Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
1STQ007151A0000 ABB PTBO6090 IP65 Open Top/Bottom Panel 600 x 900 mm System pro E power
ABB PTBO6090 IP65 open top/bottom enclosure panel, order code 1STQ007151A0000, designed for compatible 600 mm-wide and 900 mm-deep System pro E power low-voltage electrical distribution switchboards.
£115.50
Why Choose the ABB PTBO6090 IP65 Open Top/Bottom Panel?
The ABB PTBO6090, manufacturer order code 1STQ007151A0000, is a dedicated IP65 open top/bottom enclosure panel designed for ABB System pro E power low-voltage electrical distribution switchboards. This enclosure accessory provides an open panel arrangement for compatible modular switchboard cabinets with a nominal width of 600 mm and depth of 900 mm.
As part of the ABB System pro E power modular switchboard range, the PTBO6090 supports professional electrical panel construction and flexible enclosure configuration. Its open design is intended for installations requiring an opening at the top or bottom of a switchboard, providing a suitable interface for the integration of compatible cable-entry systems, enclosure accessories or additional closing components.
The ABB PTBO6090 IP65 open top/bottom panel is specified for 600 mm-wide × 900 mm-deep System pro E power cabinet configurations. Designed for use in IP65 enclosure arrangements, it supports coordinated switchboard assembly while allowing electrical panel builders to incorporate appropriate sealing and cable-management solutions to meet the protection requirements of the completed installation.
Key Advantages
- Genuine ABB System pro E power enclosure accessory for modular electrical switchboards.
- Designed for IP65 enclosure configurations when correctly assembled with compatible components.
- Specified for 600 mm-wide × 900 mm-deep switchboard sections.
- Open top/bottom panel design supports flexible cabinet integration.
- Suitable for arrangements incorporating compatible cable-entry or enclosure interface accessories.
- Supports installation at the top or bottom of compatible electrical distribution cabinets.
- Helps simplify enclosure component selection and coordinated switchboard construction.
- Designed for integration with compatible ABB System pro E power structural components.
- Suitable for industrial and commercial low-voltage power distribution applications.
Key Features
- ABB PTBO6090 open enclosure panel.
- System pro E power modular switchboard series.
- IP65 specified protection classification.
- 600 mm nominal cabinet width.
- 900 mm nominal cabinet depth.
- Open top/bottom panel configuration.
- Designed for compatible modular low-voltage switchboard structures.
- Supports integration with appropriate enclosure closing and cable-entry components.
- Suitable for top or bottom cabinet installation.
- Application-specific design for electrical distribution assemblies.
- Manufacturer order code 1STQ007151A0000.
Flexible Enclosure Integration for IP65 Power Distribution Systems
The ABB System pro E power range provides a modular platform for constructing low-voltage electrical distribution switchboards. Its coordinated enclosure components allow electrical panel builders to configure cabinets for different installation requirements while maintaining compatibility across the switchboard structure.
The ABB PTBO6090 open top/bottom panel provides a dedicated enclosure component for compatible cabinet sections measuring 600 mm in width and 900 mm in depth. Unlike a blind closing panel, its open configuration is intended for installations where an opening is required in the upper or lower section of the switchboard.
The IP65 classification indicates dust-tight protection and resistance to water jets when achieved by a correctly assembled enclosure. Because the PTBO6090 features an open configuration, the panel alone does not provide IP65 protection across an uncovered opening. Appropriate compatible sealing, closing or cable-entry components must be selected and installed to maintain the required protection level.
The 900 mm cabinet depth makes this panel suitable for the corresponding deeper System pro E power enclosure configurations, where additional internal space may be required for electrical equipment, conductors and power distribution components. The actual cabinet layout and component clearances must be established according to the applicable ABB assembly documentation.
By using a dedicated ABB enclosure accessory, switchboard manufacturers can maintain a coordinated cabinet design and simplify integration with compatible System pro E power components. Installation should follow the relevant ABB instructions, including requirements for enclosure openings, sealing and the protection classification of the complete switchboard.
Typical Applications
- ABB System pro E power modular electrical switchboards.
- Industrial low-voltage power distribution cabinets.
- Commercial building electrical distribution assemblies.
- Top and bottom enclosure opening arrangements.
- 600 mm-wide and 900 mm-deep modular cabinet sections.
- Switchboards requiring compatible cable-entry or enclosure interface arrangements.
- Electrical distribution cabinets designed for IP65 protection when correctly assembled.
- Industrial electrical installations requiring deeper switchboard enclosure configurations.
- Electrical panel manufacturing and switchboard construction projects.
- Replacement or installation of compatible open enclosure panels.
Technical Specifications
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ007151A0000 |
| Product type | Open top/bottom enclosure panel |
| Product description | IP65 OPEN TOP/BOTTOM W=600MM D=900MM |
| Specified protection classification | IP65 |
| Compatible cabinet width | 600 mm |
| Compatible cabinet depth | 900 mm |
| Panel configuration | Open |
| Installation position | Top or bottom |
| Compatible enclosure system | ABB System pro E power |
| Application | Low-voltage switchboard enclosure assembly |
| Product category | Electrical Enclosure Accessories |
| ABB product group | System Pro E Power |
Frequently Asked Questions
What is the ABB PTBO6090 used for?
The ABB PTBO6090 is an IP65-designated open top/bottom enclosure panel used in compatible ABB System pro E power low-voltage switchboards where an opening is required at the top or bottom of the cabinet.
What cabinet dimensions is the ABB PTBO6090 designed for?
The PTBO6090 is specified for compatible System pro E power cabinets with a 600 mm width and 900 mm depth. These measurements identify the intended cabinet configuration rather than necessarily representing the exact external dimensions of the panel.
What does the IP65 protection classification mean?
IP65 indicates dust-tight protection and resistance to water jets when achieved by a correctly assembled enclosure. Suitable sealing and compatible accessories are required to maintain this protection level in the completed installation.
What is the difference between an open panel and a blind panel?
An open panel provides an opening for a suitable enclosure interface or cable-entry arrangement, while a blind panel provides a closed surface without an intentional opening. The PTBO6090 is the open configuration.
Can the ABB PTBO6090 be installed at the top or bottom of a switchboard?
Yes. The PTBO6090 is designated as an open top/bottom panel for use in either position within a compatible ABB System pro E power enclosure arrangement.
Does the ABB PTBO6090 alone provide IP65 protection?
No. Although the PTBO6090 is specified for an IP65 enclosure configuration, its open design means that suitable closing, sealing or cable-entry components may be necessary. The final protection rating depends on the complete assembled switchboard.
What is the ABB order code for the PTBO6090?
The manufacturer order code for the ABB PTBO6090 IP65 open top/bottom panel is 1STQ007151A0000.
Trusted by Electrical Panel Builders Worldwide
ABB System pro E power enclosure accessories support professional low-voltage electrical distribution assemblies. The ABB PTBO6090 IP65 open top/bottom panel provides a coordinated enclosure solution for compatible 600 mm-wide and 900 mm-deep cabinet sections, supporting flexible switchboard integration and appropriately protected electrical installations.
