Standard delivery
£8 ex VAT · free over £200UK parcel delivery is £8 ex VAT, or free on orders over £200 ex VAT.
Heavier items may be charged at a weight-based or pallet rate, shown at checkout.
ABB 1STQ007150B0000 System pro E power vertical installation kit for compatible 3-pole and 4-pole 630 A Tmax XT5 plug-in circuit breakers with a 400 mm installation height, 800 mm installation width and N1 M configuration.
£264.58
The ABB 1STQ007150B0000 is a dedicated XT5 630 plug-in circuit breaker installation kit designed for ABB System pro E power low-voltage electrical distribution switchboards. This installation accessory supports the vertical mounting of compatible ABB Tmax XT5 630 A moulded case circuit breakers (MCCBs) in 3-pole or 4-pole plug-in configurations.
As part of the ABB System pro E power modular switchboard range, this kit provides a coordinated installation arrangement for plug-in circuit breakers used in industrial and commercial power distribution systems. Its application-specific design helps electrical panel builders integrate protective switching equipment within compatible switchboard structures while maintaining an organised cabinet layout.
The ABB XT5 installation kit, order code 1STQ007150B0000, is specified for 3-pole and 4-pole Tmax XT5 630 A plug-in circuit breakers, with a vertical installation arrangement, 400 mm installation height and 800 mm installation width. The manufacturer designation also identifies the N1 M configuration, which should be matched to the appropriate ABB System pro E power assembly documentation.
The ABB System pro E power range provides a modular platform for constructing low-voltage electrical distribution switchboards. Its coordinated structural components and circuit breaker installation accessories enable electrical panel builders to configure assemblies for different industrial and commercial power distribution requirements.
The ABB 1STQ007150B0000 installation kit is designed for the vertical integration of compatible Tmax XT5 630 A plug-in circuit breakers in either 3-pole or 4-pole configurations. Plug-in circuit breaker arrangements use a compatible plug-in base and electrical connection system, allowing the breaker to be removed from its installed position in accordance with the manufacturer's instructions and appropriate electrical safety procedures.
Unlike a fixed-mounted circuit breaker arrangement, a plug-in configuration incorporates a suitable base and connection interface for the removable breaker. This can support inspection, servicing and replacement activities where the switchboard has been designed with the correct compatible components and maintenance procedures.
The specified 400 mm height and 800 mm width identify the intended installation arrangement for this kit. The N1 M designation forms part of ABB's configuration identification and should be checked against the applicable switchboard assembly documentation when selecting associated equipment.
This product is an installation accessory rather than a complete circuit breaker. Electrical protection characteristics, rated breaking capacity, trip-unit functionality and operating features depend on the separately selected Tmax XT5 circuit breaker and its associated plug-in equipment. The manufacturer's configuration designation should not be interpreted as confirmation that a particular motor operator or other operating accessory is included.
| Series | System pro E power |
|---|---|
| ABB order code | 1STQ007150B0000 |
| Product description | KIT XT5 630 PLUG-IN 3/4PV H400 W800 N1 M |
| Product type | Plug-in circuit breaker installation kit |
| Compatible circuit breaker series | ABB Tmax XT5 |
| Compatible circuit breaker type | Moulded case circuit breaker (MCCB) |
| Compatible circuit breaker rating | 630 A |
| Compatible pole configurations | 3-pole / 4-pole |
| Circuit breaker installation configuration | Plug-in |
| Installation orientation | Vertical |
| Nominal installation height | 400 mm |
| Nominal installation width | 800 mm |
| Manufacturer configuration designation | N1 M |
| Compatible enclosure system | ABB System pro E power |
| Application | Low-voltage electrical distribution switchboards |
| Product category | Switchboard Installation Accessories |
| ABB product group | System Pro E Power |
The ABB 1STQ007150B0000 is an installation kit designed for vertical mounting of compatible 3-pole or 4-pole, 630 A Tmax XT5 plug-in circuit breakers within ABB System pro E power low-voltage switchboards.
The kit is specified for ABB Tmax XT5 630 A moulded case circuit breakers in 3-pole and 4-pole plug-in configurations. The exact breaker version and associated plug-in components should be checked against ABB installation documentation.
The manufacturer designation specifies a 400 mm installation height and 800 mm installation width. These values describe the intended installation arrangement rather than necessarily representing the external dimensions of every individual kit component.
Yes. The kit is specifically designated for vertical installation of a compatible ABB Tmax XT5 630 A plug-in circuit breaker.
A plug-in circuit breaker is designed for use with a compatible plug-in base and electrical connection arrangement that allows the breaker to be removed from its installed position in accordance with the manufacturer's instructions and appropriate isolation procedures.
N1 M is the configuration identifier included in ABB's product designation for this installation kit. Its exact application and the required associated components should be verified against the relevant ABB System pro E power assembly documentation.
The 1STQ007150B0000 is identified as a circuit breaker installation kit, not a complete MCCB assembly. The compatible Tmax XT5 circuit breaker, plug-in components and any additional operating accessories should be selected according to the applicable ABB bill of materials.
ABB System pro E power switchboard accessories support the construction of professional low-voltage electrical distribution assemblies. The ABB 1STQ007150B0000 installation kit provides a dedicated vertical mounting arrangement for compatible 3-pole and 4-pole, 630 A Tmax XT5 plug-in circuit breakers within a 400 mm × 800 mm installation configuration.
We use cookies
We use essential cookies to run this site, your basket and checkout. With your permission we'd also like to use analytics and advertising cookies to understand how the site is used and to measure our adverts.