IP65 seal. For professional panel builders, this accessory offers a manufacturer-matched solution for constructing correctly configured industrial and commercial electrical distribution enclosures.
Key Advantages
- Dedicated ABB System Pro E Power accessory for professional switchboard construction.
- Suitable for installation at either the top or bottom of a compatible enclosure.
- Designed for 750 mm width and 300 mm depth configurations.
- Supports IP65 switchboard assemblies when combined with the required sealing and cable-entry accessories.
- Manufactured from pickled sheet steel for robust mechanical construction.
- Features an open design suitable for compatible cable-entry arrangements.
- Allows panel builders to configure top and bottom openings independently.
- Integrates with the modular ABB System Pro E Power enclosure platform.
- Supports organised cable routing within low-voltage distribution installations.
- Provides a manufacturer-specific solution for new switchboard construction and compatible enclosure refurbishment.
Key Features
- Product type: Open top/bottom enclosure panel.
- ABB type designation: PTBO7530.
- ABB order code: 1STQ007152A0000.
- Product range: System Pro E Power.
- Manufacturer description: IP65 OPEN TOP/BOTTOM W=750MM D=300MM.
- Panel width: 750 mm.
- Panel depth: 300 mm.
- Material: Pickled sheet steel.
- Panel design: Open, with preformed openings.
- Installation position: Top or bottom.
- Intended enclosure protection: IP65 with the required complementary accessories.
- Quantity: One top/bottom component per order unit.
- Suitable for compatible cable-entry flange arrangements.
- Designed for professional low-voltage switchboard assembly.
Technical Specifications
- Manufacturer: ABB
- Product group: System Pro E Power
- Series: System Pro E Power
- Type / model: PTBO7530
- Manufacturer order code: 1STQ007152A0000
- Manufacturer designation: IP65 OPEN TOP/BOTTOM W=750MM D=300MM
- Product category: Switchboard enclosure accessories
- Product type: Open top/bottom panel
- Panel width: 750 mm
- Panel depth: 300 mm
- Material: Pickled sheet steel
- Construction: Sheet-steel panel with openings
- Mounting location: Top or bottom of a compatible enclosure
- IP protection configuration: IP65 when assembled with the appropriate protective components
- Standalone IP protection: Not guaranteed without the required cable-entry covers or flanges
- Units supplied: 1 panel
- Installation system: ABB System Pro E Power modular switchboards
- Compatible cable-entry accessory: ABB PFCF7530 fixed incoming cable flange, subject to the complete enclosure configuration
- Primary function: Provision of a top or bottom opening arrangement for cable-entry applications
- Application: Low-voltage electrical distribution enclosures
IP65 Cable Entry and Top/Bottom Enclosure Integration
The ABB PTBO7530 open top/bottom panel provides a practical enclosure interface for cable-entry arrangements in compatible System Pro E Power switchboards. Its preformed openings allow the panel to be used alongside dedicated cable-entry flanges, enabling the enclosure to be configured according to the installation's cable-routing requirements.
One important feature of the PTBO7530 is its dual-position application. The same component can be installed as either a top panel or a bottom panel. Where both positions require this particular open-panel configuration, two units must be ordered, as the product designation refers to one individual component rather than a combined top-and-bottom set.
The IP65 designation identifies the protection level achievable by a correctly assembled switchboard using the appropriate components. Under IEC 60529, IP65 indicates dust-tight protection and protection against water jets. However, the PTBO7530 open panel does not independently provide IP65 protection, because its openings must be closed or protected using the specified cable-entry accessories.
For IP65 cable-entry applications, ABB identifies dedicated fixed incoming cable flanges within its PFCF accessory range. The corresponding PFCF7530 is the fixed incoming cable flange associated with the 750 mm by 300 mm configuration. The final selection and installation of cable-entry components must follow the relevant ABB System Pro E Power assembly instructions.
Manufactured from pickled sheet steel, the PTBO7530 forms part of the mechanical enclosure system rather than the electrical protection circuit. It does not provide switching, isolation, overload protection or short-circuit protection. Its function is to support the correct construction of the switchboard enclosure and its cable-entry arrangement.
Typical Applications
- ABB System Pro E Power low-voltage switchboard construction.
- Top cable-entry arrangements in compatible electrical enclosures.
- Bottom cable-entry arrangements in compatible electrical enclosures.
- IP65-rated switchboard assemblies using appropriate complementary sealing components.
- Industrial electrical distribution cabinets.
- Commercial building power distribution switchboards.
- Main and secondary electrical distribution assemblies.
- Manufacturing plant electrical infrastructure.
- OEM electrical panel building and switchboard manufacturing.
- Switchboard upgrades, modifications and compatible enclosure component replacement.
Frequently Asked Questions
What is the ABB PTBO7530 used for?
The ABB PTBO7530 is an open top/bottom enclosure panel used in compatible ABB System Pro E Power low-voltage switchboards. It provides an opening arrangement for a 750 mm wide and 300 mm deep configuration, supporting compatible cable-entry installations.
What is the ABB order code for PTBO7530?
The ABB manufacturer order code is 1STQ007152A0000. The corresponding type designation is PTBO7530, described as IP65 OPEN TOP/BOTTOM W=750MM D=300MM.
What are the dimensions of the ABB PTBO7530?
The PTBO7530 is specified with a 750 mm width and 300 mm depth for the designated System Pro E Power top/bottom panel configuration.
Can the PTBO7530 be installed at both the top and bottom of a switchboard?
Yes. The PTBO7530 can be used at either the top or the bottom of a compatible switchboard enclosure. Each order unit contains one panel, so two units are required if the same component is needed at both positions.
Does the ABB PTBO7530 provide IP65 protection on its own?
No. Although the PTBO7530 is intended for IP65 enclosure configurations, the open panel alone does not guarantee an IP protection rating. The correct cable-entry flanges, covers and associated enclosure components must be fitted to achieve the specified protection level.
Which cable-entry flange is associated with the PTBO7530?
The ABB PFCF7530 fixed incoming cable flange is associated with the 750 mm by 300 mm configuration. The complete installation must be checked against the applicable ABB System Pro E Power assembly documentation to confirm the required components.
What material is the ABB PTBO7530 manufactured from?
The PTBO7530 is manufactured from pickled sheet steel and incorporates openings intended for compatible switchboard cable-entry arrangements.
How many panels are supplied under order code 1STQ007152A0000?
The manufacturer catalogue specifies one open top/bottom panel per order unit. If both a top and bottom panel are required, the necessary quantities must be ordered separately.
What does IP65 mean for the completed switchboard?
Under IEC 60529, IP65 indicates a dust-tight enclosure with protection against water jets. The completed switchboard can only achieve its intended IP65 rating when all required enclosure panels, cable-entry components and sealing arrangements are correctly installed.
Can the ABB PTBO7530 be used with any electrical enclosure?
The PTBO7530 is specifically identified for the ABB System Pro E Power switchboard system. Its use should be limited to compatible enclosure structures and configurations specified by ABB.
Trusted by Electrical Panel Builders Worldwide
ABB System Pro E Power enclosure accessories provide coordinated mechanical solutions for professional low-voltage switchboard construction. The ABB PTBO7530 offers a dedicated 750 mm by 300 mm open top/bottom panel for compatible IP65 enclosure configurations, supporting organised cable entry and reliable switchboard assembly when used with the appropriate ABB protective accessories.
